Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AT45DB041A-TI
詳細を表示 DataSheets

AT45DB041A-TI

Product Overview

Category

AT45DB041A-TI belongs to the category of flash memory devices.

Use

It is primarily used for data storage and retrieval in various electronic devices.

Characteristics

  • Non-volatile memory
  • High-speed data transfer
  • Low power consumption
  • Small form factor
  • Reliable and durable

Package

AT45DB041A-TI is available in a compact package, suitable for surface mount technology (SMT) applications.

Essence

The essence of AT45DB041A-TI lies in its ability to provide reliable and high-performance data storage solutions for electronic devices.

Packaging/Quantity

This product is typically packaged in reels or trays, with a quantity of 2500 units per reel/tray.

Specifications

  • Memory capacity: 4 megabits (512 kilobytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating voltage: 2.7V - 3.6V
  • Operating temperature range: -40°C to +85°C
  • Data retention: Up to 20 years
  • Erase/program cycles: 10,000 minimum

Detailed Pin Configuration

The AT45DB041A-TI has a total of 8 pins, each serving a specific purpose:

  1. Chip Select (/CS): Used to enable or disable the device.
  2. Serial Clock (SCK): Provides the clock signal for data transfer.
  3. Serial Data Input (SI): Transfers data from the microcontroller to the device.
  4. Serial Data Output (SO): Transfers data from the device to the microcontroller.
  5. Write Protect (/WP): Enables or disables write protection.
  6. Reset (/RESET): Resets the device to its default state.
  7. VCC: Power supply input.
  8. GND: Ground reference.

Functional Features

  • Page program operation for fast data storage.
  • Continuous read mode for efficient data retrieval.
  • Sector erase capability for flexible memory management.
  • Software and hardware protection mechanisms to prevent unauthorized access.
  • Deep power-down mode for ultra-low power consumption during standby.

Advantages and Disadvantages

Advantages

  • High-speed data transfer allows for quick read/write operations.
  • Low power consumption prolongs battery life in portable devices.
  • Compact form factor enables integration into space-constrained designs.
  • Reliable and durable, ensuring data integrity over extended periods.

Disadvantages

  • Limited memory capacity compared to higher-end flash memory devices.
  • Erase/program cycle limitations may restrict frequent data modifications.
  • Higher cost per megabit compared to traditional non-flash memory options.

Working Principles

AT45DB041A-TI utilizes the Serial Peripheral Interface (SPI) to communicate with a microcontroller. It stores data in non-volatile memory cells, which retain information even when power is removed. The device employs various algorithms and error correction techniques to ensure data integrity and reliability.

Detailed Application Field Plans

AT45DB041A-TI finds applications in various electronic devices, including but not limited to: - Smartphones and tablets - Digital cameras - Portable media players - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  1. AT45DB081A-TI: Offers double the memory capacity of AT45DB041A-TI.
  2. AT45DB161A-TI: Provides four times the memory capacity of AT45DB041A-TI.
  3. AT45DB321A-TI: Offers eight times the memory capacity of AT45DB041A-TI.

These alternative models cater to different memory requirements while maintaining similar characteristics and functionality.

Word count: 536 words

技術ソリューションにおける AT45DB041A-TI の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AT45DB041A-TI in technical solutions:

  1. Q: What is the AT45DB041A-TI? A: The AT45DB041A-TI is a serial interface Flash memory device with 4 megabits (512K x 8) of memory.

  2. Q: What are the main features of the AT45DB041A-TI? A: The main features include a high-speed SPI interface, low power consumption, sector-based architecture, and a wide operating voltage range.

  3. Q: How can I interface the AT45DB041A-TI with my microcontroller? A: You can interface it using the Serial Peripheral Interface (SPI) protocol, which is commonly supported by most microcontrollers.

  4. Q: What is the maximum data transfer rate of the AT45DB041A-TI? A: The maximum data transfer rate is 66 MHz for the SPI interface.

  5. Q: Can I use the AT45DB041A-TI as a storage solution for my data logging application? A: Yes, the AT45DB041A-TI is suitable for data logging applications due to its large memory capacity and sector-based erase functionality.

  6. Q: Does the AT45DB041A-TI support wear-leveling algorithms? A: No, the AT45DB041A-TI does not have built-in wear-leveling algorithms. However, you can implement wear-leveling techniques in your software if required.

  7. Q: What is the typical power consumption of the AT45DB041A-TI? A: The typical power consumption is around 5 mA during active read/write operations and less than 1 µA in standby mode.

  8. Q: Can I use the AT45DB041A-TI in harsh environments? A: The AT45DB041A-TI has an extended temperature range of -40°C to +85°C, making it suitable for operation in harsh environments.

  9. Q: Does the AT45DB041A-TI support hardware or software write protection? A: Yes, the AT45DB041A-TI supports both hardware and software write protection mechanisms to prevent accidental data modification.

  10. Q: Are there any development tools or libraries available for working with the AT45DB041A-TI? A: Yes, Atmel provides a variety of development tools, including datasheets, application notes, and software libraries, to assist you in working with the AT45DB041A-TI.

Please note that these answers are general and may vary depending on specific implementation details and requirements.