Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC5200-4.8YM-TR
詳細を表示 DataSheets

MIC5200-4.8YM-TR

Product Overview

Category

MIC5200-4.8YM-TR belongs to the category of voltage regulators.

Use

This product is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Low dropout voltage
  • Low quiescent current
  • High output voltage accuracy
  • Thermal shutdown protection
  • Short-circuit current limit

Package

MIC5200-4.8YM-TR comes in a small outline package (SOT-23) which is suitable for surface mount applications.

Essence

The essence of MIC5200-4.8YM-TR lies in its ability to provide stable and regulated voltage output, ensuring reliable performance of electronic devices.

Packaging/Quantity

This product is typically packaged in reels or tape and reel format, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V to 16V
  • Output Voltage: 4.8V
  • Dropout Voltage: 150mV at 100mA
  • Quiescent Current: 35µA
  • Output Current: Up to 200mA
  • Line Regulation: 0.05%/V
  • Load Regulation: 0.1%/mA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

MIC5200-4.8YM-TR has three pins:

  1. VIN (Pin 1): Input voltage pin.
  2. GND (Pin 2): Ground reference pin.
  3. VOUT (Pin 3): Regulated output voltage pin.

Functional Features

  • Low dropout voltage ensures efficient power conversion even when the input voltage is close to the desired output voltage.
  • Low quiescent current minimizes power consumption during standby or idle conditions.
  • High output voltage accuracy provides precise voltage regulation for sensitive electronic components.
  • Thermal shutdown protection prevents the device from overheating and ensures its longevity.
  • Short-circuit current limit protects the device and the connected circuitry from excessive current flow during a short-circuit condition.

Advantages and Disadvantages

Advantages

  • Reliable voltage regulation
  • Low power consumption
  • Compact package size
  • Wide operating temperature range

Disadvantages

  • Limited output current capacity (up to 200mA)
  • Not suitable for high-power applications

Working Principles

MIC5200-4.8YM-TR operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. This allows it to maintain a stable output voltage even when the input voltage fluctuates.

Detailed Application Field Plans

MIC5200-4.8YM-TR finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to MIC5200-4.8YM-TR include: - LM1117-4.8 - LT1763-4.8 - MCP1702-4.8

These alternatives can be considered based on specific requirements and design constraints.

Word count: 410 words

技術ソリューションにおける MIC5200-4.8YM-TR の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC5200-4.8YM-TR in technical solutions:

  1. Q: What is MIC5200-4.8YM-TR? A: MIC5200-4.8YM-TR is a low dropout voltage regulator IC that provides a stable output voltage of 4.8V.

  2. Q: What is the input voltage range for MIC5200-4.8YM-TR? A: The input voltage range for MIC5200-4.8YM-TR is typically between 2.5V and 16V.

  3. Q: What is the maximum output current of MIC5200-4.8YM-TR? A: The maximum output current of MIC5200-4.8YM-TR is 150mA.

  4. Q: Can MIC5200-4.8YM-TR be used in battery-powered applications? A: Yes, MIC5200-4.8YM-TR can be used in battery-powered applications as it has a low dropout voltage and low quiescent current.

  5. Q: Is MIC5200-4.8YM-TR suitable for use in automotive electronics? A: Yes, MIC5200-4.8YM-TR is suitable for use in automotive electronics as it can operate over a wide temperature range and has built-in protection features.

  6. Q: Can I use MIC5200-4.8YM-TR to power microcontrollers and other digital ICs? A: Yes, MIC5200-4.8YM-TR can be used to power microcontrollers and other digital ICs that require a stable 4.8V supply voltage.

  7. Q: Does MIC5200-4.8YM-TR require any external components for operation? A: Yes, MIC5200-4.8YM-TR requires a few external components such as input and output capacitors for stability and filtering.

  8. Q: What is the dropout voltage of MIC5200-4.8YM-TR? A: The dropout voltage of MIC5200-4.8YM-TR is typically around 200mV at full load.

  9. Q: Can I use MIC5200-4.8YM-TR in space-constrained applications? A: Yes, MIC5200-4.8YM-TR comes in a small SOT-23 package, making it suitable for space-constrained applications.

  10. Q: Are there any recommended application circuits or reference designs available for MIC5200-4.8YM-TR? A: Yes, the datasheet of MIC5200-4.8YM-TR provides recommended application circuits and reference designs that can be used as a starting point for implementation.

Please note that these answers are general and may vary depending on specific requirements and conditions. It's always recommended to refer to the datasheet and consult with technical experts for accurate information.