MIC2169BYMM
Product Overview
- Category: Integrated Circuit (IC)
- Use: Power Management
- Characteristics: High Efficiency, Low Quiescent Current, Wide Input Voltage Range
- Package: 8-Pin MSOP (Mini Small Outline Package)
- Essence: Voltage Regulator
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.7V to 5.5V
- Output Voltage Range: 1.2V to 3.6V
- Output Current: Up to 1A
- Quiescent Current: 35µA (typical)
- Switching Frequency: 1.2MHz (typical)
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
The MIC2169BYMM has the following pin configuration:
- VIN: Input Voltage
- GND: Ground
- FB: Feedback Pin
- EN: Enable Pin
- SW: Switch Node
- PGND: Power Ground
- VOUT: Output Voltage
- LX: Inductor Connection
Functional Features
- High Efficiency: The MIC2169BYMM offers high efficiency power conversion, minimizing energy loss.
- Low Quiescent Current: With a low quiescent current of only 35µA, the IC reduces power consumption during standby or idle modes.
- Wide Input Voltage Range: The device can accept input voltages ranging from 2.7V to 5.5V, making it suitable for various applications.
Advantages and Disadvantages
Advantages
- High efficiency power conversion
- Low quiescent current for reduced power consumption
- Wide input voltage range for versatility
Disadvantages
- Limited output current (up to 1A)
Working Principles
The MIC2169BYMM is a voltage regulator IC that utilizes a synchronous buck converter architecture. It regulates the input voltage to a desired output voltage by controlling the duty cycle of an internal power switch. The device employs pulse-width modulation (PWM) to achieve high efficiency power conversion.
Detailed Application Field Plans
The MIC2169BYMM is commonly used in various applications, including but not limited to:
- Battery-powered devices
- Portable electronics
- IoT (Internet of Things) devices
- Wearable devices
- Embedded systems
Detailed and Complete Alternative Models
Here are some alternative models that can be considered as alternatives to the MIC2169BYMM:
- TPS54331: Texas Instruments
- LT1763: Linear Technology
- LM2576: National Semiconductor
- MAX15062: Maxim Integrated
- ADP2300: Analog Devices
These alternative models offer similar functionality and characteristics to the MIC2169BYMM and can be suitable replacements depending on specific requirements.
Word count: 314 words
技術ソリューションにおける MIC2169BYMM の適用に関連する 10 件の一般的な質問と回答をリストします。
Sure! Here are 10 common questions and answers related to the application of MIC2169BYMM in technical solutions:
Q: What is MIC2169BYMM? A: MIC2169BYMM is a specific model of a high-efficiency, synchronous buck regulator integrated circuit (IC) manufactured by Microchip Technology.
Q: What is the input voltage range of MIC2169BYMM? A: The input voltage range of MIC2169BYMM is typically between 4.5V and 28V.
Q: What is the output voltage range of MIC2169BYMM? A: The output voltage range of MIC2169BYMM can be adjusted from 0.8V to 24V.
Q: What is the maximum output current of MIC2169BYMM? A: MIC2169BYMM can provide a maximum output current of up to 6A.
Q: What is the efficiency of MIC2169BYMM? A: MIC2169BYMM has a high efficiency, typically above 90%, which helps minimize power losses.
Q: Can MIC2169BYMM operate in a wide temperature range? A: Yes, MIC2169BYMM is designed to operate reliably in a wide temperature range, typically from -40°C to +125°C.
Q: Does MIC2169BYMM have built-in protection features? A: Yes, MIC2169BYMM includes various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.
Q: Can MIC2169BYMM be used in battery-powered applications? A: Yes, MIC2169BYMM is suitable for battery-powered applications due to its low quiescent current and ability to operate at low input voltages.
Q: What type of package does MIC2169BYMM come in? A: MIC2169BYMM is available in a small, thermally enhanced 10-pin MSOP package.
Q: What are some typical applications of MIC2169BYMM? A: MIC2169BYMM can be used in various applications such as industrial automation, telecommunications, consumer electronics, and automotive systems where efficient power conversion is required.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.