画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC2177-5.0BWM

MIC2177-5.0BWM

Product Overview

Category

MIC2177-5.0BWM belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 4.5V to 16V
  • Output Voltage: 5.0V
  • Maximum Output Current: 500mA
  • Low Dropout Voltage: 300mV at 500mA
  • Low Quiescent Current: 120µA
  • Thermal Shutdown Protection
  • Short-Circuit Protection
  • Overcurrent Protection

Package

MIC2177-5.0BWM is available in a miniature SOT-23-5 package.

Essence

The essence of MIC2177-5.0BWM lies in its ability to provide a stable and regulated output voltage, even when the input voltage fluctuates.

Packaging/Quantity

MIC2177-5.0BWM is typically packaged in reels containing 3000 units per reel.

Specifications

  • Input Voltage Range: 4.5V to 16V
  • Output Voltage: 5.0V
  • Output Current: Up to 500mA
  • Dropout Voltage: 300mV at 500mA
  • Quiescent Current: 120µA
  • Operating Temperature Range: -40°C to +125°C
  • Package Type: SOT-23-5

Detailed Pin Configuration

MIC2177-5.0BWM has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. VOUT (Output Voltage)

Functional Features

  • Voltage Regulation: MIC2177-5.0BWM ensures a stable output voltage of 5.0V, regardless of input voltage fluctuations.
  • Low Dropout Voltage: With a dropout voltage as low as 300mV at 500mA, it minimizes power dissipation and improves efficiency.
  • Low Quiescent Current: The device consumes only 120µA of current when in standby mode, reducing power consumption.
  • Thermal Shutdown Protection: MIC2177-5.0BWM incorporates thermal shutdown protection to prevent overheating and damage.
  • Short-Circuit Protection: It features built-in short-circuit protection to safeguard the circuit from excessive current flow.
  • Overcurrent Protection: The device is equipped with overcurrent protection to prevent damage due to excessive load currents.

Advantages

  • Compact size and lightweight package make it suitable for space-constrained applications.
  • Wide input voltage range allows for flexibility in various electronic circuits.
  • Low dropout voltage ensures efficient power conversion.
  • Thermal shutdown and short-circuit protection enhance reliability and safety.
  • Easy to integrate into existing circuit designs.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • SOT-23-5 package may require additional heat sinking for certain operating conditions.

Working Principles

MIC2177-5.0BWM operates based on the principle of linear voltage regulation. It utilizes a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage of 5.0V. The device regulates the voltage by controlling the current flow through a pass transistor, compensating for any variations in the input voltage.

Detailed Application Field Plans

MIC2177-5.0BWM finds applications in various fields, including but not limited to:

  1. Battery-powered devices: It can be used to regulate voltage in portable electronics such as smartphones, tablets, and wearable devices.
  2. Automotive electronics: The voltage regulator is suitable for automotive applications, ensuring stable voltage supply to various components.
  3. Industrial control systems: It can be employed in industrial automation and control systems to maintain consistent voltage levels.
  4. IoT devices: MIC2177-5.0BWM is ideal for powering Internet of Things (IoT) devices that require a stable voltage source.

Detailed and Complete Alternative Models

Some alternative models to MIC2177-5.0BWM include:

  1. LM1117-5.0: A popular 5.0V linear voltage regulator with similar specifications.
  2. LT1763-5.0: A low dropout 5.0V voltage regulator suitable for high-performance applications.
  3. TPS73601DBVR: A 5.0V ultra-low quiescent current voltage regulator designed for battery-powered devices.

These alternatives offer similar functionality and can be considered based on specific application requirements.

Word count: 554 words

技術ソリューションにおける MIC2177-5.0BWM の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC2177-5.0BWM in technical solutions:

  1. Q: What is MIC2177-5.0BWM? A: MIC2177-5.0BWM is a specific model of a voltage regulator IC (integrated circuit) manufactured by Microchip Technology.

  2. Q: What is the input voltage range for MIC2177-5.0BWM? A: The input voltage range for MIC2177-5.0BWM is typically between 4.5V and 60V.

  3. Q: What is the output voltage of MIC2177-5.0BWM? A: The output voltage of MIC2177-5.0BWM is fixed at 5.0V.

  4. Q: What is the maximum output current that MIC2177-5.0BWM can handle? A: MIC2177-5.0BWM can handle a maximum output current of up to 500mA.

  5. Q: Can MIC2177-5.0BWM be used in automotive applications? A: Yes, MIC2177-5.0BWM is suitable for automotive applications as it can withstand high voltage transients and has a wide operating temperature range.

  6. Q: Is MIC2177-5.0BWM a low-dropout regulator (LDO)? A: No, MIC2177-5.0BWM is not an LDO. It is a buck (step-down) switching regulator.

  7. Q: What is the efficiency of MIC2177-5.0BWM? A: The efficiency of MIC2177-5.0BWM can reach up to 90% depending on the input and output conditions.

  8. Q: Can MIC2177-5.0BWM be used in battery-powered applications? A: Yes, MIC2177-5.0BWM can be used in battery-powered applications as it has a low quiescent current and supports low-power operation.

  9. Q: Does MIC2177-5.0BWM have built-in protection features? A: Yes, MIC2177-5.0BWM includes built-in protection features such as thermal shutdown, overcurrent protection, and short-circuit protection.

  10. Q: What are some typical applications of MIC2177-5.0BWM? A: Some typical applications of MIC2177-5.0BWM include powering microcontrollers, sensors, and other low-power electronic devices in industrial, automotive, and battery-powered systems.

Please note that these answers are general and may vary depending on the specific requirements and conditions of your technical solution.