画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AT49F001T-90PC

AT49F001T-90PC

Product Overview

Category

AT49F001T-90PC belongs to the category of non-volatile memory devices.

Use

It is primarily used for storing and retrieving digital information in electronic systems.

Characteristics

  • Non-volatile: The stored data is retained even when power is removed.
  • High capacity: The AT49F001T-90PC has a storage capacity of 1 megabit (128 kilobytes).
  • Fast access time: It operates at a maximum access time of 90 nanoseconds.
  • Low power consumption: It requires minimal power to operate efficiently.

Package

The AT49F001T-90PC is available in a plastic package, which provides protection and facilitates easy integration into electronic circuits.

Essence

The essence of AT49F001T-90PC lies in its ability to provide reliable and non-volatile storage for digital data in various electronic applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each containing a specific quantity of AT49F001T-90PC chips. The exact quantity may vary depending on the manufacturer's specifications.

Specifications

  • Storage Capacity: 1 Megabit (128 Kilobytes)
  • Access Time: 90 Nanoseconds
  • Supply Voltage: 5 Volts
  • Operating Temperature Range: -40°C to +85°C
  • Erase/Write Cycle Endurance: 10,000 cycles

Detailed Pin Configuration

The AT49F001T-90PC has a total of 32 pins, each serving a specific function. The pin configuration is as follows:

  1. A0 - Address Input
  2. A1 - Address Input
  3. A2 - Address Input
  4. A3 - Address Input
  5. A4 - Address Input
  6. A5 - Address Input
  7. A6 - Address Input
  8. A7 - Address Input
  9. A8 - Address Input
  10. A9 - Address Input
  11. A10 - Address Input
  12. A11 - Address Input
  13. A12 - Address Input
  14. A13 - Address Input
  15. A14 - Address Input
  16. A15 - Address Input
  17. OE# - Output Enable
  18. CE# - Chip Enable
  19. WE# - Write Enable
  20. VCC - Supply Voltage
  21. DQ0 - Data Input/Output
  22. DQ1 - Data Input/Output
  23. DQ2 - Data Input/Output
  24. DQ3 - Data Input/Output
  25. DQ4 - Data Input/Output
  26. DQ5 - Data Input/Output
  27. DQ6 - Data Input/Output
  28. DQ7 - Data Input/Output
  29. RESET# - Reset Input
  30. RP# - Ready/Busy Output
  31. NC - No Connection
  32. GND - Ground

Functional Features

  • Easy integration: The AT49F001T-90PC can be easily integrated into various electronic systems due to its standard pin configuration.
  • High-speed operation: It offers fast access times, allowing for efficient data retrieval and storage.
  • Non-volatile memory: The stored data remains intact even when power is removed, ensuring reliable data retention.
  • Low power consumption: It operates with minimal power requirements, making it suitable for battery-powered devices.

Advantages and Disadvantages

Advantages

  • Non-volatile storage ensures data retention in the absence of power.
  • Fast access time allows for quick data retrieval.
  • Easy integration into electronic systems due to standard pin configuration.
  • Low power consumption makes it suitable for portable devices.

Disadvantages

  • Limited storage capacity compared to other memory devices.
  • Erase/write cycle endurance may be a limitation in certain applications.

Working Principles

The AT49F001T-90PC utilizes flash memory technology for data storage. It consists of a grid of memory cells, where each cell can store a bit of information. These cells are organized into pages and blocks, allowing for efficient read and write operations. The data is stored by trapping electric charges within the memory cells, which can be accessed and modified as needed.

Detailed Application Field Plans

The AT49F001T-90PC finds application in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices

Its non-volatile nature and fast access times make it suitable for applications that require reliable and quick data storage, such as firmware storage, program code storage, and data logging.

Detailed and Complete Alternative Models

Some alternative models to AT49F001T-90PC include: - AT49F002T-90PC: 2 Megabit (256 Kiloby

技術ソリューションにおける AT49F001T-90PC の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AT49F001T-90PC in technical solutions:

  1. Q: What is the AT49F001T-90PC? A: The AT49F001T-90PC is a 1-megabit (128K x 8) CMOS flash memory device manufactured by Atmel.

  2. Q: What are the key features of the AT49F001T-90PC? A: The key features include a 90ns access time, low power consumption, byte-wide data organization, and compatibility with various microcontrollers.

  3. Q: How can I interface the AT49F001T-90PC with a microcontroller? A: The AT49F001T-90PC uses a standard parallel interface, making it compatible with most microcontrollers. You can connect it using address, data, and control lines.

  4. Q: What voltage levels does the AT49F001T-90PC support? A: The AT49F001T-90PC supports a single power supply voltage range of 4.5V to 5.5V.

  5. Q: Can I use the AT49F001T-90PC in battery-powered applications? A: Yes, the AT49F001T-90PC has low power consumption, making it suitable for battery-powered applications where power efficiency is crucial.

  6. Q: How much data can the AT49F001T-90PC store? A: The AT49F001T-90PC has a capacity of 1 megabit, which translates to 128 kilobytes of data storage.

  7. Q: Is the AT49F001T-90PC erasable and programmable? A: Yes, the AT49F001T-90PC supports both erasing and programming operations, allowing you to modify its contents as needed.

  8. Q: What is the endurance of the AT49F001T-90PC? A: The AT49F001T-90PC has a typical endurance of 10,000 erase/write cycles, ensuring reliable operation over an extended period.

  9. Q: Can I use the AT49F001T-90PC in industrial temperature environments? A: Yes, the AT49F001T-90PC is designed to operate reliably in a wide temperature range, including industrial temperature environments.

  10. Q: Are there any application examples for the AT49F001T-90PC? A: Yes, the AT49F001T-90PC can be used in various applications such as embedded systems, automotive electronics, consumer electronics, and industrial control systems.

Please note that these answers are general and may vary depending on specific requirements and use cases.