Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC37502BR
詳細を表示 DataSheets

MIC37502BR

Product Overview

Category

MIC37502BR belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • High efficiency
  • Low dropout voltage
  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent and thermal protection

Package

MIC37502BR comes in a small outline package (SOP) with multiple pins for easy integration into circuit boards.

Essence

The essence of MIC37502BR lies in its ability to provide stable and regulated voltage output, ensuring proper functioning of electronic devices.

Packaging/Quantity

The product is typically packaged in reels or tubes, with each reel or tube containing a specific quantity of MIC37502BR units.

Specifications

  • Input Voltage Range: 2.7V to 16V
  • Output Voltage Range: 0.8V to 5.5V
  • Maximum Output Current: 1.5A
  • Dropout Voltage: 200mV at 1A
  • Quiescent Current: 120µA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

MIC37502BR has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • High Efficiency: The MIC37502BR exhibits high efficiency, minimizing power loss during voltage regulation.
  • Low Dropout Voltage: With a low dropout voltage, the regulator can maintain a stable output even when the input voltage is close to the desired output voltage.
  • Wide Input Voltage Range: The device can accept a wide range of input voltages, making it suitable for various applications.
  • Adjustable Output Voltage: The output voltage can be adjusted within a specified range, providing flexibility for different circuit requirements.
  • Overcurrent and Thermal Protection: MIC37502BR incorporates protection mechanisms to prevent damage from overcurrent and excessive heat.

Advantages and Disadvantages

Advantages

  • High efficiency leads to reduced power consumption.
  • Wide input voltage range allows for versatile applications.
  • Adjustable output voltage provides flexibility in circuit design.
  • Overcurrent and thermal protection ensure device safety.

Disadvantages

  • Dropout voltage may limit the use of low input voltage sources.
  • Limited maximum output current may restrict high-power applications.

Working Principles

MIC37502BR operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the actual output voltage with the desired voltage and adjusts the internal circuitry accordingly to maintain a stable output.

Detailed Application Field Plans

MIC37502BR finds applications in various fields, including but not limited to: 1. Portable electronic devices 2. Battery-powered systems 3. Automotive electronics 4. Industrial control systems 5. Communication equipment

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC37502BR are: 1. LM317: A popular adjustable linear voltage regulator. 2. LT1086: A low dropout positive fixed voltage regulator. 3. TPS7A47: An ultra-low-noise, high-voltage, low-dropout linear regulator.

These alternatives can be considered based on specific application requirements and design constraints.

Word count: 436 words

技術ソリューションにおける MIC37502BR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC37502BR in technical solutions:

  1. Q: What is MIC37502BR? A: MIC37502BR is a voltage regulator IC (integrated circuit) that provides a regulated output voltage for various electronic devices.

  2. Q: What is the input voltage range of MIC37502BR? A: The input voltage range of MIC37502BR is typically between 4.5V and 28V.

  3. Q: What is the output voltage range of MIC37502BR? A: The output voltage range of MIC37502BR can be adjusted from 0.8V to 5.5V using external resistors.

  4. Q: What is the maximum output current of MIC37502BR? A: MIC37502BR can provide a maximum output current of up to 2A, making it suitable for powering a wide range of devices.

  5. Q: Is MIC37502BR suitable for battery-powered applications? A: Yes, MIC37502BR is designed to operate efficiently in battery-powered applications due to its low quiescent current and high efficiency.

  6. Q: Does MIC37502BR have built-in protection features? A: Yes, MIC37502BR includes built-in protection features such as thermal shutdown, overcurrent protection, and short-circuit protection.

  7. Q: Can MIC37502BR operate in a wide temperature range? A: Yes, MIC37502BR is designed to operate reliably in a wide temperature range, typically from -40°C to +125°C.

  8. Q: Can I use MIC37502BR in automotive applications? A: Yes, MIC37502BR is suitable for automotive applications as it meets the necessary requirements for automotive electronics.

  9. Q: Does MIC37502BR require any external components for operation? A: Yes, MIC37502BR requires a few external components such as input and output capacitors to ensure stability and proper operation.

  10. Q: Is there a recommended PCB layout for MIC37502BR? A: Yes, the datasheet of MIC37502BR provides guidelines for the recommended PCB layout to minimize noise and maximize performance.

Please note that these answers are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.