Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ATMEGA88V-10AU
詳細を表示 DataSheets

ATMEGA88V-10AU

Introduction

The ATMEGA88V-10AU is a microcontroller belonging to the ATmega series produced by Microchip Technology. This versatile microcontroller is widely used in various electronic applications due to its advanced features and capabilities.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, industrial control, consumer electronics
  • Characteristics: Low power consumption, high performance, versatile I/O capabilities
  • Package: TQFP (Thin Quad Flat Package)
  • Essence: The ATMEGA88V-10AU is designed to provide a cost-effective and efficient solution for embedded system development.
  • Packaging/Quantity: Available in tape and reel packaging with varying quantities.

Specifications

The ATMEGA88V-10AU features the following specifications: - Operating Voltage: 2.7V - 5.5V - CPU Speed: 10 MHz - Flash Memory: 8 KB - SRAM: 1 KB - EEPROM: 512 Bytes - I/O Pins: 23 - Communication Interfaces: UART, SPI, I2C - Analog Input Channels: 8 - Timers: 3 (8-bit), 1 (16-bit)

Detailed Pin Configuration

The ATMEGA88V-10AU has a total of 32 pins, each serving specific functions related to I/O, power supply, communication, and programming. A detailed pin configuration diagram can be found in the datasheet provided by Microchip Technology.

Functional Features

  • Low Power Consumption: The microcontroller is designed to operate efficiently in low-power applications, extending battery life in portable devices.
  • Versatile I/O Capabilities: With 23 I/O pins, the ATMEGA88V-10AU offers flexibility in interfacing with external components and peripherals.
  • Integrated Communication Interfaces: The built-in UART, SPI, and I2C interfaces enable seamless communication with other devices.

Advantages and Disadvantages

Advantages

  • Efficient power management
  • Versatile I/O capabilities
  • Integrated communication interfaces

Disadvantages

  • Limited flash memory compared to higher-end microcontrollers
  • Lower CPU speed compared to some competing models

Working Principles

The ATMEGA88V-10AU operates based on the principles of embedded system design, utilizing its CPU, memory, and I/O capabilities to execute programmed tasks. It interacts with external components through its I/O pins and communication interfaces, enabling control and data exchange within the system.

Detailed Application Field Plans

The ATMEGA88V-10AU finds application in various fields, including: - Industrial automation - Home automation - Consumer electronics - Automotive systems - Medical devices

Detailed and Complete Alternative Models

  • ATMEGA168V-10AU: Similar features with increased flash memory
  • ATMEGA328P-PU: Higher flash memory and additional features
  • ATMEGA16U2: USB interface support with comparable specifications

In conclusion, the ATMEGA88V-10AU is a versatile microcontroller suitable for a wide range of embedded system applications, offering a balance of performance, power efficiency, and I/O capabilities.

[Word Count: 443]

技術ソリューションにおける ATMEGA88V-10AU の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the ATMEGA88V-10AU microcontroller used for?

    • The ATMEGA88V-10AU is commonly used in embedded systems for various applications such as industrial control, consumer electronics, and automation.

  2. What are the key features of the ATMEGA88V-10AU?

    • The ATMEGA88V-10AU features 8KB of flash memory, 1KB of SRAM, 23 general-purpose I/O lines, and operates at a maximum frequency of 10MHz.

  3. How do I program the ATMEGA88V-10AU?

    • The ATMEGA88V-10AU can be programmed using popular development environments such as Atmel Studio or Arduino IDE, using languages like C or assembly.

  4. What are the communication interfaces supported by the ATMEGA88V-10AU?

    • The ATMEGA88V-10AU supports USART, SPI, and I2C communication interfaces for connecting to other devices and peripherals.

  5. Can the ATMEGA88V-10AU be used for low-power applications?

    • Yes, the ATMEGA88V-10AU features power-saving sleep modes and low-power consumption, making it suitable for battery-powered or energy-efficient designs.

  6. Is the ATMEGA88V-10AU suitable for analog sensor interfacing?

    • Yes, the ATMEGA88V-10AU has built-in analog-to-digital converters (ADC) that enable it to interface with various analog sensors and signals.

  7. What kind of development tools are available for the ATMEGA88V-10AU?

    • There are various development boards, programmers, and debuggers available for the ATMEGA88V-10AU, along with extensive documentation and application notes from the manufacturer.

  8. Can the ATMEGA88V-10AU be used in automotive applications?

    • Yes, the ATMEGA88V-10AU is suitable for automotive applications that require robust and reliable microcontrollers, provided it meets the specific environmental and safety requirements.

  9. What are the typical voltage and temperature operating ranges for the ATMEGA88V-10AU?

    • The ATMEGA88V-10AU operates within a voltage range of 2.7V to 5.5V and a temperature range of -40°C to 85°C, making it suitable for a wide range of operating conditions.

  10. Are there any known limitations or common issues when using the ATMEGA88V-10AU?

    • While the ATMEGA88V-10AU is a versatile microcontroller, some users have reported challenges with optimizing code size and managing limited resources, which can be addressed through careful design and programming practices.