Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
DSPIC33EP128GP502T-I/SO
詳細を表示 DataSheets

DSPIC33EP128GP502T-I/SO

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, control applications
  • Characteristics: High-performance, low-power, 16-bit microcontroller
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Digital Signal Controller (DSC) with advanced peripherals
  • Packaging/Quantity: Tape and reel, 98 pieces per reel

Specifications

  • Architecture: dsPIC33E
  • CPU Speed: Up to 70 MIPS
  • Flash Memory: 128 KB
  • RAM: 16 KB
  • Operating Voltage: 2.5V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Number of I/O Pins: 44
  • Timers: 5 x 16-bit, 1 x 32-bit
  • Analog-to-Digital Converter (ADC): 10-bit, 16 channels
  • Communication Interfaces: UART, SPI, I2C, CAN
  • PWM Channels: 9
  • DMA Channels: 8
  • Package Type: SOIC-28

Detailed Pin Configuration

The DSPIC33EP128GP502T-I/SO microcontroller has a total of 44 pins. Here is the detailed pin configuration:

  • Pin 1: VDD - Power supply voltage
  • Pin 2: VSS - Ground
  • Pin 3: OSC1/CLKI - Oscillator input/clock input
  • Pin 4: OSC2/CLKO - Oscillator output/clock output
  • Pin 5: AN0/RB0 - Analog input 0/Port B0
  • Pin 6: AN1/RB1 - Analog input 1/Port B1
  • Pin 7: AN2/RB2 - Analog input 2/Port B2
  • Pin 8: AN3/RB3 - Analog input 3/Port B3
  • ... (continue with the remaining pins)

Functional Features

  • High-performance 16-bit microcontroller with DSP capabilities
  • Advanced peripherals for control applications
  • Efficient power management for low-power operation
  • Enhanced connectivity options for communication interfaces
  • Flexible and precise analog-to-digital conversion
  • Multiple timers and PWM channels for accurate timing and control
  • Direct Memory Access (DMA) for efficient data transfer
  • Comprehensive development tools and software libraries

Advantages and Disadvantages

Advantages: - High-performance processing capabilities - Extensive range of peripherals for versatile applications - Low-power operation for energy-efficient designs - Rich connectivity options for seamless integration - Ample memory for storing program code and data - Well-supported development ecosystem

Disadvantages: - Limited number of I/O pins compared to some other microcontrollers - Higher cost compared to lower-end microcontrollers - Steeper learning curve for beginners due to advanced features

Working Principles

The DSPIC33EP128GP502T-I/SO operates on a 16-bit architecture and combines the benefits of a microcontroller and a digital signal processor (DSP). It executes instructions at high speeds, up to 70 MIPS, making it suitable for demanding control applications. The microcontroller integrates various peripherals such as UART, SPI, I2C, and CAN for communication, along with timers, PWM channels, and an ADC for precise timing and analog signal processing.

The device operates within a specified voltage range and can withstand a wide temperature range, making it suitable for industrial environments. It utilizes efficient power management techniques to minimize power consumption, extending battery life in portable applications.

Detailed Application Field Plans

The DSPIC33EP128GP502T-I/SO finds applications in various fields, including:

  1. Industrial Automation: Control systems for machinery, robotics, and process automation.
  2. Automotive: Engine control units, body electronics, and advanced driver-assistance systems (ADAS).
  3. Power Electronics: Motor control, power inverters, and energy management systems.
  4. Medical Devices: Patient monitoring, diagnostic equipment, and implantable devices.
  5. Consumer Electronics: Home automation, smart appliances, and wearable devices.

Detailed and Complete Alternative Models

  1. DSPIC33EP128GP502T-I/PT - TQFP package variant of the same microcontroller.
  2. DSPIC33EP256GP502T-I/SO - Higher memory variant with 256 KB Flash and 32 KB RAM.
  3. DSPIC33EP64GP502T-I/SO - Lower memory variant with 64 KB Flash and 8 KB RAM.
  4. DSPIC33EP128GM604T-I/SO - Similar microcontroller with additional motor control features.
  5. DSPIC33EP128GS502T-I/SO - Variant with integrated graphics controller for display applications.

These alternative models offer different memory configurations, additional features, or package options to cater to

技術ソリューションにおける DSPIC33EP128GP502T-I/SO の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. Question: What is the maximum operating frequency of DSPIC33EP128GP502T-I/SO?
    Answer: The maximum operating frequency of DSPIC33EP128GP502T-I/SO is 70 MHz.

  2. Question: What are the key features of DSPIC33EP128GP502T-I/SO?
    Answer: DSPIC33EP128GP502T-I/SO features high performance, integrated peripherals, and low power consumption.

  3. Question: Can DSPIC33EP128GP502T-I/SO be used for motor control applications?
    Answer: Yes, DSPIC33EP128GP502T-I/SO is well-suited for motor control applications due to its advanced PWM modules and motor control peripherals.

  4. Question: What communication interfaces are supported by DSPIC33EP128GP502T-I/SO?
    Answer: DSPIC33EP128GP502T-I/SO supports SPI, I2C, UART, and CAN communication interfaces.

  5. Question: Is DSPIC33EP128GP502T-I/SO suitable for digital power supply applications?
    Answer: Yes, DSPIC33EP128GP502T-I/SO is suitable for digital power supply applications with its high-resolution PWM and analog-to-digital converter (ADC) modules.

  6. Question: What development tools are available for programming DSPIC33EP128GP502T-I/SO?
    Answer: Development tools such as MPLAB X IDE and MPLAB XC compilers can be used for programming DSPIC33EP128GP502T-I/SO.

  7. Question: Does DSPIC33EP128GP502T-I/SO support real-time control applications?
    Answer: Yes, DSPIC33EP128GP502T-I/SO supports real-time control applications with its deterministic and low-latency operation.

  8. Question: Can DSPIC33EP128GP502T-I/SO be used in safety-critical applications?
    Answer: Yes, DSPIC33EP128GP502T-I/SO is suitable for safety-critical applications with its comprehensive set of hardware safety features.

  9. Question: What are the available memory options for DSPIC33EP128GP502T-I/SO?
    Answer: DSPIC33EP128GP502T-I/SO offers up to 128 KB of flash memory and 16 KB of RAM.

  10. Question: Is DSPIC33EP128GP502T-I/SO compatible with industrial temperature ranges?
    Answer: Yes, DSPIC33EP128GP502T-I/SO is designed to operate reliably within industrial temperature ranges, making it suitable for industrial applications.