AT93C66A-10PI-1.8
Overview
Product Category
AT93C66A-10PI-1.8 belongs to the category of electrically erasable programmable read-only memory (EEPROM) chips.
Use
The AT93C66A-10PI-1.8 chip is primarily used for non-volatile storage of data in various electronic devices and systems.
Characteristics
- Non-volatile: The stored data remains even when power is removed.
- Electrically erasable: Data can be erased and reprogrammed electronically.
- Small form factor: Compact size allows for integration into space-constrained designs.
- Low power consumption: Operates efficiently with minimal power requirements.
Package and Quantity
The AT93C66A-10PI-1.8 chip is available in a 8-pin DIP (Dual Inline Package) configuration. It is typically sold in reels or tubes containing multiple units.
Specifications
- Operating Voltage: 1.8V
- Memory Size: 4K bits
- Organization: 512 x 8 bits
- Maximum Clock Frequency: 10 MHz
- Write Time: 5 ms (typical)
- Data Retention: 100 years (minimum)
Pin Configuration
``` ┌───┬───┐ │ 1 │ 8 │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │
技術ソリューションにおける AT93C66A-10PI-1.8 の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of AT93C66A-10PI-1.8 in technical solutions:
Q1: What is AT93C66A-10PI-1.8? A1: AT93C66A-10PI-1.8 is a specific model of EEPROM (Electrically Erasable Programmable Read-Only Memory) chip manufactured by Microchip Technology. It has a capacity of 4K bits.
Q2: What are the typical applications of AT93C66A-10PI-1.8? A2: AT93C66A-10PI-1.8 is commonly used in various electronic devices, such as automotive systems, industrial control systems, consumer electronics, and communication equipment.
Q3: How does AT93C66A-10PI-1.8 store data? A3: AT93C66A-10PI-1.8 stores data using electrically isolated memory cells that can be programmed or erased electronically.
Q4: What is the operating voltage range for AT93C66A-10PI-1.8? A4: The operating voltage range for AT93C66A-10PI-1.8 is typically between 1.8V and 5.5V.
Q5: Can AT93C66A-10PI-1.8 be reprogrammed multiple times? A5: Yes, AT93C66A-10PI-1.8 is an EEPROM chip that can be reprogrammed multiple times, allowing for flexibility in storing and updating data.
Q6: What is the maximum clock frequency supported by AT93C66A-10PI-1.8? A6: The maximum clock frequency supported by AT93C66A-10PI-1.8 is 5 MHz.
Q7: Does AT93C66A-10PI-1.8 have any security features? A7: No, AT93C66A-10PI-1.8 does not have built-in security features. It is a standard EEPROM chip without encryption or protection mechanisms.
Q8: Can AT93C66A-10PI-1.8 operate in harsh environments? A8: Yes, AT93C66A-10PI-1.8 is designed to operate in a wide temperature range (-40°C to +85°C) and can withstand harsh environmental conditions.
Q9: What is the package type of AT93C66A-10PI-1.8? A9: AT93C66A-10PI-1.8 comes in an 8-pin DIP (Dual Inline Package) format, which is a common package type for integrated circuits.
Q10: Are there any specific programming requirements for AT93C66A-10PI-1.8? A10: AT93C66A-10PI-1.8 requires a dedicated programmer or microcontroller with SPI (Serial Peripheral Interface) capability to write or read data from the chip.
Please note that these answers are general and may vary depending on the specific application and requirements.