Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ATSAMD20E16A-MNT
詳細を表示 DataSheets

ATSAMD20E16A-MNT

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, Internet of Things (IoT) devices
  • Characteristics: Low-power, high-performance, small form factor
  • Package: Surface Mount Technology (SMT)
  • Essence: ARM Cortex-M0+ microcontroller with 16KB Flash memory
  • Packaging/Quantity: Tape and reel packaging, quantity varies

Specifications

  • Microcontroller: ATSAMD20E16A
  • Architecture: ARM Cortex-M0+
  • Flash Memory: 16KB
  • SRAM: 4KB
  • Operating Voltage: 1.62V to 3.63V
  • Maximum Clock Speed: 48MHz
  • Digital I/O Pins: 14
  • Analog Input Pins: 6
  • Communication Interfaces: UART, SPI, I2C, USB
  • Timers/Counters: 6
  • ADC Resolution: 12-bit
  • PWM Channels: 6
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The ATSAMD20E16A-MNT microcontroller has a total of 32 pins. The pin configuration is as follows:

  • Pin 1: VDDANA (Analog Power Supply)
  • Pin 2: PA02 (Analog Input/Output)
  • Pin 3: PA03 (Analog Input/Output)
  • Pin 4: GND (Ground)
  • Pin 5: PA04 (Analog Input/Output)
  • Pin 6: PA05 (Analog Input/Output)
  • Pin 7: PA06 (Analog Input/Output)
  • Pin 8: PA07 (Analog Input/Output)
  • Pin 9: PB08 (Digital Input/Output)
  • Pin 10: PB09 (Digital Input/Output)
  • Pin 11: PA08 (Digital Input/Output)
  • Pin 12: PA09 (Digital Input/Output)
  • Pin 13: PA10 (Digital Input/Output)
  • Pin 14: PA11 (Digital Input/Output)
  • Pin 15: GND (Ground)
  • Pin 16: PA14 (Digital Input/Output)
  • Pin 17: PA15 (Digital Input/Output)
  • Pin 18: PB10 (Digital Input/Output)
  • Pin 19: PB11 (Digital Input/Output)
  • Pin 20: PA16 (Digital Input/Output)
  • Pin 21: PA17 (Digital Input/Output)
  • Pin 22: PA18 (Digital Input/Output)
  • Pin 23: PA19 (Digital Input/Output)
  • Pin 24: PA22 (Digital Input/Output)
  • Pin 25: PA23 (Digital Input/Output)
  • Pin 26: PA24 (Digital Input/Output)
  • Pin 27: PA25 (Digital Input/Output)
  • Pin 28: GND (Ground)
  • Pin 29: VDDCORE (Core Power Supply)
  • Pin 30: VDDIN (Input Power Supply)
  • Pin 31: GND (Ground)
  • Pin 32: VDDIO (I/O Power Supply)

Functional Features

  • Low-power consumption for energy-efficient applications
  • High-performance ARM Cortex-M0+ core for efficient processing
  • Small form factor for space-constrained designs
  • Wide operating voltage range for flexibility in power supply options
  • Multiple communication interfaces for connectivity with other devices
  • Rich set of timers/counters and PWM channels for precise timing control
  • 12-bit ADC for accurate analog signal measurement

Advantages and Disadvantages

Advantages: - Low-power consumption extends battery life in portable devices - High-performance core enables fast and efficient processing - Small form factor allows for compact and lightweight designs - Wide operating voltage range provides flexibility in power supply options

Disadvantages: - Limited Flash memory and SRAM may restrict the complexity of applications - Limited number of digital I/O pins may limit the connectivity options

Working Principles

The ATSAMD20E16A-MNT microcontroller operates based on the ARM Cortex-M0+ architecture. It executes instructions stored in its Flash memory to perform various tasks. The microcontroller communicates with other devices through its communication interfaces such as UART, SPI, I2C, and USB. It can read analog signals using its built-in ADC and generate precise timing using its timers/counters and PWM channels.

Detailed Application Field Plans

The ATSAMD20E16A-MNT microcontroller is suitable for a wide range of applications, including but not limited to:

  1. Internet of Things (IoT) devices: The low-power consumption and small form factor make it ideal for IoT devices that require long battery life and compact size.
  2. Home automation systems: The microcontroller can be used to control and

技術ソリューションにおける ATSAMD20E16A-MNT の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ATSAMD20E16A-MNT in technical solutions:

  1. Q: What is the ATSAMD20E16A-MNT microcontroller used for? A: The ATSAMD20E16A-MNT is a microcontroller that can be used in various technical solutions, such as IoT devices, industrial automation, and consumer electronics.

  2. Q: What is the maximum clock speed of the ATSAMD20E16A-MNT? A: The ATSAMD20E16A-MNT has a maximum clock speed of 48 MHz.

  3. Q: How much flash memory does the ATSAMD20E16A-MNT have? A: The ATSAMD20E16A-MNT has 256 KB of flash memory.

  4. Q: Can I use the ATSAMD20E16A-MNT for low-power applications? A: Yes, the ATSAMD20E16A-MNT has low-power features, making it suitable for battery-powered or energy-efficient applications.

  5. Q: Does the ATSAMD20E16A-MNT support analog-to-digital conversion (ADC)? A: Yes, the ATSAMD20E16A-MNT has a built-in ADC with up to 12-bit resolution.

  6. Q: Can I connect external peripherals to the ATSAMD20E16A-MNT? A: Yes, the ATSAMD20E16A-MNT has multiple GPIO pins that can be used to connect external peripherals like sensors, displays, or actuators.

  7. Q: Is the ATSAMD20E16A-MNT compatible with Arduino IDE? A: Yes, the ATSAMD20E16A-MNT is compatible with the Arduino IDE, allowing you to easily develop and program your applications.

  8. Q: What communication interfaces are supported by the ATSAMD20E16A-MNT? A: The ATSAMD20E16A-MNT supports various communication interfaces, including I2C, SPI, UART, and USB.

  9. Q: Can I use the ATSAMD20E16A-MNT for real-time applications? A: Yes, the ATSAMD20E16A-MNT has a built-in real-time clock (RTC) and can be used for real-time applications that require precise timing.

  10. Q: Is the ATSAMD20E16A-MNT suitable for industrial environments? A: Yes, the ATSAMD20E16A-MNT is designed to operate in industrial temperature ranges and has features like ESD protection, making it suitable for industrial environments.

Please note that these answers are general and may vary depending on specific implementation details or requirements.