MIC5236-3.0BM-TR

Product Overview

Category

MIC5236-3.0BM-TR belongs to the category of voltage regulators.

Use

It is commonly used to regulate and stabilize voltage in electronic circuits.

Characteristics

• Input Voltage Range: 2.5V to 16V
• Output Voltage: 3.0V
• Maximum Output Current: 150mA
• Dropout Voltage: 200mV
• Low Quiescent Current: 120µA
• Package Type: SOT-23
• Operating Temperature Range: -40°C to +125°C

Package and Quantity

MIC5236-3.0BM-TR is available in a SOT-23 package. It is typically sold in reels containing a specified quantity of units.

Specifications

The specifications for MIC5236-3.0BM-TR are as follows:

• Input Voltage Range: 2.5V to 16V
• Output Voltage: 3.0V
• Output Current: Up to 150mA
• Dropout Voltage: 200mV (typical)
• Quiescent Current: 120µA (typical)
• Line Regulation: 0.05% (typical)
• Load Regulation: 0.1% (typical)
• Ripple Rejection: 70dB (typical)
• Thermal Shutdown Protection: Yes
• Short Circuit Protection: Yes

Pin Configuration

MIC5236-3.0BM-TR has the following pin configuration:

```

---

| | --| VIN GND |-- --| VOUT EN |-- |___________| ```

• VIN: Input Voltage
• GND: Ground
• VOUT: Output Voltage
• EN: Enable Pin

Functional Features

• Low dropout voltage ensures efficient regulation even with low input-output differentials.
• Low quiescent current minimizes power consumption in standby or idle modes.
• Thermal shutdown protection prevents the device from overheating.
• Short circuit protection safeguards the regulator and connected components.

Advantages and Disadvantages

Advantages

• Wide input voltage range allows for versatile applications.
• Low quiescent current prolongs battery life in portable devices.
• Small package size enables space-saving designs.
• Thermal and short circuit protection enhance reliability.

Disadvantages

• Limited output current may not be suitable for high-power applications.
• Dropout voltage may cause a significant voltage drop in low input-output differential scenarios.

Working Principles

MIC5236-3.0BM-TR is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage, adjusting the pass transistor accordingly to maintain a stable output voltage. The enable pin can be used to turn the regulator on or off.

Application Field Plans

MIC5236-3.0BM-TR finds applications in various electronic systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Automotive electronics - Medical equipment

Alternative Models

Some alternative models that offer similar functionality to MIC5236-3.0BM-TR include: - LM1117-3.3 - LT1763-3.3 - MCP1703-3.3

These alternatives can be considered based on specific requirements and design constraints.

In conclusion, MIC5236-3.0BM-TR is a voltage regulator with a wide input voltage range, low quiescent current, and thermal and short circuit protection. It is commonly used in various electronic systems that require stable and regulated voltage outputs.