Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
AT93C56-10PI-2.7
詳細を表示 DataSheets

AT93C56-10PI-2.7

Product Overview

Category

AT93C56-10PI-2.7 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.

Use

This product is commonly used for non-volatile storage in various electronic devices, such as microcontrollers, computers, and consumer electronics.

Characteristics

  • Non-volatile: The data stored in AT93C56-10PI-2.7 is retained even when power is removed.
  • Electrically erasable: The memory can be erased and reprogrammed electronically.
  • Small form factor: The chip is compact and suitable for integration into space-constrained devices.
  • Low power consumption: AT93C56-10PI-2.7 operates efficiently with minimal power requirements.

Package

AT93C56-10PI-2.7 is available in a DIP (Dual In-line Package) format, which consists of two parallel rows of pins.

Essence

The essence of AT93C56-10PI-2.7 lies in its ability to store and retrieve digital information reliably, making it an essential component in many electronic systems.

Packaging/Quantity

This product is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of AT93C56-10PI-2.7 chips.

Specifications

  • Memory Size: 2 kilobits (256 x 8 bits)
  • Operating Voltage: 2.7V to 5.5V
  • Operating Temperature Range: -40°C to +85°C
  • Write Time: 5ms (maximum)
  • Data Retention: 100 years (minimum)

Detailed Pin Configuration

The AT93C56-10PI-2.7 chip has a total of 8 pins, each serving a specific function. The pin configuration is as follows:

  1. Chip Select (/CS)
  2. Serial Data Input (DI)
  3. Serial Data Output (DO)
  4. Serial Clock (SK)
  5. Write Enable (/W)
  6. VCC (Power Supply)
  7. Ground (GND)
  8. Not Connected (NC)

Functional Features

  • High-speed data transfer: AT93C56-10PI-2.7 supports fast serial communication, enabling efficient data transfer.
  • Hardware write protection: The chip includes write protection mechanisms to prevent accidental modification of stored data.
  • Sequential read operation: It allows sequential reading of multiple memory locations, reducing access time.

Advantages and Disadvantages

Advantages

  • Compact size enables integration into various electronic devices.
  • Low power consumption prolongs battery life in portable applications.
  • Reliable non-volatile storage ensures data integrity.
  • Fast data transfer speeds enhance overall system performance.

Disadvantages

  • Limited storage capacity compared to other memory technologies.
  • Relatively slower write times may impact certain real-time applications.

Working Principles

AT93C56-10PI-2.7 utilizes an electrically erasable technology that allows individual memory cells to be programmed or erased electronically. The chip employs a combination of transistors and capacitors to store and retrieve digital information.

Detailed Application Field Plans

AT93C56-10PI-2.7 finds application in various fields, including but not limited to: - Automotive electronics - Industrial control systems - Consumer electronics - Medical devices - Communication equipment

Detailed and Complete Alternative Models

Some alternative models to AT93C56-10PI-2.7 include: - AT93C66-10PI-2.7 - AT93C46-10PI-2.7 - AT93C86-10PI-2.7

These models offer similar functionality and characteristics, providing options for different memory size requirements.

In conclusion, AT93C56-10PI-2.7 is a compact and reliable EEPROM chip widely used in various electronic devices. Its non-volatile storage capability, low power consumption, and fast data transfer make it suitable for diverse applications. While it has limitations in terms of storage capacity and write times, alternative models are available to cater to specific needs.

技術ソリューションにおける AT93C56-10PI-2.7 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of AT93C56-10PI-2.7 in technical solutions:

  1. Q: What is AT93C56-10PI-2.7? A: AT93C56-10PI-2.7 is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by Microchip Technology. It has a capacity of 2 kilobits (256 x 8 bits) and operates at a voltage of 2.7V.

  2. Q: What are the typical applications of AT93C56-10PI-2.7? A: AT93C56-10PI-2.7 is commonly used in various electronic devices, such as automotive systems, industrial control systems, consumer electronics, and communication equipment. It is often used for storing configuration data, calibration values, or other small amounts of non-volatile memory.

  3. Q: How does AT93C56-10PI-2.7 communicate with a microcontroller? A: AT93C56-10PI-2.7 uses a simple 3-wire serial interface (SI, SO, and SCK) to communicate with a microcontroller. The microcontroller sends commands and addresses to read from or write to the EEPROM, and the data is transferred serially using these lines.

  4. Q: What is the maximum operating frequency of AT93C56-10PI-2.7? A: The maximum operating frequency of AT93C56-10PI-2.7 is typically 5 MHz. However, it can also operate at lower frequencies depending on the system requirements.

  5. Q: Can AT93C56-10PI-2.7 be reprogrammed multiple times? A: Yes, AT93C56-10PI-2.7 is an electrically erasable memory, which means it can be reprogrammed multiple times. It supports a minimum of 1 million erase/write cycles.

  6. Q: What is the write endurance of AT93C56-10PI-2.7? A: The write endurance of AT93C56-10PI-2.7 is typically 1 million cycles. This means you can erase and write data to the EEPROM up to 1 million times before it may start to degrade.

  7. Q: Does AT93C56-10PI-2.7 require any external components for operation? A: Yes, AT93C56-10PI-2.7 requires a power supply (2.7V), decoupling capacitors, and pull-up resistors on the serial interface lines (SI, SO, and SCK). These external components are necessary for proper operation.

  8. Q: Can AT93C56-10PI-2.7 operate at voltages other than 2.7V? A: No, AT93C56-10PI-2.7 is specifically designed to operate at a voltage of 2.7V. Operating it at higher or lower voltages may result in improper functionality or damage to the chip.

  9. Q: Is AT93C56-10PI-2.7 compatible with standard microcontroller interfaces? A: Yes, AT93C56-10PI-2.7 is compatible with commonly used microcontroller interfaces such as SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Circuit). However, it uses its own proprietary 3-wire serial interface.

  10. Q: Can AT93C56-10PI-2.7 retain data during power loss? A: Yes, AT93C56-10PI-2.7 is a non-volatile memory, which means it can retain data even when the power is disconnected. This makes it suitable for storing important configuration or calibration data in various applications.

Please note that the answers provided here are general and may vary depending on specific application requirements and datasheet specifications.