Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ATSAMD21G17A-AU
詳細を表示 DataSheets

ATSAMD21G17A-AU

Introduction

The ATSAMD21G17A-AU is a microcontroller belonging to the SAM D21 series, which is part of the Atmel | SMART ARM-based microcontroller family. This versatile microcontroller is designed for a wide range of applications and offers a balance of performance, power efficiency, and connectivity options.

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, IoT devices, consumer electronics
  • Characteristics: Low power consumption, high performance, rich peripheral integration
  • Package: TQFP (Thin Quad Flat Package)
  • Essence: Efficient and flexible microcontroller solution
  • Packaging/Quantity: Typically available in reels with varying quantities

Specifications

  • Architecture: 32-bit ARM Cortex-M0+
  • Clock Speed: Up to 48 MHz
  • Flash Memory: 256 KB
  • SRAM: 32 KB
  • Operating Voltage: 1.62V - 3.63V
  • I/O Pins: 32
  • Communication Interfaces: UART, SPI, I2C, USB
  • Analog Inputs: 14-bit ADC

Detailed Pin Configuration

The ATSAMD21G17A-AU features a comprehensive pin configuration, including GPIO pins, communication interfaces, analog inputs, and power supply pins. A detailed pinout diagram can be found in the official datasheet.

Functional Features

  • Peripheral Integration: The microcontroller integrates various peripherals such as timers, PWM controllers, and communication interfaces, reducing the need for external components.
  • Low Power Modes: It offers multiple low-power modes, enabling energy-efficient operation for battery-powered applications.
  • Security Features: Built-in security features such as hardware cryptography and secure boot ensure data integrity and system protection.

Advantages and Disadvantages

Advantages

  • High-performance ARM Cortex-M0+ core
  • Rich peripheral set for versatile application support
  • Low power consumption for extended battery life

Disadvantages

  • Limited onboard memory for certain demanding applications
  • Higher cost compared to entry-level microcontrollers

Working Principles

The ATSAMD21G17A-AU operates based on the ARM Cortex-M0+ architecture, executing instructions and managing peripherals to perform various tasks. Its low-power design and efficient processing enable it to handle diverse embedded system requirements.

Detailed Application Field Plans

  • IoT Devices: Utilized in smart home devices, environmental sensors, and connected appliances.
  • Consumer Electronics: Integrated into wearables, portable gadgets, and human-machine interface devices.
  • Industrial Automation: Used in control systems, monitoring equipment, and industrial IoT solutions.

Detailed and Complete Alternative Models

  • ATSAMD21E18A: Offers higher flash memory and additional features for more demanding applications.
  • ATSAMD20E15B: Provides a cost-effective alternative with reduced memory and peripheral set.

In conclusion, the ATSAMD21G17A-AU microcontroller offers a compelling combination of performance, power efficiency, and integrated features, making it suitable for a wide range of embedded applications.

Word Count: 443

技術ソリューションにおける ATSAMD21G17A-AU の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. What is the ATSAMD21G17A-AU microcontroller used for?

    • The ATSAMD21G17A-AU microcontroller is commonly used in a variety of technical solutions, including IoT devices, consumer electronics, and industrial automation.

  2. What are the key features of the ATSAMD21G17A-AU?

    • The ATSAMD21G17A-AU features a 32-bit ARM Cortex-M0+ processor, 256KB of flash memory, 32KB of SRAM, and a wide range of peripherals such as UART, SPI, I2C, and USB interfaces.

  3. How does the ATSAMD21G17A-AU support low-power applications?

    • The ATSAMD21G17A-AU offers multiple low-power modes, including standby, sleep, and backup modes, making it suitable for battery-powered and energy-efficient devices.

  4. Can the ATSAMD21G17A-AU be programmed using Arduino IDE?

    • Yes, the ATSAMD21G17A-AU can be programmed using the Arduino IDE with the help of the Arduino Zero board package.

  5. What development tools are compatible with the ATSAMD21G17A-AU?

    • Development tools such as Atmel Studio, MPLAB X IDE, and PlatformIO support programming and debugging of the ATSAMD21G17A-AU.

  6. Does the ATSAMD21G17A-AU support communication protocols like I2C and SPI?

    • Yes, the ATSAMD21G17A-AU includes hardware support for I2C, SPI, and other communication protocols, making it suitable for interfacing with various sensors and peripherals.

  7. What are the available analog-to-digital converter (ADC) channels on the ATSAMD21G17A-AU?

    • The ATSAMD21G17A-AU provides up to 14 channels of 12-bit ADC, allowing for precise analog signal acquisition in embedded systems.

  8. Is the ATSAMD21G17A-AU suitable for real-time control applications?

    • With its fast and efficient ARM Cortex-M0+ processor, the ATSAMD21G17A-AU is well-suited for real-time control applications in robotics, motor control, and automation.

  9. Can the ATSAMD21G17A-AU be used in safety-critical applications?

    • The ATSAMD21G17A-AU offers features such as built-in watchdog timers and brown-out detection, making it suitable for safety-critical applications with proper design considerations.

  10. Are there any known limitations or common issues when using the ATSAMD21G17A-AU?

    • While the ATSAMD21G17A-AU is a versatile microcontroller, some users have reported challenges with USB host functionality and certain clock configurations, which may require careful consideration during design and development.