Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC2186YM
詳細を表示 DataSheets

MIC2186YM

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High Efficiency, Low Power Consumption
  • Package: SOIC (Small Outline Integrated Circuit)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage Range: 1.25V to 26V
  • Output Current: Up to 2A
  • Quiescent Current: 120µA
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MIC2186YM has a total of 8 pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. COMP: Compensation pin for stability control
  5. EN: Enable pin for turning the regulator on/off
  6. SS/TR: Soft-start/Tracking pin for controlling startup behavior
  7. VCC: Supply voltage pin for internal circuitry
  8. SW: Switch pin for connecting the inductor and output capacitor

Functional Features

  • Wide input voltage range allows for versatile applications
  • High efficiency ensures minimal power loss
  • Low quiescent current enables energy-saving operation
  • Adjustable output voltage provides flexibility
  • Overcurrent protection safeguards against excessive load
  • Thermal shutdown protection prevents overheating

Advantages and Disadvantages

Advantages: - High efficiency leads to reduced power consumption - Wide input voltage range accommodates various power sources - Adjustable output voltage suits different requirements - Overcurrent and thermal protection enhance reliability

Disadvantages: - Limited output current may restrict high-power applications - Requires external components for proper operation

Working Principles

The MIC2186YM is a voltage regulator that utilizes a buck topology to step down the input voltage and provide a regulated output voltage. It employs pulse-width modulation (PWM) to control the duty cycle of the switching transistor, which in turn regulates the output voltage. The feedback mechanism compares the output voltage with a reference voltage and adjusts the duty cycle accordingly to maintain the desired output voltage.

Detailed Application Field Plans

The MIC2186YM is commonly used in various applications, including but not limited to: - Power supplies for industrial equipment - Automotive electronics - Telecommunications systems - Consumer electronics - LED lighting

Detailed and Complete Alternative Models

  1. LM2576-ADJ: Adjustable Voltage Regulator, 3A Output Current
  2. LT1084: Adjustable Linear Regulator, 5A Output Current
  3. TPS5430: Synchronous Buck Converter, 3A Output Current
  4. MAX15062: High-Efficiency Step-Down Converter, 2A Output Current
  5. ADP2303: Adjustable Step-Down DC-DC Converter, 3A Output Current

These alternative models offer similar functionality and can be considered as substitutes for the MIC2186YM in various applications.

Word count: 342 words

技術ソリューションにおける MIC2186YM の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC2186YM in technical solutions:

  1. Q: What is MIC2186YM? A: MIC2186YM is a high-side MOSFET driver IC designed for driving N-channel enhancement-mode MOSFETs in various applications.

  2. Q: What is the maximum voltage rating of MIC2186YM? A: The maximum voltage rating of MIC2186YM is typically around 40V.

  3. Q: Can MIC2186YM be used with both low-side and high-side MOSFETs? A: No, MIC2186YM is specifically designed for driving high-side MOSFETs only.

  4. Q: What is the maximum output current capability of MIC2186YM? A: MIC2186YM can typically provide an output current of up to 1.5A.

  5. Q: Is MIC2186YM suitable for automotive applications? A: Yes, MIC2186YM is automotive-grade and can be used in automotive applications.

  6. Q: Does MIC2186YM have built-in protection features? A: Yes, MIC2186YM includes features like thermal shutdown, undervoltage lockout, and overcurrent protection.

  7. Q: Can MIC2186YM operate at high temperatures? A: Yes, MIC2186YM has a wide operating temperature range of -40°C to +125°C.

  8. Q: What is the input voltage range for MIC2186YM? A: The input voltage range for MIC2186YM is typically between 4.5V and 16V.

  9. Q: Can MIC2186YM be used in PWM (Pulse Width Modulation) applications? A: Yes, MIC2186YM is suitable for PWM applications and can handle high-frequency switching.

  10. Q: What are some typical applications of MIC2186YM? A: MIC2186YM is commonly used in applications such as motor control, power supplies, solenoid drivers, and automotive systems.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.