Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ATTINY44-20PU
詳細を表示 DataSheets

ATTINY44-20PU

Product Overview

Category

The ATTINY44-20PU belongs to the category of microcontrollers.

Use

It is commonly used for various electronic applications that require a compact and low-power microcontroller.

Characteristics

  • Low power consumption
  • High performance
  • Small form factor
  • Wide operating voltage range

Package

The ATTINY44-20PU comes in a 14-pin DIP (Dual Inline Package) format.

Essence

The essence of the ATTINY44-20PU lies in its ability to provide efficient processing capabilities in a small package, making it suitable for space-constrained applications.

Packaging/Quantity

The ATTINY44-20PU is typically packaged in tubes or trays, with quantities varying depending on the supplier.

Specifications

  • Microcontroller architecture: AVR
  • Flash memory: 4KB
  • RAM: 256 bytes
  • Operating voltage: 1.8V - 5.5V
  • Clock speed: 20MHz
  • Digital I/O pins: 12
  • Analog input channels: 8
  • Communication interfaces: SPI, I2C, UART

Detailed Pin Configuration

The ATTINY44-20PU has a total of 14 pins, each serving a specific purpose. The pin configuration is as follows:

  1. PB0 - Digital I/O Pin
  2. PB1 - Digital I/O Pin
  3. PB2 - Digital I/O Pin
  4. PB3 - Digital I/O Pin
  5. GND - Ground
  6. PB4 - Digital I/O Pin
  7. PB5 - Digital I/O Pin
  8. RESET - Reset Pin
  9. VCC - Power Supply
  10. PA0 - Analog Input Pin
  11. PA1 - Analog Input Pin
  12. PA2 - Analog Input Pin
  13. PA3 - Analog Input Pin
  14. PA4 - Analog Input Pin

Functional Features

  • Low power consumption allows for extended battery life in portable devices.
  • High-performance AVR architecture enables efficient execution of instructions.
  • Wide operating voltage range provides flexibility in various power supply scenarios.
  • Multiple communication interfaces facilitate seamless integration with other devices.

Advantages and Disadvantages

Advantages

  • Compact size makes it suitable for space-constrained applications.
  • Low power consumption extends battery life.
  • Versatile communication interfaces enhance connectivity options.

Disadvantages

  • Limited flash memory and RAM may restrict the complexity of applications.
  • The 14-pin package may have limitations in terms of I/O expansion.

Working Principles

The ATTINY44-20PU operates based on the AVR architecture, utilizing a combination of hardware and software to execute instructions. It follows a Von Neumann architecture, where program instructions and data are stored in the same memory space.

Detailed Application Field Plans

The ATTINY44-20PU finds applications in various fields, including but not limited to: - Home automation systems - Internet of Things (IoT) devices - Wearable technology - Sensor networks - Embedded systems

Detailed and Complete Alternative Models

  • ATTINY45-20PU: Similar specifications and pin configuration, but with 8KB of flash memory instead of 4KB.
  • ATTINY84-20PU: Higher pin count (14 pins), offering additional I/O options while maintaining similar specifications.

In conclusion, the ATTINY44-20PU is a compact and low-power microcontroller that offers high performance and versatility. Its wide range of applications and availability of alternative models make it a popular choice among electronics enthusiasts and professionals alike.

Word Count: 511

技術ソリューションにおける ATTINY44-20PU の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ATTINY44-20PU in technical solutions:

  1. Q: What is ATTINY44-20PU? A: ATTINY44-20PU is a microcontroller from the AVR family, manufactured by Atmel (now Microchip Technology). It has 8KB of flash memory, 512 bytes of EEPROM, and 512 bytes of SRAM.

  2. Q: What are the main features of ATTINY44-20PU? A: The main features of ATTINY44-20PU include 12 I/O pins, 4 PWM channels, 8-channel 10-bit ADC, internal oscillator, SPI, I2C, and UART interfaces.

  3. Q: What voltage does ATTINY44-20PU operate at? A: ATTINY44-20PU operates at a voltage range of 1.8V to 5.5V.

  4. Q: Can ATTINY44-20PU be programmed using Arduino IDE? A: Yes, ATTINY44-20PU can be programmed using Arduino IDE with the help of an external programmer or by using the "Arduino as ISP" method.

  5. Q: What programming language is used for ATTINY44-20PU? A: ATTINY44-20PU can be programmed using C/C++ language.

  6. Q: Can ATTINY44-20PU be used for IoT applications? A: Yes, ATTINY44-20PU can be used for simple IoT applications that require low power consumption and basic functionality.

  7. Q: How much flash memory is available for user code on ATTINY44-20PU? A: ATTINY44-20PU provides 8KB of flash memory for user code storage.

  8. Q: Can ATTINY44-20PU be used in battery-powered applications? A: Yes, ATTINY44-20PU is suitable for battery-powered applications due to its low power consumption and sleep modes.

  9. Q: What are the communication interfaces supported by ATTINY44-20PU? A: ATTINY44-20PU supports SPI (Serial Peripheral Interface), I2C (Inter-Integrated Circuit), and UART (Universal Asynchronous Receiver-Transmitter) interfaces.

  10. Q: Are there any development boards available for ATTINY44-20PU? A: Yes, there are development boards available specifically designed for ATTINY44-20PU, such as the Digispark or Adafruit Trinket, which make it easier to prototype and program the microcontroller.

Please note that these answers are general and may vary depending on specific use cases and requirements.