Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC2183YM
詳細を表示 DataSheets

MIC2183YM

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High Efficiency, Low Quiescent Current, Wide Input Voltage Range
  • Package: SOIC-8
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 75V
  • Output Voltage Range: 1.25V to 60V
  • Output Current: Up to 2A
  • Quiescent Current: 120µA (typical)
  • Switching Frequency: 500kHz (typical)
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MIC2183YM has a standard SOIC-8 pin configuration:

  1. VIN: Input Voltage
  2. GND: Ground
  3. FB: Feedback Pin
  4. EN: Enable Pin
  5. SW: Switch Node
  6. NC: No Connection
  7. NC: No Connection
  8. VOUT: Output Voltage

Functional Features

  • Wide Input Voltage Range: The MIC2183YM can accept input voltages ranging from 4.5V to 75V, making it suitable for various applications.
  • High Efficiency: With its integrated synchronous rectification, the voltage regulator achieves high efficiency levels, minimizing power losses.
  • Low Quiescent Current: The device has a low quiescent current of only 120µA, reducing power consumption during standby or light load conditions.
  • Adjustable Output Voltage: The output voltage can be adjusted using an external resistor divider connected to the feedback (FB) pin.
  • Protection Features: The MIC2183YM includes built-in protection features such as over-temperature, over-current, and under-voltage lockout.

Advantages and Disadvantages

Advantages

  • High efficiency operation
  • Wide input voltage range
  • Low quiescent current
  • Adjustable output voltage
  • Integrated protection features

Disadvantages

  • Limited output current (up to 2A)
  • Requires external components for proper operation

Working Principles

The MIC2183YM is a voltage regulator that utilizes a synchronous buck topology. It operates by converting the input voltage to a lower regulated output voltage using high-frequency switching. The integrated control circuitry ensures stable and accurate output voltage regulation. The device employs pulse-width modulation (PWM) techniques to achieve high efficiency and minimize power losses.

Detailed Application Field Plans

The MIC2183YM is commonly used in various applications, including:

  1. Industrial Power Supplies: The wide input voltage range and high efficiency make it suitable for industrial power supply applications.
  2. Automotive Electronics: The device's robust design and wide operating temperature range make it ideal for automotive electronics, such as infotainment systems and lighting controls.
  3. Telecommunications: The voltage regulator can be used in telecommunications equipment, providing stable power for network infrastructure devices.
  4. Consumer Electronics: From smart home devices to portable gadgets, the MIC2183YM finds application in a wide range of consumer electronic products.

Detailed and Complete Alternative Models

  1. LM2576-ADJ: Adjustable Output Voltage, 3A Switching Regulator
  2. LT1763-5: Fixed Output Voltage, Low Dropout Linear Regulator
  3. TPS54331: Synchronous Buck Converter, 3.5A Output Current
  4. MAX15062: High-Efficiency Step-Down Converter, 2.5A Output Current

These alternative models offer similar functionality and can be considered as alternatives to the MIC2183YM based on specific application requirements.

Word count: 446 words

技術ソリューションにおける MIC2183YM の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC2183YM in technical solutions:

  1. Q: What is MIC2183YM? A: MIC2183YM is a synchronous buck regulator IC (integrated circuit) that converts a higher input voltage to a lower output voltage efficiently.

  2. Q: What is the input voltage range for MIC2183YM? A: The input voltage range for MIC2183YM is typically between 4.5V and 75V.

  3. Q: What is the output voltage range for MIC2183YM? A: The output voltage range for MIC2183YM can be adjusted from 0.8V to 60V, depending on the specific design requirements.

  4. Q: What is the maximum output current of MIC2183YM? A: The maximum output current of MIC2183YM depends on the specific design and external components used. It can typically handle currents up to several amps.

  5. Q: Can MIC2183YM operate in a wide temperature range? A: Yes, MIC2183YM is designed to operate in a wide temperature range, typically from -40°C to +125°C.

  6. Q: Does MIC2183YM have built-in protection features? A: Yes, MIC2183YM includes various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.

  7. Q: Can MIC2183YM be used in battery-powered applications? A: Yes, MIC2183YM can be used in battery-powered applications as it supports a wide input voltage range and has low quiescent current.

  8. Q: Is MIC2183YM suitable for automotive applications? A: Yes, MIC2183YM is suitable for automotive applications as it meets the necessary automotive standards and can handle the voltage fluctuations in a vehicle's electrical system.

  9. Q: Can MIC2183YM be used in high-frequency switching applications? A: Yes, MIC2183YM is designed for high-frequency operation, typically up to several hundred kilohertz, making it suitable for various switching applications.

  10. Q: What are some typical applications of MIC2183YM? A: Some typical applications of MIC2183YM include power supplies for industrial equipment, telecommunications systems, automotive electronics, and LED lighting.

Please note that these answers are general and may vary depending on the specific design requirements and application scenarios.