MIC5247-1.85YML-TR belongs to the category of voltage regulators.
This product is commonly used in electronic circuits to regulate and stabilize voltage levels.
The specifications for MIC5247-1.85YML-TR are as follows:
The pin configuration of MIC5247-1.85YML-TR is as follows:
MIC5247-1.85YML-TR operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The enable pin allows for easy control of the regulator's operation.
MIC5247-1.85YML-TR finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wireless communication devices - Battery-powered IoT devices
Some alternative models that can be considered as alternatives to MIC5247-1.85YML-TR are: - LM1117-1.8 (Texas Instruments) - MCP1700-1802E/TO (Microchip Technology) - LT1763CS8-1.8 (Analog Devices) - TPS79318DBVR (Texas Instruments)
These alternatives offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements and design considerations.
In conclusion, MIC5247-1.85YML-TR is a voltage regulator with a fixed output voltage of 1.85V. It offers efficient voltage regulation, low quiescent current, and various protection features. This product finds applications in a wide range of electronic devices and has alternative models available in the market.
Sure! Here are 10 common questions and answers related to the application of MIC5247-1.85YML-TR in technical solutions:
Q1: What is MIC5247-1.85YML-TR? A1: MIC5247-1.85YML-TR is a specific model of voltage regulator IC (integrated circuit) manufactured by Microchip Technology. It is designed to provide a stable output voltage of 1.85V.
Q2: What are the key features of MIC5247-1.85YML-TR? A2: Some key features of MIC5247-1.85YML-TR include low dropout voltage, low quiescent current, thermal shutdown protection, and overcurrent protection.
Q3: What is the typical application of MIC5247-1.85YML-TR? A3: The typical application of MIC5247-1.85YML-TR is as a voltage regulator in various electronic devices and systems where a stable output voltage of 1.85V is required.
Q4: What is the input voltage range for MIC5247-1.85YML-TR? A4: The input voltage range for MIC5247-1.85YML-TR is typically between 2.5V and 20V.
Q5: What is the maximum output current of MIC5247-1.85YML-TR? A5: The maximum output current of MIC5247-1.85YML-TR is typically 150mA.
Q6: How does MIC5247-1.85YML-TR achieve low dropout voltage? A6: MIC5247-1.85YML-TR achieves low dropout voltage by utilizing a PNP pass transistor architecture.
Q7: What is the quiescent current of MIC5247-1.85YML-TR? A7: The quiescent current of MIC5247-1.85YML-TR is typically 35µA.
Q8: Does MIC5247-1.85YML-TR have thermal shutdown protection? A8: Yes, MIC5247-1.85YML-TR has built-in thermal shutdown protection to prevent overheating and damage.
Q9: Can MIC5247-1.85YML-TR handle overcurrent situations? A9: Yes, MIC5247-1.85YML-TR has overcurrent protection to safeguard against excessive current flow.
Q10: What are some potential applications where MIC5247-1.85YML-TR can be used? A10: Some potential applications for MIC5247-1.85YML-TR include battery-powered devices, portable electronics, IoT (Internet of Things) devices, and various low-power systems requiring a stable 1.85V voltage supply.
Please note that the answers provided here are general and may vary depending on specific datasheet specifications and application requirements.