ATTINY26-16MI

Product Overview

Category

The ATTINY26-16MI belongs to the category of microcontrollers.

Use

It is primarily used for embedded systems and low-power applications.

Characteristics

• Low power consumption
• High performance
• Small form factor
• Integrated peripherals
• Flash memory for program storage

Package

The ATTINY26-16MI comes in a compact surface mount package.

Essence

This microcontroller combines high performance with low power consumption, making it suitable for various applications.

Packaging/Quantity

The ATTINY26-16MI is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

• Microcontroller architecture: AVR
• Operating voltage: 1.8V - 5.5V
• Clock speed: 16MHz
• Flash memory: 2KB
• RAM: 128 bytes
• EEPROM: 128 bytes
• Digital I/O pins: 20
• Analog input channels: 10
• Communication interfaces: SPI, I2C, UART

Detailed Pin Configuration

The ATTINY26-16MI has a total of 20 pins, each serving a specific purpose. The pin configuration is as follows:

1. VCC (Power supply)
2. GND (Ground)
3. PB0 (Digital I/O)
4. PB1 (Digital I/O)
5. PB2 (Digital I/O)
6. PB3 (Digital I/O)
7. PB4 (Digital I/O)
8. PB5 (Digital I/O)
9. RESET (Reset pin)
10. PA0 (Analog input)
11. PA1 (Analog input)
12. PA2 (Analog input)
13. PA3 (Analog input)
14. PA4 (Analog input)
15. PA5 (Analog input)
16. PA6 (Analog input)
17. PA7 (Analog input)
18. XTAL1 (Crystal oscillator input)
19. XTAL2 (Crystal oscillator output)
20. AVCC (Analog power supply)

Functional Features

• Low power consumption in active and idle modes
• Power-down mode for further power reduction
• Integrated analog-to-digital converter (ADC)
• Timers/counters for precise timing control
• PWM (Pulse Width Modulation) for analog signal generation
• Interrupt handling for efficient event-driven programming
• Serial communication interfaces for data exchange

Advantages and Disadvantages

Advantages

• Low power consumption makes it suitable for battery-powered devices
• Compact size allows for integration in space-constrained applications
• High-performance microcontroller with a range of integrated peripherals
• Versatile communication interfaces enable easy connectivity

Disadvantages

• Limited program and data memory compared to higher-end microcontrollers
• Lack of advanced features found in more specialized microcontrollers

Working Principles

The ATTINY26-16MI operates based on the AVR architecture, utilizing a combination of hardware and software to execute instructions. It follows a Von Neumann architecture, where program instructions and data are stored in the same memory space. The microcontroller fetches instructions from the flash memory, decodes them, and executes the corresponding operations. It interacts with external devices through its I/O pins and communication interfaces.

Detailed Application Field Plans

The ATTINY26-16MI finds applications in various fields, including but not limited to:

1. Home automation systems
2. Industrial control systems
3. Internet of Things (IoT) devices
4. Wearable technology
5. Consumer electronics
6. Automotive electronics
7. Medical devices
8. Robotics

Detailed and Complete Alternative Models

1. ATTINY25-20PU: Similar to ATTINY26-16MI but with a different package and lower clock speed.
2. ATTINY45-20SU: Offers more program and data memory compared to ATTINY26-16MI.
3. ATTINY85-20PU: Higher pin count and additional features such as internal oscillator and EEPROM.

These alternative models provide options with varying specifications and capabilities, allowing developers to choose the most suitable microcontroller for their specific requirements.

Word count: 550 words