ATTINY13-20MMUR
Product Overview
The ATTINY13-20MMUR belongs to the category of microcontrollers and is designed for various embedded applications. It is known for its compact size, low power consumption, and versatile functionality. The package type is surface mount technology (SMT), and it is available in a quantity suitable for small to medium-scale production.
Specifications
- Operating Voltage: 1.8 - 5.5V
- Flash Memory: 1KB
- SRAM: 64 bytes
- EEPROM: 64 bytes
- I/O Pins: 6
- Timers: 1
- Communication Interface: SPI, I2C, UART
Detailed Pin Configuration
The ATTINY13-20MMUR features a total of 8 pins, with each pin serving specific functions related to power supply, input/output, communication, and programming.
| Pin Number | Function | |------------|----------------| | 1 | Reset (RESET) | | 2 | Digital I/O | | 3 | Digital I/O | | 4 | Ground (GND) | | 5 | Digital I/O | | 6 | Analog/Digital | | 7 | Communication | | 8 | Power Supply |
Functional Features
The ATTINY13-20MMUR offers a wide range of functional features, including: - Low power consumption - High-performance RISC CPU - Flexible communication interfaces - On-chip analog comparator - Wide operating voltage range
Advantages and Disadvantages
Advantages
- Compact size
- Low power consumption
- Versatile functionality
- Cost-effective solution for embedded systems
Disadvantages
- Limited memory and I/O capabilities compared to higher-end microcontrollers
- Limited support for complex algorithms and large data processing
Working Principles
The ATTINY13-20MMUR operates based on the principles of embedded system design, utilizing its integrated CPU, memory, and I/O peripherals to execute programmed tasks. It follows a sequential execution model and can interface with external sensors, actuators, and communication devices.
Application Field Plans
The ATTINY13-20MMUR is well-suited for various applications, including: - Battery-powered devices - Sensor nodes - Home automation systems - Consumer electronics - Industrial control systems
Alternative Models
For those seeking alternatives to the ATTINY13-20MMUR, other microcontrollers with similar capabilities include: - ATtiny25/45/85 - PIC10F200 - STM8S003F3
In conclusion, the ATTINY13-20MMUR is a versatile microcontroller suitable for a wide range of embedded applications, offering a balance of performance, size, and cost-effectiveness.
Word count: 386
技術ソリューションにおける ATTINY13-20MMUR の適用に関連する 10 件の一般的な質問と回答をリストします。
What is the maximum clock speed of ATTINY13-20MMUR?
- The maximum clock speed of ATTINY13-20MMUR is 20 MHz.
What are the typical applications of ATTINY13-20MMUR?
- ATTINY13-20MMUR is commonly used in applications such as LED lighting control, battery chargers, sensor interfaces, and small motor control.
What is the operating voltage range for ATTINY13-20MMUR?
- The operating voltage range for ATTINY13-20MMUR is 1.8V to 5.5V.
Does ATTINY13-20MMUR have built-in EEPROM memory?
- Yes, ATTINY13-20MMUR has 64 bytes of built-in EEPROM memory.
Can ATTINY13-20MMUR be programmed using an ISP (In-System Programmer)?
- Yes, ATTINY13-20MMUR can be programmed using an ISP.
What are the available communication interfaces on ATTINY13-20MMUR?
- ATTINY13-20MMUR supports SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Circuit) communication interfaces.
Is ATTINY13-20MMUR suitable for low-power applications?
- Yes, ATTINY13-20MMUR is suitable for low-power applications due to its low power consumption and sleep modes.
What are the available package options for ATTINY13-20MMUR?
- ATTINY13-20MMUR is available in a 8-pin SOIC (Small Outline Integrated Circuit) package.
Does ATTINY13-20MMUR have analog-to-digital conversion (ADC) capability?
- Yes, ATTINY13-20MMUR has a 10-bit ADC with 4 channels.
Can ATTINY13-20MMUR be used in automotive applications?
- Yes, ATTINY13-20MMUR is suitable for some automotive applications, but it's important to ensure that it meets the specific requirements and standards for automotive use.