Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AT29BV010A-25JC
詳細を表示 DataSheets

AT29BV010A-25JC

Product Overview

Category

AT29BV010A-25JC belongs to the category of non-volatile memory devices.

Use

It is primarily used for storing and retrieving data in electronic systems.

Characteristics

  • Non-volatile: Retains data even when power is turned off.
  • High-speed operation: Offers fast read and write access times.
  • Low power consumption: Optimized for energy efficiency.
  • Wide temperature range: Suitable for various operating environments.

Package

AT29BV010A-25JC is available in a 32-pin PLCC (Plastic Leaded Chip Carrier) package.

Essence

The essence of AT29BV010A-25JC lies in its ability to provide reliable and efficient non-volatile memory storage for electronic devices.

Packaging/Quantity

This product is typically packaged in reels, with each reel containing a specific quantity of AT29BV010A-25JC units. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Memory capacity: 1 Megabit (128K x 8)
  • Operating voltage: 2.7V - 3.6V
  • Access time: 70 ns
  • Erase/Write cycles: 10,000 minimum
  • Data retention: 20 years minimum

Detailed Pin Configuration

The AT29BV010A-25JC has a total of 32 pins, which are assigned specific functions as follows:

  1. A16
  2. A14
  3. A12
  4. A7
  5. A6
  6. A5
  7. A4
  8. A3
  9. A2
  10. A1
  11. A0
  12. VCC
  13. OE#
  14. CE#
  15. WE#
  16. I/O0
  17. I/O1
  18. I/O2
  19. I/O3
  20. I/O4
  21. I/O5
  22. I/O6
  23. I/O7
  24. NC
  25. GND
  26. A15
  27. A13
  28. A8
  29. A9
  30. A11
  31. A10
  32. RP#

Functional Features

  • Byte-wide access: Allows individual byte-level read and write operations.
  • Chip enable (CE#) control: Enables or disables the memory device.
  • Output enable (OE#) control: Enables or disables the output data.
  • Write enable (WE#) control: Enables or disables the write operation.
  • Automatic page write: Supports efficient programming of multiple bytes at once.

Advantages and Disadvantages

Advantages

  • Non-volatile nature ensures data retention even during power loss.
  • High-speed operation facilitates quick data access.
  • Low power consumption helps conserve energy.
  • Wide temperature range makes it suitable for various applications.

Disadvantages

  • Limited erase/write cycles may restrict certain high-intensity usage scenarios.
  • Relatively small memory capacity compared to other storage devices.

Working Principles

AT29BV010A-25JC utilizes Flash memory technology, which allows for electrically erasing and reprogramming of data. It employs a combination of transistors and floating gate structures to store and retrieve information.

Detailed Application Field Plans

AT29BV010A-25JC finds application in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to AT29BV010A-25JC are: - AT29C010A-12PC - AT28C010E-15PU - AT27C010-70PU

These models provide comparable memory capacity, operating characteristics, and pin configurations.

Word count: 446 words

技術ソリューションにおける AT29BV010A-25JC の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AT29BV010A-25JC in technical solutions:

  1. Q: What is the AT29BV010A-25JC? A: The AT29BV010A-25JC is a 1-megabit (128K x 8) CMOS flash memory chip manufactured by Atmel.

  2. Q: What are the key features of the AT29BV010A-25JC? A: Some key features include a 25ns access time, low power consumption, byte-wide data access, and compatibility with a wide range of microcontrollers.

  3. Q: How can I interface the AT29BV010A-25JC with a microcontroller? A: The AT29BV010A-25JC uses a standard parallel interface, making it compatible with most microcontrollers. You can connect it using address, data, and control lines.

  4. Q: What voltage levels does the AT29BV010A-25JC support? A: The AT29BV010A-25JC supports a single power supply voltage of 2.7V to 3.6V.

  5. Q: Can I use the AT29BV010A-25JC in battery-powered applications? A: Yes, the AT29BV010A-25JC has low power consumption, making it suitable for battery-powered devices.

  6. Q: How much data can the AT29BV010A-25JC store? A: The AT29BV010A-25JC has a capacity of 1 megabit, which is equivalent to 128 kilobytes.

  7. Q: Is the AT29BV010A-25JC erasable and programmable? A: Yes, the AT29BV010A-25JC supports both byte-level erasure and programming.

  8. Q: What is the endurance of the AT29BV010A-25JC? A: The AT29BV010A-25JC has a minimum endurance of 10,000 erase/write cycles.

  9. Q: Can I use the AT29BV010A-25JC in industrial temperature environments? A: Yes, the AT29BV010A-25JC is rated for industrial temperature range (-40°C to +85°C), making it suitable for harsh environments.

  10. Q: Are there any specific precautions I should take when using the AT29BV010A-25JC? A: It is recommended to follow the datasheet guidelines provided by Atmel, including proper power supply decoupling, handling precautions, and voltage level compatibility with your microcontroller.

Please note that these answers are general and may vary depending on the specific application and requirements. Always refer to the official datasheet and documentation for accurate information.