Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC5209-4.2BS
詳細を表示 DataSheets

MIC5209-4.2BS

Product Overview

Category

MIC5209-4.2BS belongs to the category of voltage regulators.

Use

This product is used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

  • Low dropout voltage: The MIC5209-4.2BS has a low dropout voltage, allowing it to operate even when the input voltage is close to the desired output voltage.
  • High accuracy: It provides precise voltage regulation, ensuring stable performance of the connected devices.
  • Low quiescent current: The regulator consumes minimal current when there is no load, making it suitable for battery-powered applications.
  • Thermal shutdown protection: It incorporates thermal shutdown circuitry to prevent damage due to excessive heat.
  • Short-circuit protection: The MIC5209-4.2BS includes short-circuit protection to safeguard against overcurrent conditions.

Package

The MIC5209-4.2BS is available in a small surface-mount SOT-23 package.

Essence

The essence of this product lies in its ability to provide reliable and stable voltage regulation for various electronic applications.

Packaging/Quantity

The MIC5209-4.2BS is typically packaged in reels or tubes, with quantities varying depending on the manufacturer's specifications.

Specifications

  • Input Voltage Range: 2.5V to 16V
  • Output Voltage: 4.2V
  • Dropout Voltage: 120mV (typical)
  • Quiescent Current: 75µA (typical)
  • Maximum Output Current: 150mA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MIC5209-4.2BS features a three-pin configuration:

  1. VIN (Pin 1): Input voltage pin.
  2. GND (Pin 2): Ground reference pin.
  3. VOUT (Pin 3): Output voltage pin.

Functional Features

  • Voltage Regulation: The MIC5209-4.2BS maintains a constant output voltage of 4.2V, regardless of variations in the input voltage or load conditions.
  • Low Dropout: It can operate with a minimal voltage difference between the input and output, ensuring efficient power conversion.
  • Thermal Shutdown Protection: The regulator automatically shuts down if the temperature exceeds a safe threshold, preventing damage to the device.
  • Short-Circuit Protection: In case of a short circuit, the MIC5209-4.2BS limits the current flow to protect both the regulator and the connected circuitry.

Advantages and Disadvantages

Advantages

  • High accuracy and stability in voltage regulation.
  • Low dropout voltage enables operation with low input voltages.
  • Low quiescent current consumption prolongs battery life.
  • Compact SOT-23 package allows for space-saving designs.
  • Built-in thermal and short-circuit protection enhance reliability.

Disadvantages

  • Limited maximum output current of 150mA may not be sufficient for high-power applications.
  • Requires external capacitors for stability, adding complexity to the design.

Working Principles

The MIC5209-4.2BS utilizes a combination of internal circuitry, including a voltage reference, error amplifier, and pass transistor, to regulate the output voltage. When the input voltage is within the specified range, the regulator adjusts the pass transistor to maintain a constant output voltage of 4.2V. The feedback mechanism continuously monitors the output voltage and adjusts the pass transistor accordingly.

Detailed Application Field Plans

The MIC5209-4.2BS finds applications in various electronic systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Detailed and Complete Alternative Models

Some alternative models to the MIC5209-4.2BS include: - LM1117-4.2: A popular voltage regulator with similar specifications and features. - MCP1703-4.2: Another reliable option for voltage regulation. - LT1761-4.2: A high-performance regulator suitable for demanding applications.

These alternatives offer comparable functionality and can be considered based on specific requirements and availability.

Word count: 511 words

技術ソリューションにおける MIC5209-4.2BS の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC5209-4.2BS in technical solutions:

  1. Q: What is MIC5209-4.2BS? A: MIC5209-4.2BS is a voltage regulator IC (integrated circuit) that provides a fixed output voltage of 4.2V.

  2. Q: What are the typical applications of MIC5209-4.2BS? A: MIC5209-4.2BS is commonly used in various electronic devices such as portable devices, battery-powered systems, and low-power microcontrollers.

  3. Q: What is the input voltage range for MIC5209-4.2BS? A: The input voltage range for MIC5209-4.2BS is typically between 2.5V and 16V.

  4. Q: What is the maximum output current of MIC5209-4.2BS? A: The maximum output current of MIC5209-4.2BS is typically 150mA.

  5. Q: Does MIC5209-4.2BS require any external components for operation? A: Yes, MIC5209-4.2BS requires a few external components such as input and output capacitors for stability and filtering.

  6. Q: Can MIC5209-4.2BS handle input voltages higher than 16V? A: No, it is not recommended to exceed the maximum input voltage of 16V as it may damage the IC.

  7. Q: Is MIC5209-4.2BS suitable for low-power applications? A: Yes, MIC5209-4.2BS is designed for low-power applications and offers excellent efficiency and low quiescent current.

  8. Q: Can MIC5209-4.2BS operate in a wide temperature range? A: Yes, MIC5209-4.2BS is designed to operate in a wide temperature range, typically from -40°C to +125°C.

  9. Q: Does MIC5209-4.2BS have any built-in protection features? A: Yes, MIC5209-4.2BS includes built-in protection features such as thermal shutdown and current limit protection.

  10. Q: Are there any recommended PCB layout guidelines for using MIC5209-4.2BS? A: Yes, it is recommended to follow the manufacturer's PCB layout guidelines to ensure proper performance and stability of the IC.