Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AT49F040A-55JU
詳細を表示 DataSheets

AT49F040A-55JU

Product Overview

Category

AT49F040A-55JU belongs to the category of non-volatile memory devices.

Use

This product is commonly used for storing and retrieving data in various electronic devices, such as computers, mobile phones, and consumer electronics.

Characteristics

  • Non-volatile: The AT49F040A-55JU retains stored data even when power is turned off.
  • High capacity: This device has a storage capacity of 4 megabits (512 kilobytes).
  • Fast access time: With a maximum access time of 55 nanoseconds, it ensures quick data retrieval.
  • Low power consumption: The AT49F040A-55JU operates on low power, making it suitable for battery-powered devices.

Package

The AT49F040A-55JU comes in a standard 32-pin PLCC (Plastic Leaded Chip Carrier) package.

Essence

The essence of this product lies in its ability to provide reliable and non-volatile storage for electronic devices, ensuring data integrity and fast access.

Packaging/Quantity

The AT49F040A-55JU is typically packaged in reels or tubes, with a quantity of 1000 units per reel/tube.

Specifications

  • Memory Type: Flash EEPROM
  • Capacity: 4 Megabits (512 Kilobytes)
  • Access Time: 55 Nanoseconds
  • Supply Voltage: 5V
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: 32-pin PLCC

Detailed Pin Configuration

  1. A16
  2. A14
  3. A12
  4. A7
  5. A6
  6. A5
  7. A4
  8. A3
  9. A2
  10. A1
  11. A0
  12. VPP
  13. WE#
  14. OE#
  15. CE#
  16. BYTE#
  17. NC
  18. DQ0
  19. DQ1
  20. DQ2
  21. DQ3
  22. DQ4
  23. DQ5
  24. DQ6
  25. DQ7
  26. VCC
  27. GND
  28. RP#
  29. RY/BY#
  30. RESET#
  31. NC
  32. NC

Functional Features

  • Erase and Program Operations: The AT49F040A-55JU supports both sector erase and byte program operations, allowing flexible data manipulation.
  • Hardware Data Protection: This device features a hardware protection mechanism to prevent accidental erasure or programming of data.
  • Automatic Sleep Mode: When not in use, the AT49F040A-55JU enters a low-power sleep mode, conserving energy.

Advantages and Disadvantages

Advantages

  • Non-volatile memory ensures data retention even during power loss.
  • High storage capacity for various applications.
  • Fast access time enables quick data retrieval.
  • Low power consumption extends battery life in portable devices.

Disadvantages

  • Limited write endurance compared to other types of memory.
  • Relatively higher cost per bit compared to volatile memory.

Working Principles

The AT49F040A-55JU utilizes flash EEPROM technology to store data. It consists of a grid of memory cells that can be electrically programmed and erased. The stored data is retained even when power is turned off, making it non-volatile. The device operates by applying specific voltage levels to control pins for read, write, and erase operations.

Detailed Application Field Plans

The AT49F040A-55JU finds application in various electronic systems, including: - Personal computers - Mobile phones - Set-top boxes - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  1. AT49F040A-55TU: Similar to AT49F040A-55JU, but in a 32-pin TSOP (Thin Small Outline Package) package.
  2. AT49F040A-55TI: Similar to AT49F040A-55JU, but in a 32-pin TQFP (Thin Quad Flat Package) package.
  3. AT49F040A-55PI: Similar to AT49F040A-55JU, but in a 32-pin PDIP (Plastic Dual In-line Package) package.

These alternative models offer the same functionality and specifications as the AT49F040A-55JU, providing flexibility in choosing the appropriate package for different system requirements.

In conclusion, the AT49F040A-55JU is a non-volatile memory device with a capacity of 4 megabits. It offers fast access time, low power consumption, and reliable data storage. While it has limitations in write

技術ソリューションにおける AT49F040A-55JU の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AT49F040A-55JU in technical solutions:

  1. Q: What is the AT49F040A-55JU? A: The AT49F040A-55JU is a 4-megabit (512K x 8) CMOS flash memory chip manufactured by Atmel.

  2. Q: What are the key features of the AT49F040A-55JU? A: Some key features include a 5V power supply, fast read and write operations, low power consumption, and compatibility with various microcontrollers.

  3. Q: How can I interface the AT49F040A-55JU with a microcontroller? A: The AT49F040A-55JU uses a standard parallel interface, making it compatible with most microcontrollers. You can connect it using address, data, and control lines.

  4. Q: What is the maximum operating frequency of the AT49F040A-55JU? A: The AT49F040A-55JU can operate at a maximum frequency of 55 MHz.

  5. Q: Can I use the AT49F040A-55JU for code storage in my embedded system? A: Yes, the AT49F040A-55JU is commonly used for code storage in various embedded systems due to its high capacity and fast access times.

  6. Q: Does the AT49F040A-55JU support in-system programming (ISP)? A: No, the AT49F040A-55JU does not support in-system programming. It requires a separate programmer device for programming.

  7. Q: What is the typical endurance of the AT49F040A-55JU? A: The AT49F040A-55JU has a typical endurance of 10,000 write/erase cycles.

  8. Q: Can I use the AT49F040A-55JU in automotive applications? A: Yes, the AT49F040A-55JU is suitable for automotive applications as it meets the necessary temperature and reliability requirements.

  9. Q: What is the operating temperature range of the AT49F040A-55JU? A: The AT49F040A-55JU can operate within a temperature range of -40°C to +85°C.

  10. Q: Are there any specific precautions I need to take while handling the AT49F040A-55JU? A: It is recommended to follow standard ESD (Electrostatic Discharge) precautions while handling the AT49F040A-55JU to prevent any damage to the chip.

Please note that these answers are general and may vary depending on the specific application and requirements.