画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC2211-OFYML-TR

MIC2211-OFYML-TR

Product Overview

Category

MIC2211-OFYML-TR belongs to the category of integrated circuits (ICs).

Use

This product is commonly used in electronic devices for voltage regulation and power management purposes.

Characteristics

  • Voltage regulation capabilities
  • Power management features
  • Compact size
  • Low power consumption
  • High efficiency

Package

MIC2211-OFYML-TR is available in a small outline package (SOP) with a specific pin configuration.

Essence

The essence of this product lies in its ability to regulate voltage and manage power efficiently, making it suitable for various electronic applications.

Packaging/Quantity

MIC2211-OFYML-TR is typically packaged in reels or tubes, containing a specific quantity of units per package.

Specifications

  • Input Voltage Range: 2.7V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Maximum Output Current: 500mA
  • Quiescent Current: 17µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

MIC2211-OFYML-TR has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. SW: Switching pin
  6. VOUT: Output voltage pin

Functional Features

  • Wide input voltage range allows compatibility with various power sources.
  • Efficient voltage regulation ensures stable output voltage under different load conditions.
  • Low quiescent current minimizes power consumption when the device is idle.
  • Enable pin provides control over the device's operation.
  • Feedback pin enables precise voltage regulation by adjusting the feedback loop.
  • Switching pin facilitates the switching operation for efficient power management.

Advantages and Disadvantages

Advantages

  • Compact size makes it suitable for space-constrained applications.
  • High efficiency results in minimal power loss during voltage regulation.
  • Wide input voltage range enhances compatibility with different power sources.
  • Low quiescent current reduces power consumption, prolonging battery life.

Disadvantages

  • Limited maximum output current may not be sufficient for high-power applications.
  • Operating temperature range might restrict usage in extreme temperature conditions.

Working Principles

MIC2211-OFYML-TR operates based on a switching regulator principle. It uses an internal control loop to regulate the output voltage by adjusting the duty cycle of the switching transistor. This allows efficient conversion of the input voltage to the desired output voltage while minimizing power loss.

Detailed Application Field Plans

MIC2211-OFYML-TR finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Wearable devices - IoT devices - Battery-powered devices

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC2211-OFYML-TR include: - MIC2211-GFYML-TR - MIC2211-PFYML-TR - MIC2211-QFYML-TR - MIC2211-UFYML-TR

These models have comparable specifications and pin configurations, providing alternatives for different design requirements.

In conclusion, MIC2211-OFYML-TR is an integrated circuit used for voltage regulation and power management in electronic devices. Its compact size, high efficiency, and wide input voltage range make it suitable for various applications. However, its limited maximum output current and operating temperature range should be considered when selecting this product.

技術ソリューションにおける MIC2211-OFYML-TR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC2211-OFYML-TR in technical solutions:

Q1: What is the MIC2211-OFYML-TR? A1: The MIC2211-OFYML-TR is a voltage regulator IC (integrated circuit) that provides a regulated output voltage for various electronic devices.

Q2: What is the input voltage range of MIC2211-OFYML-TR? A2: The input voltage range of MIC2211-OFYML-TR is typically between 2.7V and 5.5V.

Q3: What is the output voltage range of MIC2211-OFYML-TR? A3: The output voltage range of MIC2211-OFYML-TR can be adjusted from 0.8V to 5.5V using external resistors.

Q4: What is the maximum output current of MIC2211-OFYML-TR? A4: The maximum output current of MIC2211-OFYML-TR is typically 500mA.

Q5: Is MIC2211-OFYML-TR suitable for battery-powered applications? A5: Yes, MIC2211-OFYML-TR is suitable for battery-powered applications due to its low quiescent current and wide input voltage range.

Q6: Does MIC2211-OFYML-TR have built-in thermal shutdown protection? A6: Yes, MIC2211-OFYML-TR has built-in thermal shutdown protection to prevent overheating and damage to the device.

Q7: Can MIC2211-OFYML-TR operate in a wide temperature range? A7: Yes, MIC2211-OFYML-TR can operate in a wide temperature range, typically from -40°C to +125°C.

Q8: Does MIC2211-OFYML-TR require external capacitors for stability? A8: Yes, MIC2211-OFYML-TR requires input and output capacitors for stability and proper operation.

Q9: Can MIC2211-OFYML-TR be used in automotive applications? A9: Yes, MIC2211-OFYML-TR is suitable for automotive applications as it meets the necessary requirements such as AEC-Q100 qualification.

Q10: What package does MIC2211-OFYML-TR come in? A10: MIC2211-OFYML-TR is available in a small 6-pin SOT-23 package, which is commonly used in compact electronic designs.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements of MIC2211-OFYML-TR.