AT49F001ANT-55JU belongs to the category of non-volatile memory devices.
This product is primarily used for storing and retrieving digital information in electronic systems.
The AT49F001ANT-55JU is available in a 32-pin PLCC (Plastic Leaded Chip Carrier) package.
The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic systems.
The AT49F001ANT-55JU is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.
The AT49F001ANT-55JU has a total of 32 pins. Here is the detailed pin configuration:
The AT49F001ANT-55JU utilizes flash EEPROM technology to store and retrieve digital information. It consists of a grid of memory cells, where each cell can store one bit of data. The data is stored by trapping electric charges within the floating gate of each memory cell. These trapped charges determine the state of each bit, allowing for data retrieval even when power is removed.
The AT49F001ANT-55JU finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices
These alternative models provide similar functionality and can be considered as substitutes for the AT49F001ANT-55JU.
Word count: 527 words
Sure! Here are 10 common questions and answers related to the application of AT49F001ANT-55JU in technical solutions:
1. What is the AT49F001ANT-55JU? The AT49F001ANT-55JU is a 1-megabit (128K x 8) CMOS flash memory device.
2. What are the key features of the AT49F001ANT-55JU? Some key features include a fast read access time, low power consumption, sector erase architecture, and compatibility with various microcontrollers.
3. What is the maximum operating frequency of the AT49F001ANT-55JU? The maximum operating frequency is 55 MHz.
4. Can the AT49F001ANT-55JU be used as a boot device? Yes, it can be used as a boot device due to its compatibility with various microcontrollers.
5. What is the voltage range for the AT49F001ANT-55JU? The voltage range is typically between 4.5V and 5.5V.
6. How many sectors does the AT49F001ANT-55JU have? The AT49F001ANT-55JU has 16 sectors.
7. What is the typical programming time for the AT49F001ANT-55JU? The typical programming time is around 10 microseconds per byte.
8. Can the AT49F001ANT-55JU be reprogrammed multiple times? Yes, the AT49F001ANT-55JU supports multiple reprogramming cycles.
9. Is the AT49F001ANT-55JU compatible with standard TTL inputs/outputs? Yes, it is compatible with standard TTL inputs/outputs.
10. What is the temperature range for the AT49F001ANT-55JU? The temperature range is typically between -40°C and +85°C.
Please note that these answers are based on general information about the AT49F001ANT-55JU. For specific technical details, it is recommended to refer to the datasheet or consult the manufacturer's documentation.