AT49BV1614A-12TI

Product Overview

Category

AT49BV1614A-12TI belongs to the category of non-volatile memory devices.

Use

This product is primarily used for storing and retrieving data in electronic systems.

Characteristics

• Non-volatile: The AT49BV1614A-12TI retains stored data even when power is removed.
• High capacity: It has a storage capacity of 16 megabits (2 megabytes).
• Fast access time: The device offers a fast access time of 120 nanoseconds.
• Low power consumption: It operates at low power levels, making it suitable for battery-powered devices.

Package

The AT49BV1614A-12TI is available in a compact Thin Small Outline Package (TSOP).

Essence

The essence of this product lies in its ability to provide reliable and non-volatile data storage in various electronic applications.

Packaging/Quantity

The AT49BV1614A-12TI is typically packaged in reels or trays, with a quantity of 250 units per reel/tray.

Specifications

• Memory Type: Flash
• Organization: 2M x 8
• Voltage Range: 2.7V - 3.6V
• Operating Temperature Range: -40°C to +85°C
• Access Time: 120 ns
• Erase/Program Suspend: Yes
• Data Retention: 20 years
• Package Type: TSOP

Detailed Pin Configuration

The AT49BV1614A-12TI has a total of 48 pins. Here is the detailed pin configuration:

1. A0-A19: Address Inputs
2. DQ0-DQ7: Data Input/Output
3. CE: Chip Enable
4. OE: Output Enable
5. WE: Write Enable
6. RP: Reset/Block Protect
7. VCC: Power Supply
8. GND: Ground

Functional Features

• Fast Read and Write Operations: The AT49BV1614A-12TI offers high-speed read and write operations, allowing for efficient data transfer.
• Sector Erase Capability: It supports sector erase operations, enabling selective erasure of specific memory sectors.
• Hardware Data Protection: The device incorporates hardware protection mechanisms to prevent accidental writes or erasures.
• Low Power Consumption: The AT49BV1614A-12TI operates at low power levels, making it suitable for power-constrained applications.

Advantages and Disadvantages

Advantages

• Non-volatile storage ensures data retention even during power loss.
• High capacity allows for storing large amounts of data.
• Fast access time enables quick retrieval of information.
• Low power consumption prolongs battery life in portable devices.

Disadvantages

• Limited endurance: Flash memory has a finite number of erase/write cycles.
• Relatively higher cost compared to other types of memory.

Working Principles

The AT49BV1614A-12TI utilizes flash memory technology to store data. It consists of a grid of memory cells that can be electrically programmed and erased. When data is written, charges are trapped in the floating gate of each memory cell, representing the stored information. To read the data, the charges are sensed and interpreted as binary values.

Detailed Application Field Plans

The AT49BV1614A-12TI finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices

Detailed and Complete Alternative Models

1. AT49BV1614T-12CI: Similar specifications, but available in a different package (Ceramic DIP).
2. AT49BV1614A-12CU: Same specifications, but offered in a different package (Plastic TSOP).

These alternative models provide similar functionality and can be considered as substitutes for the AT49BV1614A-12TI.

Word count: 530 words