Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MCP1701T-1802I/CB
詳細を表示 DataSheets

MCP1701T-1802I/CB

Introduction

The MCP1701T-1802I/CB is a voltage regulator belonging to the category of integrated circuits. It is commonly used in electronic devices to regulate voltage and ensure stable power supply to sensitive components.

Basic Information Overview

  • Category: Integrated Circuit
  • Use: Voltage Regulation
  • Characteristics: Low dropout, low quiescent current
  • Package: SOT-23
  • Essence: Regulating voltage for stable power supply
  • Packaging/Quantity: Tape & Reel (3000 units)

Specifications

  • Input Voltage Range: 2.3V to 6.0V
  • Output Voltage: 1.8V
  • Maximum Output Current: 250mA
  • Dropout Voltage: 525mV at 250mA
  • Quiescent Current: 2.0µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

The MCP1701T-1802I/CB features a standard SOT-23 package with three pins: 1. Vin (Input Voltage) 2. Vout (Output Voltage) 3. GND (Ground)

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit current foldback

Advantages and Disadvantages

Advantages: - Stable output voltage - Low power consumption - Small form factor

Disadvantages: - Limited maximum output current - Sensitive to input voltage fluctuations

Working Principles

The MCP1701T-1802I/CB operates by comparing the reference voltage with the feedback voltage to adjust the output voltage. It utilizes a series pass transistor to regulate the output voltage and maintain stability under varying load conditions.

Detailed Application Field Plans

This voltage regulator is widely used in portable electronic devices such as mobile phones, digital cameras, and handheld instruments. It is also employed in battery-powered applications where efficient power management is crucial.

Detailed and Complete Alternative Models

  • MCP1700T-1802E/MB
  • MCP1702T-1802E/CB
  • MCP1703T-1802E/CB
  • MCP1703T-1802E/DB

In conclusion, the MCP1701T-1802I/CB is a reliable voltage regulator with low dropout and quiescent current, making it suitable for various portable and battery-powered electronic devices.

Word Count: 306

技術ソリューションにおける MCP1701T-1802I/CB の適用に関連する 10 件の一般的な質問と回答をリストします。

  1. Question: What is the input voltage range for MCP1701T-1802I/CB?
    Answer: The input voltage range for MCP1701T-1802I/CB is 2.3V to 6.0V.

  2. Question: What is the output voltage of MCP1701T-1802I/CB?
    Answer: The output voltage of MCP1701T-1802I/CB is fixed at 1.8V.

  3. Question: What is the maximum output current of MCP1701T-1802I/CB?
    Answer: The maximum output current of MCP1701T-1802I/CB is 250mA.

  4. Question: Is MCP1701T-1802I/CB suitable for battery-powered applications?
    Answer: Yes, MCP1701T-1802I/CB is suitable for battery-powered applications due to its low quiescent current.

  5. Question: Can MCP1701T-1802I/CB be used in automotive electronics?
    Answer: Yes, MCP1701T-1802I/CB is suitable for automotive electronics applications.

  6. Question: Does MCP1701T-1802I/CB require an external capacitor for stability?
    Answer: Yes, MCP1701T-1802I/CB requires an external 1μF ceramic capacitor for stability.

  7. Question: What is the dropout voltage of MCP1701T-1802I/CB?
    Answer: The dropout voltage of MCP1701T-1802I/CB is typically 178mV at 100mA load.

  8. Question: Is MCP1701T-1802I/CB available in a SOT-23 package?
    Answer: Yes, MCP1701T-1802I/CB is available in a SOT-23 package.

  9. Question: Can MCP1701T-1802I/CB tolerate reverse input voltage?
    Answer: No, MCP1701T-1802I/CB cannot tolerate reverse input voltage.

  10. Question: What are the typical applications for MCP1701T-1802I/CB?
    Answer: Typical applications for MCP1701T-1802I/CB include battery-powered devices, portable equipment, and sensor nodes.