画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AT49F001T-70JC

AT49F001T-70JC

Product Overview

Category

AT49F001T-70JC belongs to the category of non-volatile memory devices.

Use

It is primarily used for storing and retrieving digital information in electronic systems.

Characteristics

  • Non-volatile: Retains data even when power is turned off.
  • High storage capacity: Can store up to 1 megabit (128 kilobytes) of data.
  • Fast access time: Operates at a speed of 70 nanoseconds.
  • Low power consumption: Designed to minimize energy usage.
  • Reliable: Offers high endurance and data retention capabilities.

Package

AT49F001T-70JC is available in a 32-pin PLCC (Plastic Leaded Chip Carrier) package.

Essence

The essence of AT49F001T-70JC lies in its ability to provide reliable and non-volatile storage for electronic systems.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each containing a specific quantity of AT49F001T-70JC chips.

Specifications

  • Memory Type: Flash EEPROM
  • Memory Size: 1 Megabit (128 Kilobytes)
  • Access Time: 70 Nanoseconds
  • Supply Voltage: 5V
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: 32-pin PLCC

Detailed Pin Configuration

  1. A16
  2. A15
  3. A12
  4. A7
  5. A6
  6. A5
  7. A4
  8. A3
  9. A2
  10. A1
  11. A0
  12. VPP
  13. WE#
  14. OE#
  15. CE#
  16. BYTE#
  17. NC
  18. DQ0
  19. DQ1
  20. DQ2
  21. DQ3
  22. DQ4
  23. DQ5
  24. DQ6
  25. DQ7
  26. VCC
  27. GND
  28. NC
  29. NC
  30. NC
  31. NC
  32. NC

Functional Features

  • Byte-wide and word-wide operations for flexible data access.
  • Sector erase capability for efficient memory management.
  • Hardware and software protection mechanisms to prevent unauthorized access.
  • Automatic sleep mode to conserve power when not in use.
  • High-speed programming and erasing operations.

Advantages and Disadvantages

Advantages

  • Non-volatile nature ensures data retention even during power loss.
  • High storage capacity suitable for various applications.
  • Fast access time allows for quick data retrieval.
  • Low power consumption prolongs battery life in portable devices.
  • Reliable performance with high endurance and data retention capabilities.

Disadvantages

  • Limited write/erase cycles compared to other types of memory.
  • Relatively higher cost per bit compared to traditional RAM.

Working Principles

AT49F001T-70JC utilizes flash EEPROM technology, which combines the benefits of both electrically erasable programmable read-only memory (EEPROM) and flash memory. It stores data by trapping electrons in a floating gate, which can be electrically programmed or erased. The stored charge determines the logic state of each memory cell, allowing for non-volatile data storage.

Detailed Application Field Plans

AT49F001T-70JC finds application in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to AT49F001T-70JC include: - AT49F002NT-70JC - AT49F010-70JC - AT49F040-70JC - AM29F010B-70JC - AM29F002B-70JC

These models provide comparable features and can be considered as alternatives based on specific requirements.

Word count: 413 words

技術ソリューションにおける AT49F001T-70JC の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AT49F001T-70JC in technical solutions:

  1. Q: What is the AT49F001T-70JC? A: The AT49F001T-70JC is a 1-megabit (128K x 8) flash memory chip manufactured by Atmel.

  2. Q: What is the operating voltage range for the AT49F001T-70JC? A: The AT49F001T-70JC operates within a voltage range of 4.5V to 5.5V.

  3. Q: What is the maximum clock frequency supported by the AT49F001T-70JC? A: The AT49F001T-70JC supports a maximum clock frequency of 70 MHz.

  4. Q: Can the AT49F001T-70JC be used as a boot device in embedded systems? A: Yes, the AT49F001T-70JC can be used as a boot device due to its fast access time and high reliability.

  5. Q: Does the AT49F001T-70JC support in-system programming (ISP)? A: No, the AT49F001T-70JC does not support in-system programming. It requires a separate programmer for programming.

  6. Q: What is the endurance rating of the AT49F001T-70JC? A: The AT49F001T-70JC has an endurance rating of 100,000 program/erase cycles.

  7. Q: Can the AT49F001T-70JC operate in harsh environments? A: Yes, the AT49F001T-70JC is designed to operate in industrial temperature ranges (-40°C to +85°C) and is suitable for harsh environments.

  8. Q: What interface does the AT49F001T-70JC use for communication? A: The AT49F001T-70JC uses a standard 8-bit parallel interface for communication with the microcontroller or other devices.

  9. Q: Is the AT49F001T-70JC compatible with other flash memory chips? A: Yes, the AT49F001T-70JC is compatible with other flash memory chips that have similar specifications and interface requirements.

  10. Q: Can the AT49F001T-70JC be used in battery-powered applications? A: Yes, the AT49F001T-70JC has low power consumption and can be used in battery-powered applications where energy efficiency is crucial.

Please note that these answers are based on general knowledge and may vary depending on specific application requirements.