Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC2202YMM
詳細を表示 DataSheets

MIC2202YMM

Product Overview

Category

MIC2202YMM belongs to the category of integrated circuits (ICs).

Use

The MIC2202YMM is commonly used as a voltage regulator in various electronic devices.

Characteristics

  • Voltage regulation capability
  • Compact package size
  • Low power consumption
  • Wide input voltage range
  • High efficiency

Package

MIC2202YMM is available in a miniature 8-pin MSOP package.

Essence

The essence of MIC2202YMM lies in its ability to regulate voltage efficiently and reliably.

Packaging/Quantity

MIC2202YMM is typically packaged in reels, with each reel containing a specified quantity of ICs.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 1.2V to 3.6V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 45µA
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

MIC2202YMM features the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin
  6. SW: Switching pin
  7. PG: Power good indicator pin
  8. NC: No connection pin

Functional Features

  • Voltage regulation: MIC2202YMM ensures a stable output voltage within the specified range.
  • Enable control: The EN pin allows for easy on/off control of the voltage regulator.
  • Power good indicator: The PG pin provides an indication of the output voltage status.
  • Overcurrent protection: MIC2202YMM incorporates overcurrent protection to safeguard the circuit.

Advantages and Disadvantages

Advantages

  • Compact size enables integration into space-constrained designs.
  • Wide input voltage range allows for compatibility with various power sources.
  • Low power consumption contributes to energy efficiency.
  • High efficiency minimizes power loss during voltage regulation.

Disadvantages

  • Limited maximum output current may not be suitable for high-power applications.
  • Dropout voltage of 200mV may affect performance in low-voltage scenarios.

Working Principles

MIC2202YMM operates based on a switching regulator topology. It utilizes an internal control loop to maintain the desired output voltage by adjusting the duty cycle of the internal switch. This ensures efficient voltage regulation across varying input and output conditions.

Detailed Application Field Plans

MIC2202YMM finds application in a wide range of electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC2202YMM include: - MIC2203YMM - MIC2204YMM - MIC2205YMM - MIC2206YMM

These models share comparable specifications and pin configurations, providing flexibility in design choices.

Word count: 389 words

技術ソリューションにおける MIC2202YMM の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC2202YMM in technical solutions:

  1. Q: What is MIC2202YMM? A: MIC2202YMM is a voltage regulator IC (integrated circuit) that provides a regulated output voltage from an input voltage source.

  2. Q: What is the input voltage range for MIC2202YMM? A: The input voltage range for MIC2202YMM is typically between 2.7V and 5.5V.

  3. Q: What is the output voltage range for MIC2202YMM? A: The output voltage range for MIC2202YMM can be adjusted using external resistors, but it is commonly used to provide a fixed output voltage of 3.3V or 5V.

  4. Q: What is the maximum output current of MIC2202YMM? A: The maximum output current of MIC2202YMM is typically around 500mA, but it can vary depending on the specific operating conditions.

  5. Q: Can MIC2202YMM be used in battery-powered applications? A: Yes, MIC2202YMM can be used in battery-powered applications as it has a low dropout voltage and operates efficiently with low input voltages.

  6. Q: Is MIC2202YMM suitable for automotive applications? A: Yes, MIC2202YMM is suitable for automotive applications as it can withstand high temperatures and has built-in protection features like over-temperature shutdown and reverse battery protection.

  7. Q: Does MIC2202YMM require any external components for operation? A: Yes, MIC2202YMM requires a few external components such as input and output capacitors for stability and filtering.

  8. Q: Can MIC2202YMM be used in space-constrained designs? A: Yes, MIC2202YMM is available in a small form factor package (e.g., 8-pin MSOP) which makes it suitable for space-constrained designs.

  9. Q: What are the typical applications of MIC2202YMM? A: MIC2202YMM is commonly used in various applications such as portable devices, IoT (Internet of Things) devices, industrial equipment, and automotive electronics.

  10. Q: Are there any evaluation boards or reference designs available for MIC2202YMM? A: Yes, the manufacturer of MIC2202YMM may provide evaluation boards or reference designs that can help users quickly prototype and integrate the IC into their technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of MIC2202YMM.