MIC5206BMM

Product Overview

Category

MIC5206BMM belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

• Low dropout voltage
• High output voltage accuracy
• Low quiescent current
• Thermal shutdown protection
• Short-circuit current limit

Package

MIC5206BMM is available in a miniature SOT-23-5 package.

Essence

The essence of MIC5206BMM lies in its ability to provide stable and regulated voltage output for various electronic applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

• Input Voltage Range: 2.3V to 16V
• Output Voltage Range: 1.25V to 15V
• Dropout Voltage: 20mV (typical)
• Quiescent Current: 120µA (typical)
• Output Current: Up to 150mA
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

MIC5206BMM has five pins arranged as follows:

```

---

| | --| |-- |____| ```

Pin 1: Enable (EN) Pin 2: Ground (GND) Pin 3: Output (OUT) Pin 4: Bypass (BP) Pin 5: Input (IN)

Functional Features

• Low Dropout Voltage: The MIC5206BMM exhibits a low dropout voltage, ensuring efficient regulation even when the input voltage is close to the desired output voltage.
• High Output Voltage Accuracy: It provides precise and accurate output voltage levels, making it suitable for applications requiring stable voltage references.
• Low Quiescent Current: The device consumes minimal current when in standby mode, conserving power and extending battery life.
• Thermal Shutdown Protection: MIC5206BMM incorporates thermal shutdown protection, preventing damage due to excessive temperature.
• Short-Circuit Current Limit: It features a built-in short-circuit current limit, safeguarding the device and the connected circuitry from potential damage.

Advantages and Disadvantages

Advantages

• Small form factor
• Wide input voltage range
• High output voltage accuracy
• Low quiescent current consumption
• Thermal shutdown protection
• Short-circuit current limit

Disadvantages

• Limited output current capacity (up to 150mA)

Working Principles

MIC5206BMM operates as a linear voltage regulator. It regulates the output voltage by maintaining a constant voltage drop across its internal pass transistor. This ensures that the output voltage remains stable even when the input voltage fluctuates.

Detailed Application Field Plans

MIC5206BMM finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment - Communication devices

Detailed and Complete Alternative Models

Some alternative models to MIC5206BMM include: - LM1117-3.3 - LT1761ES5-3.3 - LP2985-33DBVR - MAX603CPA

These alternatives offer similar functionality and can be used as substitutes based on specific requirements.

Word count: 366 words