Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AT45DB041B-CNI
詳細を表示 DataSheets

AT45DB041B-CNI

Product Overview

  • Category: Integrated Circuit
  • Use: Data Storage
  • Characteristics: Non-volatile, Serial Interface
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Flash Memory
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Memory Size: 4 Megabits (512 Kilobytes)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage: 2.7V to 3.6V
  • Operating Temperature: -40°C to +85°C
  • Data Retention: More than 20 years
  • Endurance: 100,000 write cycles

Pin Configuration

The AT45DB041B-CNI has the following pin configuration:

  1. Chip Select (/CS)
  2. Output Enable (/OE)
  3. Write Protect (/WP)
  4. Serial Data Input (SI)
  5. Serial Data Output (SO)
  6. Serial Clock (SCK)
  7. Ground (GND)
  8. Power Supply (VCC)

Functional Features

  • Dual-interface: Supports both SPI and RapidS serial interface modes.
  • Page Program Operation: Allows programming of up to 256 bytes in a single operation.
  • Continuous Read Mode: Enables sequential reading of data from multiple pages without the need for readdressing.
  • Sector Erase Capability: Provides the ability to erase large blocks of memory (64KB) at once.
  • Software Protection: Offers software-controlled protection against accidental erasure or modification of data.

Advantages and Disadvantages

Advantages: - High-speed data transfer rate - Low power consumption - Compact package size - Wide operating temperature range

Disadvantages: - Limited storage capacity compared to other flash memory options - Relatively higher cost per megabit compared to larger capacity chips

Working Principles

The AT45DB041B-CNI is based on the principles of flash memory technology. It utilizes a combination of floating-gate transistors and charge storage to store data in non-volatile memory cells. The serial interface allows for easy integration with microcontrollers and other digital devices.

Application Field Plans

The AT45DB041B-CNI is commonly used in various applications, including but not limited to: - Consumer electronics (e.g., digital cameras, MP3 players) - Industrial automation systems - Automotive electronics - Medical devices - Communication equipment

Alternative Models

Some alternative models that offer similar functionality to the AT45DB041B-CNI include: - AT25SF041 - MX25L4006E - W25Q40EW

These models can be considered as alternatives depending on specific requirements and compatibility with existing systems.

In conclusion, the AT45DB041B-CNI is a 4 Megabit flash memory integrated circuit primarily used for data storage. Its compact size, dual-interface capability, and sector erase feature make it suitable for a wide range of applications. However, its limited storage capacity and relatively higher cost per megabit should be taken into consideration when choosing an appropriate memory solution.

技術ソリューションにおける AT45DB041B-CNI の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AT45DB041B-CNI in technical solutions:

  1. Q: What is the AT45DB041B-CNI? A: The AT45DB041B-CNI is a serial flash memory chip manufactured by Adesto Technologies. It has a capacity of 4 megabits (512 kilobytes) and operates on a standard SPI interface.

  2. Q: What are some typical applications for the AT45DB041B-CNI? A: The AT45DB041B-CNI is commonly used in various embedded systems, IoT devices, industrial automation, consumer electronics, and other applications that require non-volatile storage.

  3. Q: What is the operating voltage range of the AT45DB041B-CNI? A: The AT45DB041B-CNI operates within a voltage range of 2.7V to 3.6V.

  4. Q: How fast can data be read from the AT45DB041B-CNI? A: The AT45DB041B-CNI supports a maximum clock frequency of 85 MHz, allowing for fast data read operations.

  5. Q: Can the AT45DB041B-CNI be easily interfaced with microcontrollers? A: Yes, the AT45DB041B-CNI uses a standard SPI interface, which is widely supported by most microcontrollers, making it easy to integrate into various projects.

  6. Q: Does the AT45DB041B-CNI support both sequential and random access modes? A: Yes, the AT45DB041B-CNI supports both sequential and random access modes, providing flexibility in accessing data stored in the memory.

  7. Q: What is the endurance rating of the AT45DB041B-CNI? A: The AT45DB041B-CNI has an endurance rating of 100,000 write cycles per sector, ensuring reliable and long-lasting data storage.

  8. Q: Can the AT45DB041B-CNI operate in harsh environments? A: Yes, the AT45DB041B-CNI is designed to operate in a wide temperature range (-40°C to +85°C) and can withstand vibration and shock, making it suitable for rugged applications.

  9. Q: Does the AT45DB041B-CNI have any built-in security features? A: No, the AT45DB041B-CNI does not have built-in security features. If data security is required, additional measures need to be implemented at the system level.

  10. Q: Are there any development tools or libraries available for working with the AT45DB041B-CNI? A: Yes, Adesto Technologies provides various development tools, documentation, and software libraries to assist developers in integrating and programming the AT45DB041B-CNI in their projects.

Please note that these answers are general and may vary depending on specific implementation details and requirements.