Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC39102BM
詳細を表示 DataSheets

MIC39102BM

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low dropout voltage, high current capability
  • Package: TO-263-5 (D2PAK)
  • Essence: Monolithic integrated circuit
  • Packaging/Quantity: Tape and Reel, 250 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 120mV at 1A
  • Maximum Output Current: 1.5A
  • Line Regulation: 0.05% typical
  • Load Regulation: 0.1% typical
  • Quiescent Current: 120µA typical
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MIC39102BM has a total of five pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage ensures efficient power conversion.
  • High current capability allows for powering various loads.
  • Built-in thermal shutdown protection prevents overheating.
  • Short-circuit current limit protects the device from damage.
  • Fast transient response enables stable output voltage.

Advantages and Disadvantages

Advantages: - Low dropout voltage improves efficiency. - High current capability supports a wide range of applications. - Thermal shutdown protection enhances reliability. - Fast transient response ensures stable output voltage.

Disadvantages: - Limited input voltage range (2.5V to 6.0V). - Dropout voltage may cause power dissipation in certain scenarios.

Working Principles

The MIC39102BM is a monolithic voltage regulator that operates by maintaining a stable output voltage despite variations in input voltage and load conditions. It utilizes a feedback mechanism to continuously adjust the internal pass transistor, ensuring the desired output voltage is maintained. The device also incorporates various protection features to safeguard against overcurrent, overheating, and short-circuits.

Detailed Application Field Plans

The MIC39102BM is commonly used in applications requiring regulated power supply, such as:

  1. Battery-powered devices: Portable electronics, handheld instruments.
  2. Automotive systems: Infotainment systems, lighting modules.
  3. Industrial equipment: Motor control, sensors, actuators.
  4. Communication devices: Wireless routers, network switches.

Detailed and Complete Alternative Models

  1. LM1117-ADJ: Adjustable voltage regulator with similar specifications.
  2. LT1763-3.3: Low dropout voltage regulator with fixed 3.3V output.
  3. TPS7A4700: High-current, low-noise voltage regulator for precision applications.

These alternative models offer comparable performance and can be considered based on specific requirements.

Word count: 314 words

技術ソリューションにおける MIC39102BM の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC39102BM in technical solutions:

  1. Q: What is MIC39102BM? A: MIC39102BM is a low-dropout voltage regulator (LDO) IC that provides a stable output voltage with low quiescent current.

  2. Q: What is the input voltage range for MIC39102BM? A: The input voltage range for MIC39102BM is typically between 2.5V and 16V.

  3. Q: What is the output voltage range for MIC39102BM? A: The output voltage range for MIC39102BM can be adjusted from 1.5V to 5.0V using external resistors.

  4. Q: What is the maximum output current of MIC39102BM? A: MIC39102BM can provide a maximum output current of 1A.

  5. Q: Is MIC39102BM suitable for battery-powered applications? A: Yes, MIC39102BM is suitable for battery-powered applications due to its low quiescent current and low dropout voltage.

  6. Q: Does MIC39102BM have built-in thermal shutdown protection? A: Yes, MIC39102BM has built-in thermal shutdown protection to prevent overheating and damage to the IC.

  7. Q: Can MIC39102BM operate in a wide temperature range? A: Yes, MIC39102BM can operate in a temperature range of -40°C to +125°C.

  8. Q: Does MIC39102BM require any external capacitors for stability? A: Yes, MIC39102BM requires an input capacitor and an output capacitor for stability and proper operation.

  9. Q: Can MIC39102BM handle input voltage fluctuations or transients? A: Yes, MIC39102BM has excellent line and load transient response, making it suitable for applications with input voltage fluctuations.

  10. Q: What are some typical applications of MIC39102BM? A: Some typical applications of MIC39102BM include battery-powered devices, portable electronics, industrial control systems, and automotive electronics.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.