Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC3975BMM
詳細を表示 DataSheets

MIC3975BMM

Product Overview

Category

MIC3975BMM belongs to the category of integrated circuits (ICs).

Use

The MIC3975BMM is commonly used as a voltage regulator in electronic devices.

Characteristics

  • The MIC3975BMM is a low-dropout (LDO) linear voltage regulator.
  • It has a high output voltage accuracy and low dropout voltage.
  • The device operates with a low quiescent current, making it suitable for battery-powered applications.
  • It offers thermal shutdown and current limit protection features.

Package

The MIC3975BMM is available in a miniature 8-pin MSOP package.

Essence

The essence of the MIC3975BMM lies in its ability to regulate and stabilize voltage levels in electronic circuits.

Packaging/Quantity

The MIC3975BMM is typically sold in reels or tubes containing a specified quantity of units. The exact packaging and quantity may vary depending on the supplier.

Specifications

  • Input Voltage Range: 2.7V to 16V
  • Output Voltage Range: 1.2V to 15V
  • Dropout Voltage: 200mV at 150mA
  • Quiescent Current: 75µA
  • Maximum Output Current: 150mA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MIC3975BMM has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin (active high)
  4. BYP: Bypass capacitor pin
  5. FB: Feedback pin
  6. NC: No connection
  7. VOUT: Output voltage pin
  8. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage ensures efficient regulation even when the input voltage is close to the desired output voltage.
  • High output voltage accuracy provides precise voltage regulation for sensitive electronic components.
  • Thermal shutdown protection prevents the device from overheating and damaging itself or the surrounding circuitry.
  • Current limit protection safeguards against excessive current flow, protecting the device and the connected components.

Advantages and Disadvantages

Advantages

  • High output voltage accuracy
  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown and current limit protection features

Disadvantages

  • Maximum output current limited to 150mA
  • Limited input voltage range (2.7V to 16V)

Working Principles

The MIC3975BMM operates as a linear voltage regulator. It takes an input voltage and regulates it to a stable output voltage using a feedback mechanism. The device compares the output voltage with a reference voltage and adjusts its internal circuitry to maintain the desired output voltage level. The low dropout voltage ensures efficient regulation even when the input voltage is close to the desired output voltage.

Detailed Application Field Plans

The MIC3975BMM finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

  1. LM1117: A popular LDO voltage regulator with similar specifications and features.
  2. LT1763: Another LDO voltage regulator known for its high output voltage accuracy and low dropout voltage.
  3. ADP3339: An LDO voltage regulator suitable for low-power applications with a wide input voltage range.

These alternative models offer similar functionality and can be considered as substitutes for the MIC3975BMM depending on specific requirements and availability.

Word count: 520 words

技術ソリューションにおける MIC3975BMM の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC3975BMM in technical solutions:

  1. Q: What is MIC3975BMM? A: MIC3975BMM is a voltage regulator IC (integrated circuit) that provides a regulated output voltage from an input voltage source.

  2. Q: What is the input voltage range for MIC3975BMM? A: The input voltage range for MIC3975BMM is typically between 4.5V and 60V.

  3. Q: What is the output voltage range for MIC3975BMM? A: The output voltage range for MIC3975BMM can be adjusted using external resistors, but it is typically between 1.23V and 37V.

  4. Q: What is the maximum output current of MIC3975BMM? A: MIC3975BMM can provide a maximum output current of up to 1A.

  5. Q: Is MIC3975BMM suitable for battery-powered applications? A: Yes, MIC3975BMM is suitable for battery-powered applications as it has low quiescent current and supports low dropout voltage operation.

  6. Q: Can MIC3975BMM handle high input voltages? A: Yes, MIC3975BMM can handle high input voltages up to 60V, making it suitable for various industrial and automotive applications.

  7. Q: Does MIC3975BMM have built-in thermal protection? A: Yes, MIC3975BMM has built-in thermal shutdown protection that prevents the IC from overheating under excessive load or high ambient temperatures.

  8. Q: Can MIC3975BMM operate in a wide temperature range? A: Yes, MIC3975BMM can operate in a wide temperature range, typically from -40°C to +125°C.

  9. Q: Does MIC3975BMM require any external components for operation? A: Yes, MIC3975BMM requires a few external components such as input and output capacitors, resistors for voltage adjustment, and optional diodes for protection.

  10. Q: What are some typical applications of MIC3975BMM? A: MIC3975BMM is commonly used in various technical solutions such as power supplies, battery chargers, automotive electronics, industrial control systems, and LED lighting applications.

Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.