Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC49150BMM
詳細を表示 DataSheets

MIC49150BMM

Product Overview

Category

MIC49150BMM belongs to the category of integrated circuits (ICs).

Use

The MIC49150BMM is commonly used as a voltage regulator in various electronic devices.

Characteristics

  • Input Voltage Range: 4.5V to 75V
  • Output Voltage Range: 1.23V to 60V
  • Maximum Output Current: 1.5A
  • Low Dropout Voltage: 300mV at 1A
  • Adjustable Output Voltage
  • Thermal Shutdown Protection
  • Short Circuit Protection

Package

MIC49150BMM is available in a miniature 8-pin MSOP package.

Essence

The essence of MIC49150BMM lies in its ability to regulate voltage efficiently and reliably, ensuring stable power supply for electronic devices.

Packaging/Quantity

MIC49150BMM is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 4.5V to 75V
  • Output Voltage Range: 1.23V to 60V
  • Maximum Output Current: 1.5A
  • Dropout Voltage: 300mV at 1A
  • Line Regulation: ±0.02% typical
  • Load Regulation: ±0.2% typical
  • Quiescent Current: 10mA typical
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

MIC49150BMM features an 8-pin MSOP package with the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. FB: Feedback pin for output voltage regulation
  4. EN: Enable pin for turning the regulator on/off
  5. VOUT: Output voltage pin
  6. NC: No connection
  7. NC: No connection
  8. VIN: Input voltage pin

Functional Features

  • Wide input voltage range allows for versatile applications.
  • Adjustable output voltage provides flexibility in meeting specific requirements.
  • Low dropout voltage ensures efficient power conversion.
  • Thermal shutdown protection prevents overheating and damage.
  • Short circuit protection safeguards the regulator and connected devices.

Advantages and Disadvantages

Advantages

  • Wide input voltage range enables compatibility with various power sources.
  • Adjustable output voltage allows for customization.
  • Efficient power conversion with low dropout voltage.
  • Protection features enhance reliability and safety.

Disadvantages

  • Limited maximum output current of 1.5A may not be suitable for high-power applications.
  • The MSOP package may require specialized handling during assembly.

Working Principles

MIC49150BMM operates as a linear voltage regulator. It regulates the output voltage by comparing it to a reference voltage and adjusting the pass transistor accordingly. The feedback pin (FB) is used to monitor the output voltage, while the enable pin (EN) controls the on/off state of the regulator.

Detailed Application Field Plans

MIC49150BMM finds applications in various electronic devices, including but not limited to: - Power supplies - Industrial equipment - Automotive systems - Telecommunications devices - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC49150BMM include: - LM317 - LT1083 - LM1117 - TPS7A4700

These models can be considered based on specific requirements and compatibility with the application.

Word count: 511 words

技術ソリューションにおける MIC49150BMM の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC49150BMM in technical solutions:

  1. Q: What is MIC49150BMM? A: MIC49150BMM is a high-side MOSFET driver IC designed for driving N-channel enhancement-mode MOSFETs in various applications.

  2. Q: What is the maximum voltage rating of MIC49150BMM? A: The maximum voltage rating of MIC49150BMM is typically 80V.

  3. Q: What is the maximum output current capability of MIC49150BMM? A: MIC49150BMM can provide a maximum output current of up to 4A.

  4. Q: Can MIC49150BMM be used with both low-side and high-side MOSFETs? A: Yes, MIC49150BMM can be used with both low-side and high-side MOSFETs depending on the application requirements.

  5. Q: What is the input voltage range of MIC49150BMM? A: The input voltage range of MIC49150BMM is typically between 4.5V and 16V.

  6. Q: Does MIC49150BMM have built-in protection features? A: Yes, MIC49150BMM includes built-in protection features such as thermal shutdown, under-voltage lockout, and over-current protection.

  7. Q: Can MIC49150BMM operate in a wide temperature range? A: Yes, MIC49150BMM is designed to operate in a wide temperature range, typically from -40°C to +125°C.

  8. Q: What is the typical propagation delay of MIC49150BMM? A: The typical propagation delay of MIC49150BMM is around 30ns.

  9. Q: Can MIC49150BMM be used in automotive applications? A: Yes, MIC49150BMM is suitable for automotive applications as it meets the necessary automotive standards and requirements.

  10. Q: What are some typical applications of MIC49150BMM? A: Some typical applications of MIC49150BMM include motor control, power distribution, LED lighting, solenoid drivers, and general-purpose high-side switching.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application guidelines provided by the manufacturer.