AT49BV8192AT-11CI

Product Overview

Category

The AT49BV8192AT-11CI belongs to the category of non-volatile memory devices.

Use

It is primarily used for storing and retrieving data in electronic systems.

Characteristics

• Non-volatile: Retains data even when power is turned off.
• High capacity: The AT49BV8192AT-11CI has a storage capacity of 8192 kilobits (1 megabyte).
• Fast access time: It operates at a speed of 11 nanoseconds, allowing for quick data retrieval.
• Low power consumption: Designed to minimize power usage, making it suitable for battery-powered devices.

Package

The AT49BV8192AT-11CI is available in a compact 32-pin plastic package.

Essence

This memory device is essential for storing critical data in various electronic applications.

Packaging/Quantity

The AT49BV8192AT-11CI is typically packaged in reels or tubes, with each containing a specific quantity of devices. The exact packaging and quantity may vary depending on the manufacturer.

Specifications

• Storage Capacity: 8192 kilobits (1 megabyte)
• Access Time: 11 nanoseconds
• Supply Voltage: 2.7V - 3.6V
• Operating Temperature Range: -40°C to +85°C
• Interface: Parallel

Detailed Pin Configuration

The AT49BV8192AT-11CI features a 32-pin configuration. Here is a detailed pinout:

1. A0 - Address Input
2. A1 - Address Input
3. A2 - Address Input
4. A3 - Address Input
5. A4 - Address Input
6. A5 - Address Input
7. A6 - Address Input
8. A7 - Address Input
9. A8 - Address Input
10. A9 - Address Input
11. A10 - Address Input
12. A11 - Address Input
13. A12 - Address Input
14. A13 - Address Input
15. A14 - Address Input
16. A15 - Address Input
17. CE - Chip Enable Input
18. OE - Output Enable Input
19. WE - Write Enable Input
20. I/O0 - Data Input/Output
21. I/O1 - Data Input/Output
22. I/O2 - Data Input/Output
23. I/O3 - Data Input/Output
24. I/O4 - Data Input/Output
25. I/O5 - Data Input/Output
26. I/O6 - Data Input/Output
27. I/O7 - Data Input/Output
28. VCC - Power Supply
29. GND - Ground
30. NC - No Connection
31. RP - Ready/Busy Output
32. RESET - Reset Input

Functional Features

• High-speed data access: The AT49BV8192AT-11CI offers fast read and write operations, enabling efficient data transfer.
• Low power consumption: Designed to minimize power usage, making it suitable for battery-powered devices.
• Non-volatile storage: The data stored in the device remains intact even when power is turned off.
• Easy integration: The parallel interface allows for straightforward integration into various electronic systems.

Advantages and Disadvantages

Advantages

• High capacity storage
• Fast access time
• Low power consumption
• Non-volatile memory

Disadvantages

• Limited compatibility with certain interfaces
• Higher cost compared to some alternative models

Working Principles

The AT49BV8192AT-11CI utilizes flash memory technology to store and retrieve data. It employs a parallel interface for data transfer and operates based on the principles of electronic storage and retrieval.

Detailed Application Field Plans

The AT49BV8192AT-11CI finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices

Detailed and Complete Alternative Models

Some alternative models to the AT49BV8192AT-11CI include: - AT49BV8192A: Similar specifications and functionality, but with a different package. - AT49BV8192T: Offers the same capacity and speed, but with a different interface (Top Boot). - AT49BV8192W: Provides the same features, but with a wider operating temperature range.

These alternative models offer similar capabilities and can be considered as substitutes depending on specific requirements.

In conclusion, the AT49BV8192AT-11CI is a non-volatile memory device with high capacity, fast access time, and low power consumption. It is widely used in various electronic applications and offers several advantages such as non-volatility and easy integration. However, it may have limited compatibility with