Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC5216YMM
詳細を表示 DataSheets

MIC5216YMM

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Voltage Regulator
  • Characteristics: Low Dropout, High Current, Adjustable Output
  • Package: 8-Pin MSOP (Mini Small Outline Package)
  • Essence: Regulates voltage to provide a stable output for electronic devices
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 2.3V to 16V
  • Output Voltage Range: 1.25V to 15V
  • Dropout Voltage: 120mV at 150mA load current
  • Output Current: Up to 500mA
  • Quiescent Current: 75µA typical
  • Line Regulation: 0.04% typical
  • Load Regulation: 0.1% typical
  • Ripple Rejection: 70dB typical
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The MIC5216YMM has the following pin configuration:

  1. GND (Ground)
  2. VIN (Input Voltage)
  3. VOUT (Output Voltage)
  4. BYP (Bypass Capacitor)
  5. NC (No Connection)
  6. NC (No Connection)
  7. EN (Enable)
  8. FB (Feedback)

Functional Features

  • Low dropout voltage allows for efficient regulation even with small input-output differentials.
  • High output current capability enables powering a wide range of electronic devices.
  • Adjustable output voltage provides flexibility in various applications.
  • Excellent line and load regulation ensures stable output under varying conditions.
  • Good ripple rejection minimizes noise interference in the output.

Advantages and Disadvantages

Advantages: - Low dropout voltage improves efficiency. - High output current capability allows for versatile applications. - Adjustable output voltage provides flexibility. - Good line and load regulation ensures stable output. - Compact MSOP package saves board space.

Disadvantages: - Limited maximum input voltage range (up to 16V). - Dropout voltage may not be suitable for ultra-low power applications.

Working Principles

The MIC5216YMM is a voltage regulator that uses a PNP pass transistor to regulate the output voltage. It operates by comparing the feedback voltage (FB pin) with a reference voltage, and adjusts the pass transistor accordingly to maintain a stable output voltage. The enable pin (EN) can be used to turn the regulator on or off.

Detailed Application Field Plans

The MIC5216YMM is commonly used in various electronic devices and systems, including but not limited to:

  1. Battery-powered devices: Portable electronics, handheld instruments, etc.
  2. Automotive applications: Infotainment systems, navigation devices, etc.
  3. Industrial equipment: Sensors, control systems, etc.
  4. Communication devices: Wireless routers, modems, etc.
  5. Consumer electronics: Audio/video equipment, gaming consoles, etc.

Alternative Models

Here are some alternative models that offer similar functionality:

  1. LM1117-ADJ: Adjustable Voltage Regulator, TO-220 package
  2. LT1763-3.3: Low Dropout Regulator, SOT-223 package
  3. TPS79633: High Current Voltage Regulator, DFN package
  4. ADP3339: Low Quiescent Current Regulator, SOT-23 package

These alternatives can be considered based on specific requirements and application constraints.

Word count: 310 words

技術ソリューションにおける MIC5216YMM の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC5216YMM in technical solutions:

  1. Q: What is MIC5216YMM? A: MIC5216YMM is a low-dropout (LDO) voltage regulator IC that provides a stable output voltage for various electronic devices.

  2. Q: What is the input voltage range of MIC5216YMM? A: The input voltage range of MIC5216YMM is typically between 2.3V and 16V.

  3. Q: What is the output voltage range of MIC5216YMM? A: The output voltage range of MIC5216YMM can be adjusted from 1.5V to 15V using external resistors.

  4. Q: What is the maximum output current of MIC5216YMM? A: The maximum output current of MIC5216YMM is 500mA, which makes it suitable for powering small to medium-sized loads.

  5. Q: Is MIC5216YMM suitable for battery-powered applications? A: Yes, MIC5216YMM is designed to operate efficiently with low dropout voltage, making it ideal for battery-powered applications.

  6. Q: Does MIC5216YMM have built-in thermal protection? A: Yes, MIC5216YMM incorporates thermal shutdown circuitry to protect itself from overheating.

  7. Q: Can MIC5216YMM handle input voltage fluctuations? A: Yes, MIC5216YMM has excellent line and load regulation characteristics, allowing it to handle input voltage fluctuations effectively.

  8. Q: Can I use MIC5216YMM in automotive applications? A: Yes, MIC5216YMM is automotive-grade and can withstand the harsh operating conditions found in automotive environments.

  9. Q: Does MIC5216YMM require external capacitors for stability? A: Yes, MIC5216YMM requires input and output capacitors to ensure stability and proper operation.

  10. Q: Can I use MIC5216YMM in space-constrained designs? A: Yes, MIC5216YMM is available in a small form factor (8-pin MSOP package), making it suitable for space-constrained designs.

Please note that these answers are general and may vary depending on the specific application and requirements.