画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AT49BV1614AT-90TI

AT49BV1614AT-90TI

Product Overview

Category

The AT49BV1614AT-90TI belongs to the category of non-volatile memory devices.

Use

This product is primarily used for storing and retrieving data in electronic systems.

Characteristics

  • Non-volatile: The AT49BV1614AT-90TI retains stored data even when power is turned off.
  • High capacity: It has a storage capacity of 16 megabits (2 megabytes).
  • Fast access time: The device offers a fast access time of 90 nanoseconds.
  • Low power consumption: It operates on low power, making it suitable for battery-powered devices.

Package

The AT49BV1614AT-90TI comes in a surface-mount TSOP package.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic systems.

Packaging/Quantity

The AT49BV1614AT-90TI is typically packaged in reels, with each reel containing a specific quantity of devices. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Memory Type: Flash
  • Organization: 2M x 8
  • Supply Voltage: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Interface: Parallel
  • Access Time: 90 ns
  • Erase/Program Suspend & Resume Support: Yes
  • Data Retention: 20 years

Detailed Pin Configuration

The AT49BV1614AT-90TI has a total of 48 pins. Here is a detailed pin configuration:

  1. A0-A19: Address Inputs
  2. DQ0-DQ7: Data Input/Output
  3. CE: Chip Enable
  4. OE: Output Enable
  5. WE: Write Enable
  6. RP: Reset/Power-down
  7. VCC: Power Supply
  8. GND: Ground

Functional Features

  • Erase and Program Operations: The AT49BV1614AT-90TI supports both erase and program operations, allowing for flexible data manipulation.
  • Suspend & Resume Support: This feature enables the suspension and resumption of erase or program operations, providing enhanced control over the memory operations.
  • Automatic Page Write: The device supports automatic page write, which simplifies the programming process by allowing multiple bytes to be programmed simultaneously.

Advantages and Disadvantages

Advantages

  • Non-volatile storage: Data is retained even without power, ensuring data integrity.
  • High capacity: The 16 megabit capacity allows for storing large amounts of data.
  • Fast access time: The device offers quick data retrieval, enhancing system performance.
  • Low power consumption: It operates on low power, making it suitable for battery-powered devices.

Disadvantages

  • Limited rewrite cycles: Flash memory has a limited number of erase/write cycles before degradation occurs.
  • Higher cost compared to other memory technologies: Flash memory tends to be more expensive than alternatives such as DRAM.

Working Principles

The AT49BV1614AT-90TI utilizes flash memory technology to store data. It consists of a grid of memory cells that can be electrically programmed and erased. When data is written, an electrical charge is applied to the memory cell, altering its state. To erase data, the charge is removed from the cell. The stored data can be accessed by sending appropriate address signals and reading the corresponding data from the memory cells.

Detailed Application Field Plans

The AT49BV1614AT-90TI finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices

Detailed and Complete Alternative Models

  1. AT49BV1614A-90TI: Similar to the AT49BV1614AT-90TI, but without the extended temperature range.
  2. AT49BV1614T-90TI: Offers the same specifications as the AT49BV1614AT-90TI but comes in a different package (TSOP II).

These alternative models provide similar functionality and can be considered as substitutes for the AT49BV1614AT-90TI.

In conclusion, the AT49BV1614AT-90TI is a non-volatile memory device with high capacity, fast access time, and low power consumption. It finds applications in various electronic systems and offers advantages such as data retention and quick access. However, it has limitations in terms of rewrite cycles and cost compared to other memory technologies.

技術ソリューションにおける AT49BV1614AT-90TI の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. Question: What is the maximum operating frequency of the AT49BV1614AT-90TI?
    Answer: The maximum operating frequency of the AT49BV1614AT-90TI is 90 MHz.

  2. Question: What is the storage capacity of the AT49BV1614AT-90TI?
    Answer: The AT49BV1614AT-90TI has a storage capacity of 16 megabits (2 megabytes).

  3. Question: What is the voltage supply range for the AT49BV1614AT-90TI?
    Answer: The voltage supply range for the AT49BV1614AT-90TI is 2.7V to 3.6V.

  4. Question: Does the AT49BV1614AT-90TI support asynchronous or synchronous operation?
    Answer: The AT49BV1614AT-90TI supports asynchronous operation.

  5. Question: What is the access time of the AT49BV1614AT-90TI?
    Answer: The access time of the AT49BV1614AT-90TI is 90 nanoseconds.

  6. Question: Can the AT49BV1614AT-90TI be used in automotive applications?
    Answer: Yes, the AT49BV1614AT-90TI is suitable for automotive applications.

  7. Question: Does the AT49BV1614AT-90TI have any built-in security features?
    Answer: No, the AT49BV1614AT-90TI does not have any built-in security features.

  8. Question: Is the AT49BV1614AT-90TI compatible with other memory devices?
    Answer: Yes, the AT49BV1614AT-90TI is compatible with other similar parallel flash memory devices.

  9. Question: What is the package type of the AT49BV1614AT-90TI?
    Answer: The AT49BV1614AT-90TI is available in a 48-pin TSOP (Thin Small Outline Package).

  10. Question: Can the AT49BV1614AT-90TI be used in industrial control systems?
    Answer: Yes, the AT49BV1614AT-90TI is suitable for use in industrial control systems.