Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ATMEGA64A-MN
詳細を表示 DataSheets

ATMEGA64A-MN

Introduction

The ATMEGA64A-MN is a microcontroller belonging to the ATmega series produced by Microchip Technology. This entry provides an overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, industrial control, consumer electronics
  • Characteristics: High performance, low power consumption, versatile I/O capabilities
  • Package: 64-pin QFN (Quad Flat No-leads)
  • Essence: Combines high computational performance with low power consumption
  • Packaging/Quantity: Tape & Reel, 250 units per reel

Specifications

  • Architecture: 8-bit AVR
  • Flash Memory: 64 KB
  • SRAM: 4 KB
  • EEPROM: 2 KB
  • Operating Voltage: 1.8V - 5.5V
  • Max CPU Speed: 20 MHz
  • I/O Pins: 53
  • Communication Interfaces: UART, SPI, I2C
  • Analog Input Channels: 8
  • Timers/Counters: 3

Detailed Pin Configuration

The ATMEGA64A-MN features a total of 64 pins, each serving specific functions related to input/output, communication, power supply, and other functionalities. The detailed pin configuration can be found in the official datasheet provided by Microchip Technology.

Functional Features

  • High Performance: The microcontroller operates at a maximum speed of 20 MHz, enabling rapid execution of tasks.
  • Low Power Consumption: Designed for energy efficiency, making it suitable for battery-powered applications.
  • Versatile I/O Capabilities: With 53 I/O pins, the ATMEGA64A-MN offers flexibility in interfacing with external devices and peripherals.

Advantages and Disadvantages

Advantages

  • Efficient power management
  • Extensive I/O capabilities
  • Wide operating voltage range

Disadvantages

  • Limited flash memory compared to some contemporary microcontrollers
  • Relatively lower clock speed compared to higher-end microcontrollers

Working Principles

The ATMEGA64A-MN operates based on the 8-bit AVR architecture, utilizing a combination of flash memory, SRAM, and EEPROM to store program instructions, data, and non-volatile settings. It interfaces with external components through its I/O pins and communication interfaces, executing programmed tasks based on input signals and internal logic.

Detailed Application Field Plans

The ATMEGA64A-MN finds applications in various fields, including: - Industrial automation - Home automation - Automotive electronics - Consumer electronics - Internet of Things (IoT) devices

Detailed and Complete Alternative Models

  • ATMEGA128A: Offers higher flash memory capacity
  • ATMEGA32A: Suitable for cost-sensitive applications with lower memory requirements
  • ATMEGA2560: Provides expanded I/O capabilities and memory for more complex applications

In conclusion, the ATMEGA64A-MN is a versatile microcontroller offering a balance of performance, power efficiency, and I/O capabilities, making it suitable for a wide range of embedded system applications.

Word Count: 497

技術ソリューションにおける ATMEGA64A-MN の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the ATMEGA64A-MN microcontroller used for?

    • The ATMEGA64A-MN microcontroller is commonly used in embedded systems and technical solutions where a high-performance 8-bit microcontroller is required.

  2. What are the key features of the ATMEGA64A-MN?

    • The ATMEGA64A-MN features 64KB of flash memory, 4KB of SRAM, 2KB of EEPROM, 32 general-purpose I/O lines, and a wide range of communication interfaces such as SPI, I2C, and USART.

  3. How can I program the ATMEGA64A-MN microcontroller?

    • The ATMEGA64A-MN can be programmed using various development tools such as Atmel Studio, AVR-GCC, or Arduino IDE with the appropriate hardware programmer.

  4. What are some common applications of the ATMEGA64A-MN?

    • The ATMEGA64A-MN is commonly used in industrial control systems, consumer electronics, automotive applications, and various IoT devices.

  5. What voltage levels does the ATMEGA64A-MN support?

    • The ATMEGA64A-MN operates at a voltage range of 2.7V to 5.5V, making it suitable for a wide variety of applications.

  6. Can the ATMEGA64A-MN interface with external sensors and peripherals?

    • Yes, the ATMEGA64A-MN has multiple GPIO pins and communication interfaces that allow it to interface with a wide range of sensors, actuators, and other peripherals.

  7. Does the ATMEGA64A-MN have built-in analog-to-digital converters (ADC)?

    • Yes, the ATMEGA64A-MN features an 8-channel 10-bit ADC, which is useful for interfacing with analog sensors and signals.

  8. What kind of communication protocols does the ATMEGA64A-MN support?

    • The ATMEGA64A-MN supports popular communication protocols such as SPI, I2C, and USART, making it versatile for connecting to other devices and modules.

  9. Is the ATMEGA64A-MN suitable for low-power applications?

    • Yes, the ATMEGA64A-MN offers various power-saving modes and features, making it suitable for battery-powered or energy-efficient applications.

  10. Where can I find detailed technical documentation for the ATMEGA64A-MN?

    • Detailed technical documentation, including datasheets and application notes, can be found on the official Microchip website or through authorized distributors.