AT49F002N-12JI belongs to the category of non-volatile memory devices.
This product is primarily used for storing and retrieving digital information in electronic systems.
The AT49F002N-12JI is available in a 32-pin PLCC (Plastic Leaded Chip Carrier) package.
The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic systems.
The AT49F002N-12JI is typically packaged in reels or tubes, with a quantity of 50 units per reel/tube.
The AT49F002N-12JI utilizes Flash memory technology to store and retrieve digital information. It employs a combination of floating-gate transistors and charge storage mechanisms to achieve non-volatile storage. When data is written, charges are trapped in the floating gate, altering the transistor's behavior and preserving the stored information. During read operations, the charges are sensed to determine the stored data.
The AT49F002N-12JI finds applications in various electronic systems, including but not limited to: - Embedded systems - Consumer electronics - Automotive electronics - Industrial control systems - Communication devices
These alternative models offer similar functionality and characteristics to the AT49F002N-12JI, providing options for different package types or temperature ranges.
In conclusion, the AT49F002N-12JI is a non-volatile memory device with high capacity, fast access time, and low power consumption. It offers reliable storage for digital information in various electronic systems. While it has limitations in terms of erase/write cycles and cost per bit, its advantages include non-volatility, high endurance, and data retention capabilities. The product's working principle involves Flash memory technology
Sure! Here are 10 common questions and answers related to the application of AT49F002N-12JI in technical solutions:
Q: What is the AT49F002N-12JI? A: The AT49F002N-12JI is a 2-megabit (256K x 8) CMOS flash memory device manufactured by Atmel.
Q: What are the key features of the AT49F002N-12JI? A: Some key features include a 12ns access time, low power consumption, sector erase capability, and compatibility with various microcontrollers.
Q: How can I interface the AT49F002N-12JI with a microcontroller? A: The AT49F002N-12JI uses a standard parallel interface, making it compatible with most microcontrollers. You can connect it using address, data, and control lines.
Q: What voltage levels does the AT49F002N-12JI support? A: The AT49F002N-12JI supports a single power supply voltage range of 4.5V to 5.5V.
Q: Can I use the AT49F002N-12JI in battery-powered devices? A: Yes, the AT49F002N-12JI has low power consumption, making it suitable for battery-powered applications.
Q: How do I erase and program the AT49F002N-12JI? A: The AT49F002N-12JI supports both sector erase and byte programming operations. You can use specific commands and timing sequences to perform these operations.
Q: What is the maximum number of erase/write cycles supported by the AT49F002N-12JI? A: The AT49F002N-12JI supports a minimum of 10,000 erase/write cycles per sector.
Q: Can I use the AT49F002N-12JI as a boot device? A: Yes, the AT49F002N-12JI can be used as a boot device in many systems due to its fast access time and compatibility with microcontrollers.
Q: Are there any specific precautions I need to take while handling the AT49F002N-12JI? A: It is recommended to follow proper ESD (Electrostatic Discharge) precautions while handling the AT49F002N-12JI to prevent damage to the device.
Q: Where can I find more detailed information about the AT49F002N-12JI? A: You can refer to the datasheet provided by Atmel for detailed technical specifications, electrical characteristics, and application notes related to the AT49F002N-12JI.
Please note that the answers provided here are general and may vary depending on the specific requirements and implementation of the AT49F002N-12JI in different technical solutions.