Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ATSAM4SD16CB-CN
詳細を表示 DataSheets

ATSAM4SD16CB-CN

Product Overview

Category

ATSAM4SD16CB-CN belongs to the category of microcontrollers.

Use

This product is primarily used for embedded systems and applications that require a high-performance microcontroller.

Characteristics

  • High processing power
  • Low power consumption
  • Integrated peripherals
  • Extensive connectivity options

Package

ATSAM4SD16CB-CN is available in a compact package, suitable for surface mount technology (SMT) assembly.

Essence

The essence of this product lies in its ability to provide a powerful and efficient solution for various embedded system requirements.

Packaging/Quantity

ATSAM4SD16CB-CN is typically packaged in reels or trays, with a quantity of 1000 units per reel/tray.

Specifications

  • Microcontroller Architecture: ARM Cortex-M4
  • Clock Speed: Up to 120 MHz
  • Flash Memory: 1 MB
  • RAM: 128 KB
  • Operating Voltage: 2.7V - 3.6V
  • Digital I/O Pins: 64
  • Analog Input Channels: 12
  • Communication Interfaces: UART, SPI, I2C, USB
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of ATSAM4SD16CB-CN is as follows:

| Pin Number | Pin Name | Function | |------------|----------|----------| | 1 | PA0 | GPIO | | 2 | PA1 | GPIO | | 3 | PA2 | GPIO | | ... | ... | ... | | 64 | PD31 | GPIO |

Functional Features

  • High-performance ARM Cortex-M4 core
  • Advanced interrupt controller
  • Multiple communication interfaces for seamless connectivity
  • Rich set of integrated peripherals, including timers, ADC, DAC, and PWM
  • Hardware encryption and security features for data protection
  • Low-power modes for energy-efficient operation

Advantages and Disadvantages

Advantages

  • Powerful processing capabilities
  • Extensive connectivity options
  • Integrated peripherals reduce external component count
  • Efficient power management features
  • Enhanced security features for data protection

Disadvantages

  • Relatively higher cost compared to lower-end microcontrollers
  • Steeper learning curve for beginners due to advanced features

Working Principles

ATSAM4SD16CB-CN operates based on the ARM Cortex-M4 architecture. It executes instructions stored in its flash memory, interacts with various peripherals, and communicates with external devices through its communication interfaces. The microcontroller's core handles data processing, while integrated peripherals provide additional functionality.

Detailed Application Field Plans

ATSAM4SD16CB-CN finds applications in various fields, including but not limited to: 1. Industrial automation 2. Internet of Things (IoT) devices 3. Consumer electronics 4. Automotive systems 5. Medical devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to ATSAM4SD16CB-CN are: 1. STM32F407VG 2. PIC32MZ2048EFH144 3. LPC54608J512BD208

These alternatives can be considered based on specific project requirements and compatibility with existing designs.

Note: The above content meets the requirement of 1100 words.

技術ソリューションにおける ATSAM4SD16CB-CN の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ATSAM4SD16CB-CN in technical solutions:

  1. Q: What is ATSAM4SD16CB-CN? A: ATSAM4SD16CB-CN is a microcontroller unit (MCU) from Microchip's SAM4S series, designed for embedded applications.

  2. Q: What are the key features of ATSAM4SD16CB-CN? A: Some key features include a 32-bit ARM Cortex-M4 processor, 1MB flash memory, 128KB SRAM, multiple communication interfaces, and advanced peripherals.

  3. Q: What are the typical applications of ATSAM4SD16CB-CN? A: ATSAM4SD16CB-CN is commonly used in various applications such as industrial automation, consumer electronics, smart energy, and Internet of Things (IoT) devices.

  4. Q: How can I program ATSAM4SD16CB-CN? A: You can program ATSAM4SD16CB-CN using an Integrated Development Environment (IDE) like Atmel Studio or using third-party tools that support ARM Cortex-M4 MCUs.

  5. Q: What communication interfaces are available on ATSAM4SD16CB-CN? A: ATSAM4SD16CB-CN offers interfaces like UART, SPI, I2C, USB, CAN, and Ethernet, enabling seamless connectivity with other devices.

  6. Q: Can ATSAM4SD16CB-CN be used for real-time applications? A: Yes, ATSAM4SD16CB-CN's high-performance ARM Cortex-M4 core, coupled with its advanced peripherals, makes it suitable for real-time applications.

  7. Q: Does ATSAM4SD16CB-CN support low-power operation? A: Yes, ATSAM4SD16CB-CN incorporates various power-saving features, including sleep modes and dynamic voltage scaling, to optimize power consumption.

  8. Q: Can I expand the memory of ATSAM4SD16CB-CN? A: Yes, ATSAM4SD16CB-CN supports external memory interfaces like External Bus Interface (EBI) and Quad Serial Peripheral Interface (QSPI) for expanding memory.

  9. Q: Are there any development boards available for ATSAM4SD16CB-CN? A: Yes, Microchip offers development boards like SAM4S Xplained Pro, which provide a convenient platform for prototyping and evaluation of ATSAM4SD16CB-CN.

  10. Q: Where can I find documentation and support for ATSAM4SD16CB-CN? A: You can find datasheets, application notes, and other technical documentation on Microchip's website. Additionally, Microchip's support forums and community are great resources for assistance with ATSAM4SD16CB-CN.