AT49BV8192AT-11TI

Product Overview

Category

The AT49BV8192AT-11TI belongs to the category of non-volatile memory devices.

Use

This product is primarily used for storing and retrieving data in electronic systems.

Characteristics

• Non-volatile: The AT49BV8192AT-11TI retains stored data even when power is removed.
• High capacity: It has a storage capacity of 8192 kilobits (1 megabyte).
• Fast access time: The device offers a fast access time of 110 nanoseconds.
• Low power consumption: It operates on low power, making it suitable for battery-powered devices.

Package

The AT49BV8192AT-11TI is available in a standard TSOP (Thin Small Outline Package) form factor.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic systems.

Packaging/Quantity

The AT49BV8192AT-11TI is typically packaged in reels or tubes, with each package containing a specific quantity of devices. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

• Memory Type: Flash
• Organization: 8192 kilobits (1024 kilobytes)
• Access Time: 110 ns
• Supply Voltage: 2.7V - 3.6V
• Operating Temperature Range: -40°C to +85°C
• Interface: Parallel
• Package Type: TSOP

Detailed Pin Configuration

The AT49BV8192AT-11TI features a parallel interface with a total of 32 pins. The pin configuration is as follows:

1. A0 - Address Input
2. A1 - Address Input
3. A2 - Address Input
4. A3 - Address Input
5. A4 - Address Input
6. A5 - Address Input
7. A6 - Address Input
8. A7 - Address Input
9. A8 - Address Input
10. A9 - Address Input
11. A10 - Address Input
12. A11 - Address Input
13. A12 - Address Input
14. A13 - Address Input
15. A14 - Address Input
16. A15 - Address Input
17. A16 - Address Input
18. A17 - Address Input
19. A18 - Address Input
20. A19 - Address Input
21. A20 - Address Input
22. A21 - Address Input
23. A22 - Address Input
24. A23 - Address Input
25. BYTE# - Byte Selection Input
26. CE# - Chip Enable Input
27. OE# - Output Enable Input
28. WE# - Write Enable Input
29. RESET# - Reset Input
30. VCC - Power Supply
31. GND - Ground
32. NC - No Connection

Functional Features

• High-speed data transfer: The AT49BV8192AT-11TI offers fast read and write operations, enabling efficient data transfer.
• Sector erase capability: It supports sector-based erasure, allowing selective removal of data.
• Built-in protection mechanisms: The device incorporates various protection features to prevent accidental data corruption or loss.

Advantages and Disadvantages

Advantages

• Non-volatile memory ensures data retention even during power loss.
• High storage capacity for accommodating large amounts of data.
• Fast access time enables quick retrieval of information.
• Low power consumption prolongs battery life in portable devices.

Disadvantages

• Limited endurance: Flash memory has a finite number of erase/write cycles before degradation.
• Relatively higher cost compared to other types of memory.

Working Principles

The AT49BV8192AT-11TI utilizes flash memory technology to store data. It employs a combination of floating-gate transistors and charge storage mechanisms to retain information even when power is removed. The device uses an address bus, control signals, and data lines to facilitate read and write operations.

Detailed Application Field Plans

The AT49BV8192AT-11TI finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices

Detailed and Complete Alternative Models

1. AT49BV8192A-11TI: Similar to the AT49BV8192AT-11TI, but without the extended temperature range.
2. AT49BV8192AT-12TI: A variant with a slightly slower access time of 120 ns.
3. AT49BV8192AT-10TI: Another variant with a faster access time of 100 ns.

These alternative models offer similar functionality and compatibility with different system requirements.

In conclusion, the AT49BV8192AT-11TI is a non