Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
DSPIC33CK256MP503-I/M5
詳細を表示 DataSheets

DSPIC33CK256MP503-I/M5

Basic Information Overview

  • Category: Microcontroller
  • Use: Embedded systems, control applications
  • Characteristics: High performance, low power consumption, integrated peripherals
  • Package: 48-pin QFN
  • Essence: Digital Signal Controller (DSC) with advanced features
  • Packaging/Quantity: Tape and reel, 2500 units per reel

Specifications

  • Core: dsPIC33CK
  • CPU Speed: Up to 100 MHz
  • Flash Memory: 256 KB
  • RAM: 32 KB
  • Operating Voltage Range: 2.7V to 3.6V
  • ADC Resolution: 12-bit
  • Number of PWM Channels: 8
  • Communication Interfaces: UART, SPI, I2C, CAN
  • Timers: 4 x 16-bit, 2 x 32-bit
  • Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The DSPIC33CK256MP503-I/M5 microcontroller has a total of 48 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. VSS - Ground
  3. RA0 - General-purpose I/O pin
  4. RA1 - General-purpose I/O pin
  5. RA2 - General-purpose I/O pin
  6. RA3 - General-purpose I/O pin
  7. RA4 - General-purpose I/O pin
  8. RA5 - General-purpose I/O pin
  9. RA6 - General-purpose I/O pin
  10. RA7 - General-purpose I/O pin
  11. RB0 - General-purpose I/O pin
  12. RB1 - General-purpose I/O pin
  13. RB2 - General-purpose I/O pin
  14. RB3 - General-purpose I/O pin
  15. RB4 - General-purpose I/O pin
  16. RB5 - General-purpose I/O pin
  17. RB6 - General-purpose I/O pin
  18. RB7 - General-purpose I/O pin
  19. RB8 - General-purpose I/O pin
  20. RB9 - General-purpose I/O pin
  21. RB10 - General-purpose I/O pin
  22. RB11 - General-purpose I/O pin
  23. RB12 - General-purpose I/O pin
  24. RB13 - General-purpose I/O pin
  25. RB14 - General-purpose I/O pin
  26. RB15 - General-purpose I/O pin
  27. RC0 - General-purpose I/O pin
  28. RC1 - General-purpose I/O pin
  29. RC2 - General-purpose I/O pin
  30. RC3 - General-purpose I/O pin
  31. RC4 - General-purpose I/O pin
  32. RC5 - General-purpose I/O pin
  33. RC6 - General-purpose I/O pin
  34. RC7 - General-purpose I/O pin
  35. RC8 - General-purpose I/O pin
  36. RC9 - General-purpose I/O pin
  37. RC10 - General-purpose I/O pin
  38. RC11 - General-purpose I/O pin
  39. RC12 - General-purpose I/O pin
  40. RC13 - General-purpose I/O pin
  41. RC14 - General-purpose I/O pin
  42. RC15 - General-purpose I/O pin
  43. VCAP - External capacitor connection for internal voltage regulator
  44. VSS - Ground
  45. VDD - Power supply voltage
  46. OSC1 - Oscillator input
  47. OSC2 - Oscillator output
  48. MCLR - Master Clear (Reset) input

Functional Features

  • High-performance 16-bit DSC core
  • Advanced peripherals for control applications
  • Integrated ADC for analog signal processing
  • Multiple communication interfaces for data exchange
  • Flexible PWM channels for precise motor control
  • Enhanced security features for code protection

Advantages and Disadvantages

Advantages: - High performance and low power consumption - Integrated peripherals reduce external component count - Wide operating voltage range allows flexibility in power supply - Advanced features enable complex control applications

Disadvantages: - Limited flash memory and RAM compared to some other microcontrollers - Higher cost compared to basic microcontrollers with similar pin count - Requires knowledge of programming and microcontroller architecture for effective use

Working Principles

The DSPIC33CK256MP503-I/M5 microcontroller operates based on the dsPIC33CK core architecture. It executes instructions stored in its flash memory to perform various tasks. The integrated peripherals, such as ADC, PWM, and communication interfaces, allow the microcontroller to interact with the external world. The high-performance core enables fast and efficient execution of control algorithms.

Detailed Application Field Plans

The DSPIC33CK256MP503-I/M5 microcontroller is suitable for a wide range of applications, including but not limited

技術ソリューションにおける DSPIC33CK256MP503-I/M5 の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. Question: What are the key features of DSPIC33CK256MP503-I/M5?
    Answer: The DSPIC33CK256MP503-I/M5 features a high-performance DSC core, advanced peripherals, and extensive connectivity options.

  2. Question: How can I interface DSPIC33CK256MP503-I/M5 with external sensors?
    Answer: You can use the built-in ADC modules or connect external ADCs to interface with various sensors.

  3. Question: What communication interfaces are supported by DSPIC33CK256MP503-I/M5?
    Answer: It supports UART, SPI, I2C, CAN, and USB communication interfaces for seamless connectivity.

  4. Question: Can DSPIC33CK256MP503-I/M5 be used in motor control applications?
    Answer: Yes, it offers specialized motor control peripherals and algorithms for efficient motor control solutions.

  5. Question: How does DSPIC33CK256MP503-I/M5 support power management?
    Answer: It includes power-saving modes, voltage regulators, and power monitoring features for effective power management.

  6. Question: Is DSPIC33CK256MP503-I/M5 suitable for real-time signal processing?
    Answer: Absolutely, it offers high-speed processing capabilities and dedicated DSP instructions for real-time signal processing.

  7. Question: Can DSPIC33CK256MP503-I/M5 be programmed using standard development tools?
    Answer: Yes, it is compatible with popular IDEs and programming languages for easy development.

  8. Question: What security features are available in DSPIC33CK256MP503-I/M5?
    Answer: It provides hardware encryption, secure boot, and tamper detection features for enhanced security.

  9. Question: How can I optimize code execution on DSPIC33CK256MP503-I/M5?
    Answer: Utilize its advanced instruction set, parallel execution units, and compiler optimization for efficient code execution.

  10. Question: What are the recommended application areas for DSPIC33CK256MP503-I/M5?
    Answer: It is well-suited for industrial automation, power conversion, automotive, and consumer electronics applications.