MCP1810T-15I/OT

Product Overview

Category

The MCP1810T-15I/OT belongs to the category of voltage regulators.

Use

This product is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

• High precision: The MCP1810T-15I/OT offers a high level of voltage regulation accuracy.
• Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
• Low quiescent current: The regulator consumes minimal current when in standby mode.
• Thermal shutdown protection: It includes built-in protection against excessive heat.

Package

The MCP1810T-15I/OT comes in a small surface-mount package, which makes it suitable for compact electronic devices.

Essence

The essence of this product lies in its ability to provide stable and reliable voltage regulation, ensuring proper functioning of electronic circuits.

Packaging/Quantity

The MCP1810T-15I/OT is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

• Input Voltage Range: 2.7V to 5.5V
• Output Voltage: 1.5V
• Output Current: Up to 150mA
• Dropout Voltage: 210mV (typical)
• Quiescent Current: 45µA (typical)
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MCP1810T-15I/OT has the following pin configuration:

1. VIN: Input voltage pin
2. GND: Ground pin
3. VOUT: Output voltage pin

Functional Features

• Voltage Regulation: The MCP1810T-15I/OT ensures a stable output voltage regardless of variations in the input voltage.
• Load Regulation: It maintains a consistent output voltage even when the load on the regulator changes.
• Thermal Shutdown Protection: The regulator shuts down automatically if the temperature exceeds a safe limit, preventing damage to the device.

Advantages and Disadvantages

Advantages

• High precision voltage regulation
• Low dropout voltage for efficient operation
• Low quiescent current for power-saving applications
• Thermal shutdown protection for enhanced safety

Disadvantages

• Limited output current capacity (up to 150mA)
• Restricted input voltage range (2.7V to 5.5V)

Working Principles

The MCP1810T-15I/OT operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This is achieved through a combination of active components and passive elements within the regulator.

Detailed Application Field Plans

The MCP1810T-15I/OT finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems - Medical equipment

Detailed and Complete Alternative Models

1. MCP1826S-3302E/DB: Similar voltage regulator with a higher output voltage of 3.3V.
2. MCP1702T-5002E/CB: Alternative regulator with a lower output voltage of 0.5V.
3. MCP1754ST-3302E/DB: Voltage regulator with a higher output current capacity of 500mA.

These alternative models provide options for different voltage and current requirements in various applications.

Word count: 436 words