Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
LM2575-5.0YN
詳細を表示 DataSheets

LM2575-5.0YN

Product Overview

Category

The LM2575-5.0YN belongs to the category of voltage regulators.

Use

It is commonly used to regulate and control the output voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 4.75V to 40V
  • Output Voltage: 5.0V
  • Output Current: Up to 1A
  • Efficiency: Up to 92%
  • Switching Frequency: 52 kHz
  • Operating Temperature Range: -40°C to +125°C

Package

The LM2575-5.0YN comes in a TO-220 package, which provides good thermal conductivity and easy mounting on a heat sink.

Essence

The essence of LM2575-5.0YN lies in its ability to efficiently step-down the input voltage to a stable 5.0V output, making it suitable for various applications.

Packaging/Quantity

The LM2575-5.0YN is typically available in tape and reel packaging, with a quantity of 2,500 units per reel.

Specifications

  • Input Voltage Range: 4.75V to 40V
  • Output Voltage: 5.0V
  • Output Current: Up to 1A
  • Dropout Voltage: 1.3V (typical)
  • Line Regulation: ±0.5% (typical)
  • Load Regulation: ±0.5% (typical)
  • Ripple Rejection: 70dB (typical)
  • Quiescent Current: 10mA (typical)

Detailed Pin Configuration

The LM2575-5.0YN has the following pin configuration:

  1. VIN (Pin 1): Input voltage pin.
  2. GND (Pin 2): Ground reference pin.
  3. FB (Pin 3): Feedback pin for setting the output voltage.
  4. SW (Pin 4): Switching pin connected to the inductor and diode.

Functional Features

  • Wide input voltage range allows for versatile applications.
  • High efficiency ensures minimal power loss.
  • Internal thermal shutdown and current limit protection.
  • Adjustable output voltage using external resistors.
  • Soft-start function reduces inrush current during startup.

Advantages and Disadvantages

Advantages

  • Efficient voltage regulation.
  • Wide input voltage range.
  • Thermal shutdown and current limit protection.
  • Adjustable output voltage.
  • Soft-start function.

Disadvantages

  • Requires external components for operation.
  • Higher cost compared to linear regulators.
  • Sensitive to noise on the input voltage.

Working Principles

The LM2575-5.0YN is a step-down switching regulator that uses a pulse-width modulation (PWM) control scheme. It operates by rapidly switching an internal power transistor on and off to regulate the output voltage. The feedback pin (FB) is used to set the desired output voltage, which is compared to an internal reference voltage. The duty cycle of the switching signal is adjusted accordingly to maintain a stable output voltage.

Detailed Application Field Plans

The LM2575-5.0YN finds applications in various fields, including:

  1. Power supplies for microcontrollers and digital circuits.
  2. Battery charging circuits.
  3. Automotive electronics.
  4. Industrial control systems.
  5. LED lighting applications.
  6. Portable electronic devices.

Detailed and Complete Alternative Models

Some alternative models to LM2575-5.0YN include:

  1. LM2596-5.0: Similar specifications with adjustable output voltage.
  2. LM2576-5.0: Higher output current capability.
  3. LM317: Linear regulator with adjustable output voltage.
  4. LT1370: Higher switching frequency and wider input voltage range.

These alternative models offer different features and specifications, allowing users to choose the most suitable option for their specific application.

Word count: 529 words

技術ソリューションにおける LM2575-5.0YN の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of LM2575-5.0YN:

  1. Q: What is LM2575-5.0YN? A: LM2575-5.0YN is a step-down voltage regulator IC that provides a fixed 5V output from a higher input voltage.

  2. Q: What is the maximum input voltage for LM2575-5.0YN? A: The maximum input voltage for LM2575-5.0YN is 40V.

  3. Q: What is the typical output current capability of LM2575-5.0YN? A: The typical output current capability of LM2575-5.0YN is 1A.

  4. Q: How do I calculate the required input capacitor value for LM2575-5.0YN? A: The input capacitor value can be calculated using the formula Cin = (Iout * D) / (ΔV * f), where I_out is the output current, D is the duty cycle, ΔV is the input voltage ripple, and f is the switching frequency.

  5. Q: Can LM2575-5.0YN operate with an input voltage lower than 5V? A: No, LM2575-5.0YN requires an input voltage higher than 5V to regulate it down to a fixed 5V output.

  6. Q: Is LM2575-5.0YN suitable for battery-powered applications? A: Yes, LM2575-5.0YN can be used in battery-powered applications as long as the input voltage is within its specified range.

  7. Q: How do I calculate the power dissipation in LM2575-5.0YN? A: The power dissipation can be calculated using the formula Pdiss = (Vin - Vout) * Iout, where Vin is the input voltage, Vout is the output voltage, and I_out is the output current.

  8. Q: Can LM2575-5.0YN provide a variable output voltage? A: No, LM2575-5.0YN provides a fixed 5V output and does not have the capability to vary the output voltage.

  9. Q: What is the typical efficiency of LM2575-5.0YN? A: The typical efficiency of LM2575-5.0YN is around 85-90%, depending on the input and output voltage conditions.

  10. Q: Are there any recommended external components for LM2575-5.0YN? A: Yes, some recommended external components include an input capacitor, an output capacitor, and an inductor for energy storage and filtering purposes.

Please note that these answers are general and may vary based on specific application requirements and design considerations. It's always recommended to refer to the LM2575-5.0YN datasheet and consult with the manufacturer or technical support for detailed information.