AT49BV1604A-70TI

Product Overview

Category

AT49BV1604A-70TI belongs to the category of non-volatile memory devices.

Use

This product is primarily used for storing and retrieving data in electronic systems.

Characteristics

• Non-volatile: The AT49BV1604A-70TI retains data even when power is removed.
• High capacity: It has a storage capacity of 16 megabits (2 megabytes).
• Fast access time: The device offers a fast access time of 70 nanoseconds.
• Low power consumption: It operates at low power levels, making it suitable for battery-powered devices.

Package

The AT49BV1604A-70TI comes in a compact Thin Small Outline Package (TSOP) form factor.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic systems.

Packaging/Quantity

The AT49BV1604A-70TI is typically packaged in reels and is available in large quantities for industrial applications.

Specifications

• Memory Type: Flash
• Organization: 2M x 8 bits
• Supply Voltage: 2.7V - 3.6V
• Operating Temperature Range: -40°C to +85°C
• Data Retention: 20 years
• Erase/Program Cycles: 10,000 cycles

Pin Configuration

The AT49BV1604A-70TI has a total of 32 pins. The pin configuration is as follows:

1. A0
2. A1
3. A2
4. A3
5. A4
6. A5
7. A6
8. A7
9. A8
10. A9
11. A10
12. A11
13. A12
14. A13
15. A14
16. A15
17. CE#
18. OE#
19. WE#
20. RESET#
21. BYTE#
22. VCC
23. DQ0
24. DQ1
25. DQ2
26. DQ3
27. DQ4
28. DQ5
29. DQ6
30. DQ7
31. VSS
32. NC

Functional Features

• Fast Read and Write Operations: The AT49BV1604A-70TI offers high-speed read and write operations, allowing for efficient data access.
• Sector Erase Capability: It supports sector erase operations, enabling selective erasure of specific memory sectors.
• Hardware Data Protection: The device includes hardware protection features to prevent accidental writes or erasures.
• Low Power Consumption: The AT49BV1604A-70TI operates at low power levels, making it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages

• Non-volatile storage ensures data retention even during power loss.
• High capacity allows for storing large amounts of data.
• Fast access time enables quick retrieval of information.
• Low power consumption prolongs battery life in portable devices.

Disadvantages

• Limited erase/program cycles may affect the lifespan of the device.
• Higher cost compared to other types of memory technologies.
• Relatively larger physical size compared to newer memory technologies.

Working Principles

The AT49BV1604A-70TI utilizes flash memory technology to store data. It consists of a grid of memory cells that can be electrically programmed and erased. When data is written, an electrical charge is applied to the memory cell, altering its state. This altered state represents the stored data. Reading the data involves detecting the state of each memory cell.

Detailed Application Field Plans

The AT49BV1604A-70TI finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices

Detailed and Complete Alternative Models

1. AT49BV1604T-70TU: Similar specifications with a different package type (TSOP II).
2. AT49BV1604B-70TU: Similar specifications with a different organization (1M x 16 bits).
3. AT49BV1604A-90TI: Similar specifications with a higher access time (90 nanoseconds).

These alternative models offer similar functionality and can be considered as alternatives based on specific requirements.

In conclusion, the AT49BV1604A-70TI is a non-volatile memory device that provides high-capacity storage with fast access times. It offers advantages such as non-volatility, high capacity, and low power consumption. However, it has limitations in terms of erase/program cycles and physical size. The device finds applications in various electronic systems and has alternative models available for specific needs.