Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
DSPIC33CK64MP506-I/PT
詳細を表示 DataSheets

DSPIC33CK64MP506-I/PT

Overview

  • Category: Microcontroller
  • Use: Embedded systems, control applications
  • Characteristics: High performance, low power consumption, advanced peripherals
  • Package: TQFP-44
  • Essence: Digital Signal Controller (DSC)
  • Packaging/Quantity: Tray/1000 units

Specifications

  • Core: dsPIC33CK
  • CPU Speed: Up to 100 MHz
  • Flash Memory: 64 KB
  • RAM: 8 KB
  • Operating Voltage: 2.3V - 3.6V
  • ADC Resolution: 12-bit
  • Number of Pins: 44
  • Communication Interfaces: UART, SPI, I2C, CAN
  • Timers: 16-bit and 32-bit
  • PWM Channels: Up to 9
  • Operating Temperature Range: -40°C to +85°C

Pin Configuration

The DSPIC33CK64MP506-I/PT microcontroller has a total of 44 pins. The pin configuration is as follows:

  1. VDD
  2. VSS
  3. OSC1/CLKI
  4. OSC2/CLKO
  5. AN0/RB0
  6. AN1/RB1
  7. AN2/RB2
  8. AN3/RB3
  9. AN4/RB4
  10. AN5/RB5
  11. AN6/RB6
  12. AN7/RB7
  13. RB8
  14. RB9
  15. RB10
  16. RB11
  17. RB12
  18. RB13
  19. RB14
  20. RB15
  21. VCAP
  22. AVDD
  23. AVSS
  24. REFO/RF0
  25. RF1
  26. RF2
  27. RF3
  28. RF4
  29. RF5
  30. RF6
  31. RF7
  32. RF8
  33. RF9
  34. RF10
  35. RF11
  36. RF12
  37. RF13
  38. RF14
  39. RF15
  40. VUSB3V3
  41. VBUS
  42. RB3/AN9/C1INB/U1CTS/U2RTS/BCLKO
  43. RB2/AN8/C1INA/U1RTS/U2CTS/SS1
  44. RB1/AN10/C2INA/U1RX/U2TX/SCK1

Functional Features

  • High-performance digital signal processing capabilities
  • Advanced peripherals for control applications
  • Low power consumption for energy-efficient designs
  • Wide operating voltage range for flexibility
  • Multiple communication interfaces for connectivity
  • Rich set of timers and PWM channels for precise timing and control

Advantages and Disadvantages

Advantages: - High performance for demanding applications - Low power consumption for energy efficiency - Advanced peripherals for versatile functionality - Wide operating voltage range for flexibility - Ample memory for program and data storage

Disadvantages: - Limited number of pins may restrict the number of external devices that can be connected - Higher cost compared to some other microcontrollers in the market

Working Principles

The DSPIC33CK64MP506-I/PT is based on the dsPIC33CK core, which combines a high-performance 16-bit MCU with a powerful DSP engine. It utilizes advanced digital signal processing techniques to efficiently process and manipulate signals in real-time. The microcontroller operates at high speeds of up to 100 MHz while consuming low power.

The device incorporates various peripherals such as UART, SPI, I2C, and CAN interfaces, allowing seamless communication with other devices. It also features a rich set of timers and PWM channels, enabling precise timing and control in various applications.

Detailed Application Field Plans

The DSPIC33CK64MP506-I/PT microcontroller is suitable for a wide range of applications, including but not limited to:

  1. Industrial automation systems
  2. Motor control applications
  3. Power management systems
  4. Sensor interfacing and data acquisition
  5. Home automation and smart devices
  6. Automotive electronics
  7. Medical devices
  8. Consumer electronics

Alternative Models

  • DSPIC33CK64MP505-I/PT
  • DSPIC33CK64MP504-I/PT
  • DSPIC33CK64MP503-I/PT
  • DSPIC33CK64MP502-I/PT

These alternative models offer similar functionality and performance, with variations in memory size, pin count, or package type.

In conclusion, the DSPIC33CK64MP506-I/PT microcontroller is a high-performance digital signal controller designed for embedded systems and control applications. With its advanced peripherals, low power consumption, and versatile functionality, it is well-suited for a wide range

技術ソリューションにおける DSPIC33CK64MP506-I/PT の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. Question: What are the key features of DSPIC33CK64MP506-I/PT?
    Answer: The DSPIC33CK64MP506-I/PT features high performance, low power consumption, and a wide range of peripherals for versatile applications.

  2. Question: How can I interface DSPIC33CK64MP506-I/PT with external sensors?
    Answer: You can use the built-in ADC modules to interface with various sensors and transducers.

  3. Question: What communication interfaces are supported by DSPIC33CK64MP506-I/PT?
    Answer: It supports SPI, I2C, UART, and CAN communication interfaces for seamless connectivity.

  4. Question: Can DSPIC33CK64MP506-I/PT be used in motor control applications?
    Answer: Yes, it is well-suited for motor control applications with its advanced PWM modules and motor control peripherals.

  5. Question: How does DSPIC33CK64MP506-I/PT handle real-time processing tasks?
    Answer: It offers deterministic and efficient real-time processing capabilities, making it suitable for time-critical applications.

  6. Question: What development tools are available for programming DSPIC33CK64MP506-I/PT?
    Answer: You can use MPLAB X IDE and MPLAB Code Configurator for easy development and programming.

  7. Question: Is DSPIC33CK64MP506-I/PT suitable for power electronics applications?
    Answer: Yes, it is suitable for power electronics applications with its high-resolution PWM and analog features.

  8. Question: Can DSPIC33CK64MP506-I/PT be used in battery-powered devices?
    Answer: Yes, it offers low power consumption and multiple low-power modes, making it suitable for battery-powered devices.

  9. Question: What security features does DSPIC33CK64MP506-I/PT offer?
    Answer: It provides hardware security features such as memory protection and secure boot for enhanced system security.

  10. Question: How can I optimize code for DSPIC33CK64MP506-I/PT?
    Answer: You can utilize the DSP instructions and compiler optimizations to efficiently optimize code for the device.