Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC4682YM
詳細を表示 DataSheets

MIC4682YM

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low dropout voltage, high output current capability
  • Package: SOIC-8
  • Essence: Efficient power management solution
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.5V to 16V
  • Output Voltage Range: 1.25V to 15V
  • Dropout Voltage: 300mV at 500mA
  • Output Current: Up to 1A
  • Quiescent Current: 120µA
  • Line Regulation: 0.05% typical
  • Load Regulation: 0.1% typical
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MIC4682YM is an 8-pin IC with the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. NC: No connection
  5. VOUT: Output voltage pin
  6. NC: No connection
  7. NC: No connection
  8. VREF: Reference voltage pin

Functional Features

  • Low dropout voltage ensures efficient power conversion even with low input voltages.
  • High output current capability allows for powering a wide range of devices.
  • Enable pin provides control over the regulator's operation.
  • Reference voltage pin enables precise output voltage regulation.

Advantages and Disadvantages

Advantages: - Low dropout voltage improves efficiency. - High output current capability allows for versatile applications. - Enable pin offers flexibility in controlling the regulator. - Reference voltage pin ensures accurate output voltage regulation.

Disadvantages: - Limited number of pins may restrict additional functionalities. - Requires external components for proper operation.

Working Principles

The MIC4682YM is a voltage regulator that operates by maintaining a constant output voltage regardless of variations in the input voltage or load conditions. It achieves this through a feedback mechanism that compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly. The low dropout voltage ensures efficient power conversion, while the high output current capability allows for powering various devices.

Detailed Application Field Plans

The MIC4682YM can be used in a wide range of applications, including but not limited to: - Battery-powered devices - Portable electronics - Automotive systems - Industrial equipment - Communication devices

Detailed and Complete Alternative Models

  1. LM1117: Low dropout voltage regulator with adjustable output voltage.
  2. LT1084: High current, low dropout voltage linear regulator.
  3. TPS7A47: Ultra-low noise, high PSRR voltage regulator.
  4. MAX603: Low quiescent current, low dropout voltage regulator.

These alternative models offer similar functionalities and can be considered as substitutes for the MIC4682YM depending on specific requirements.

Word count: 305 words

技術ソリューションにおける MIC4682YM の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC4682YM in technical solutions:

  1. Q: What is MIC4682YM? A: MIC4682YM is a voltage regulator IC (integrated circuit) that provides a regulated output voltage for various electronic applications.

  2. Q: What is the input voltage range supported by MIC4682YM? A: MIC4682YM supports an input voltage range of 4.5V to 36V.

  3. Q: What is the output voltage range of MIC4682YM? A: The output voltage range of MIC4682YM is adjustable from 1.25V to 33V.

  4. Q: What is the maximum output current capability of MIC4682YM? A: MIC4682YM can provide a maximum output current of 500mA.

  5. Q: Can MIC4682YM operate in both step-up (boost) and step-down (buck) configurations? A: No, MIC4682YM is specifically designed for step-down (buck) voltage regulation applications.

  6. Q: Does MIC4682YM have built-in overcurrent protection? A: Yes, MIC4682YM features built-in overcurrent protection to safeguard against excessive load currents.

  7. Q: Is MIC4682YM suitable for battery-powered applications? A: Yes, MIC4682YM is well-suited for battery-powered applications due to its low quiescent current and high efficiency.

  8. Q: Can MIC4682YM handle high input voltages without additional components? A: Yes, MIC4682YM can handle high input voltages up to 36V without requiring any external components.

  9. Q: Does MIC4682YM have thermal shutdown protection? A: Yes, MIC4682YM incorporates thermal shutdown protection to prevent overheating and damage to the IC.

  10. Q: What are some typical applications of MIC4682YM? A: MIC4682YM is commonly used in various applications such as industrial control systems, automotive electronics, power supplies, and portable devices.

Please note that these answers are general and may vary depending on specific design considerations and requirements.