MCP1700T-3602E/TT

Product Overview

Category

The MCP1700T-3602E/TT belongs to the category of voltage regulators.

Use

It is primarily used to regulate voltage in electronic circuits.

Characteristics

• Low dropout voltage
• Low quiescent current
• High output voltage accuracy
• Thermal shutdown protection
• Short-circuit current limiting

Package

The MCP1700T-3602E/TT comes in a small SOT-23 package.

Essence

This voltage regulator is designed to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

The MCP1700T-3602E/TT is typically packaged in reels, with each reel containing a specific quantity of units. The exact quantity may vary depending on the manufacturer.

Specifications

• Input Voltage Range: 2.7V to 16V
• Output Voltage: 3.6V
• Dropout Voltage: 178mV (typical) at 250mA load
• Quiescent Current: 2µA (typical)
• Maximum Output Current: 250mA
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MCP1700T-3602E/TT has three pins:

1. VIN (Input Voltage): This pin is connected to the input voltage source.
2. VOUT (Output Voltage): This pin provides the regulated output voltage.
3. GND (Ground): This pin is connected to the ground reference.

Functional Features

• Low Dropout Voltage: The MCP1700T-3602E/TT exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
• Low Quiescent Current: With a low quiescent current, this voltage regulator minimizes power consumption when the load is light.
• High Output Voltage Accuracy: The device provides high accuracy in maintaining the desired output voltage, ensuring stable performance of connected electronic components.
• Thermal Shutdown Protection: In case of excessive temperature, the MCP1700T-3602E/TT includes a built-in thermal shutdown feature to protect itself from damage.
• Short-Circuit Current Limiting: The voltage regulator incorporates short-circuit current limiting to prevent excessive current flow during a short circuit event.

Advantages and Disadvantages

Advantages

• Efficient voltage regulation
• Low power consumption
• Accurate output voltage
• Built-in thermal protection
• Short-circuit current limiting for added safety

Disadvantages

• Limited maximum output current (250mA)
• Restricted input voltage range (2.7V to 16V)

Working Principles

The MCP1700T-3602E/TT operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This allows it to maintain a constant output voltage despite variations in the input voltage or load conditions.

Detailed Application Field Plans

The MCP1700T-3602E/TT finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

1. MCP1700T-3302E/TT: Similar to the MCP1700T-3602E/TT, but with an output voltage of 3.3V.
2. MCP1700T-5002E/TT: Similar to the MCP1700T-3602E/TT, but with an output voltage of 5V.
3. MCP1700T-1802E/TT: Similar to the MCP1700T-3602E/TT, but with an output voltage of 1.8V.

These alternative models provide different output voltage options to suit specific application requirements.

In conclusion, the MCP1700T-3602E/TT is a voltage regulator that offers efficient and accurate voltage regulation for various electronic devices. With its low dropout voltage, low quiescent current, and thermal shutdown protection, it ensures stable performance and reliability. However, it has limitations in terms of maximum output current and input voltage range. Nonetheless, it serves as a crucial component in numerous applications across different industries.