Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
ATTINY45-15MT1

ATTINY45-15MT1

Product Overview

Category

The ATTINY45-15MT1 belongs to the category of microcontrollers.

Use

It is commonly used in various electronic devices and applications that require a compact and low-power microcontroller.

Characteristics

  • Low power consumption
  • Small form factor
  • High performance
  • Versatile functionality

Package

The ATTINY45-15MT1 is available in a surface mount package.

Essence

This microcontroller is designed to provide efficient processing capabilities while consuming minimal power, making it suitable for battery-powered devices and applications with limited power resources.

Packaging/Quantity

The ATTINY45-15MT1 is typically packaged in reels or tubes, with a quantity of 2500 units per reel/tube.

Specifications

  • Operating Voltage: 1.8V - 5.5V
  • Flash Memory: 4KB
  • SRAM: 256 bytes
  • EEPROM: 256 bytes
  • Clock Speed: Up to 20MHz
  • Digital I/O Pins: 6
  • Analog Input Pins: 4
  • PWM Channels: 3
  • Communication Interfaces: SPI, I2C, UART

Detailed Pin Configuration

The ATTINY45-15MT1 has a total of 8 pins, each serving a specific purpose:

  1. VCC: Power supply voltage input
  2. GND: Ground reference
  3. PB3 (MISO): Master In Slave Out (SPI communication)
  4. PB4 (OC1B): Output Compare Match B (PWM output)
  5. PB0 (MOSI): Master Out Slave In (SPI communication)
  6. PB1 (SCK): Serial Clock (SPI communication)
  7. PB2 (SS): Slave Select (SPI communication)
  8. RESET: Reset pin for restarting the microcontroller

Functional Features

  • Low power consumption in active and idle modes
  • High-performance CPU with advanced RISC architecture
  • Multiple communication interfaces for versatile connectivity options
  • Built-in analog-to-digital converter (ADC) for precise analog measurements
  • Flexible PWM channels for controlling various output devices
  • Programmable watchdog timer for system reliability

Advantages and Disadvantages

Advantages

  • Compact size enables integration into space-constrained designs
  • Low power consumption extends battery life in portable applications
  • Versatile functionality allows for a wide range of applications
  • Cost-effective solution for microcontroller-based projects

Disadvantages

  • Limited number of I/O pins may restrict the complexity of certain projects
  • Lack of built-in hardware peripherals compared to higher-end microcontrollers

Working Principles

The ATTINY45-15MT1 operates based on the principles of digital logic and microcontroller architecture. It executes instructions stored in its flash memory, interacts with external components through its I/O pins, and communicates with other devices using various communication protocols.

Detailed Application Field Plans

The ATTINY45-15MT1 finds applications in various fields, including but not limited to:

  1. Internet of Things (IoT) devices
  2. Wearable electronics
  3. Home automation systems
  4. Sensor networks
  5. Industrial control systems
  6. Consumer electronics
  7. Automotive electronics

Detailed and Complete Alternative Models

  1. ATTINY25-20PU: Similar specifications with a lower flash memory capacity.
  2. ATTINY85-20PU: Similar specifications with a higher flash memory capacity.
  3. ATTINY44A-SSU: Similar specifications with additional I/O pins.

These alternative models provide flexibility in choosing the appropriate microcontroller based on specific project requirements.

In conclusion, the ATTINY45-15MT1 is a compact and low-power microcontroller that offers high performance and versatile functionality. Its small form factor and low power consumption make it suitable for a wide range of applications, particularly in portable and battery-powered devices. With its advanced features and flexible pin configuration, the ATTINY45-15MT1 provides an efficient solution for various electronic projects.

技術ソリューションにおける ATTINY45-15MT1 の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of ATTINY45-15MT1 in technical solutions:

  1. Q: What is ATTINY45-15MT1? A: ATTINY45-15MT1 is a microcontroller from the AVR family, manufactured by Atmel. It has 4KB of flash memory, 256 bytes of SRAM, and operates at a clock frequency of 16MHz.

  2. Q: What are some typical applications of ATTINY45-15MT1? A: ATTINY45-15MT1 is commonly used in various embedded systems, such as home automation, IoT devices, robotics, sensor networks, and small-scale projects that require low power consumption.

  3. Q: How do I program ATTINY45-15MT1? A: ATTINY45-15MT1 can be programmed using an In-System Programmer (ISP) or through a bootloader. You can use software like Atmel Studio or Arduino IDE to write and upload your code to the microcontroller.

  4. Q: What programming languages can I use with ATTINY45-15MT1? A: ATTINY45-15MT1 supports programming in C/C++ using the AVR-GCC compiler. Additionally, you can use Arduino's simplified programming language if you prefer a beginner-friendly approach.

  5. Q: Can ATTINY45-15MT1 communicate with other devices? A: Yes, ATTINY45-15MT1 has several communication interfaces, including SPI (Serial Peripheral Interface) and I2C (Inter-Integrated Circuit), which allow it to communicate with other devices like sensors, displays, and other microcontrollers.

  6. Q: How many input/output pins does ATTINY45-15MT1 have? A: ATTINY45-15MT1 has a total of 6 I/O pins, which can be configured as digital inputs or outputs. Some of these pins also have additional functionalities like PWM (Pulse Width Modulation) and ADC (Analog-to-Digital Conversion).

  7. Q: Can ATTINY45-15MT1 handle analog signals? A: Yes, ATTINY45-15MT1 has an onboard Analog-to-Digital Converter (ADC), allowing it to read analog signals from sensors or other analog devices.

  8. Q: What is the power supply voltage range for ATTINY45-15MT1? A: ATTINY45-15MT1 operates at a voltage range of 2.7V to 5.5V, making it compatible with various power sources, including batteries and regulated power supplies.

  9. Q: How much current can ATTINY45-15MT1 source or sink on its I/O pins? A: Each I/O pin of ATTINY45-15MT1 can source or sink up to 20mA of current. However, the total current sourced or sunk by all pins combined should not exceed 100mA.

  10. Q: Is ATTINY45-15MT1 suitable for low-power applications? A: Yes, ATTINY45-15MT1 is designed for low-power applications. It has several power-saving features, such as sleep modes, which allow you to minimize power consumption when the microcontroller is idle.

Please note that these answers are general and may vary depending on specific implementation details and requirements.