The MIC37151-1.65WR-TR belongs to the category of voltage regulators.
This product is primarily used for regulating voltage in electronic circuits.
The MIC37151-1.65WR-TR is available in a SOT-23-5 package. It is typically sold in reels containing a quantity of 3000 units.
The MIC37151-1.65WR-TR has a total of five pins arranged as follows:
```
| | |____| | | ||__ | | | | |________| ```
Pin Configuration: 1. VIN: Input voltage pin 2. GND: Ground pin 3. EN: Enable pin 4. BYP: Bypass pin 5. VOUT: Output voltage pin
The MIC37151-1.65WR-TR is a linear voltage regulator that operates by comparing the output voltage with an internal reference voltage. It adjusts the resistance between the input and output to maintain a constant output voltage of 1.65V, regardless of changes in the input voltage or load conditions. The enable pin (EN) allows for easy on/off control of the regulator, while the bypass pin (BYP) provides additional noise filtering if required.
The MIC37151-1.65WR-TR finds application in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable audio players - Wearable devices - IoT modules - Embedded systems - Industrial automation equipment - Automotive electronics
For those seeking alternative models with similar specifications and features
Sure! Here are 10 common questions and answers related to the application of MIC37151-1.65WR-TR in technical solutions:
Q1: What is MIC37151-1.65WR-TR? A1: MIC37151-1.65WR-TR is a voltage regulator IC (integrated circuit) manufactured by Microchip Technology. It is designed to provide a regulated output voltage of 1.65V.
Q2: What is the input voltage range for MIC37151-1.65WR-TR? A2: The input voltage range for MIC37151-1.65WR-TR is typically between 2.7V and 5.5V.
Q3: What is the maximum output current of MIC37151-1.65WR-TR? A3: MIC37151-1.65WR-TR can deliver a maximum output current of 1.5A.
Q4: What are the typical applications of MIC37151-1.65WR-TR? A4: MIC37151-1.65WR-TR is commonly used in various technical solutions such as battery-powered devices, portable electronics, and low-power microcontroller systems.
Q5: Does MIC37151-1.65WR-TR require any external components for operation? A5: Yes, MIC37151-1.65WR-TR requires a few external components like input and output capacitors for stability and filtering purposes.
Q6: Can MIC37151-1.65WR-TR operate in a wide temperature range? A6: Yes, MIC37151-1.65WR-TR is designed to operate in a wide temperature range, typically from -40°C to +125°C.
Q7: Is MIC37151-1.65WR-TR a low-dropout regulator (LDO)? A7: Yes, MIC37151-1.65WR-TR is an LDO regulator, which means it can maintain a regulated output voltage even when the input voltage is only slightly higher than the desired output voltage.
Q8: What is the dropout voltage of MIC37151-1.65WR-TR? A8: The dropout voltage of MIC37151-1.65WR-TR is typically around 200mV at full load.
Q9: Can MIC37151-1.65WR-TR handle short-circuit conditions? A9: Yes, MIC37151-1.65WR-TR has built-in protection features to handle short-circuit conditions and prevent damage to the IC.
Q10: Is MIC37151-1.65WR-TR available in different package options? A10: Yes, MIC37151-1.65WR-TR is available in various package options, including SOT-223 and TO-263, providing flexibility for different PCB layouts and thermal requirements.
Please note that these answers are general and may vary depending on the specific datasheet and application requirements.