Microchip Technology
画像はイメージの場合もございます。
商品詳細は仕様をご覧ください。
MIC5249-2.5BMM
詳細を表示 DataSheets

MIC5249-2.5BMM

Product Overview

Category

MIC5249-2.5BMM belongs to the category of voltage regulators.

Use

It is commonly used to regulate voltage in electronic circuits.

Characteristics

  • Low dropout voltage
  • High output accuracy
  • Low quiescent current
  • Thermal shutdown protection

Package

MIC5249-2.5BMM is available in a miniature 8-pin MSOP package.

Essence

The essence of MIC5249-2.5BMM lies in its ability to provide stable and regulated voltage output for various electronic applications.

Packaging/Quantity

This product is typically packaged in reels or tubes, with quantities varying based on customer requirements.

Specifications

  • Input Voltage Range: 2.3V to 5.5V
  • Output Voltage: 2.5V
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 35µA (typical)
  • Output Current: Up to 150mA
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

  1. EN (Enable): Enable pin for turning the regulator on/off.
  2. GND (Ground): Ground reference for the regulator.
  3. FB (Feedback): Feedback pin for setting the desired output voltage.
  4. VOUT (Output Voltage): Regulated output voltage.
  5. BYP (Bypass): Bypass capacitor connection for improved stability.
  6. NC (No Connection): No electrical connection.
  7. VIN (Input Voltage): Input voltage supply.
  8. VIN (Input Voltage): Input voltage supply.

Functional Features

  • Low dropout voltage ensures efficient regulation even with small input-output differentials.
  • High output accuracy provides precise voltage regulation for sensitive electronic components.
  • Low quiescent current minimizes power consumption during standby or idle modes.
  • Thermal shutdown protection prevents damage due to excessive temperature.

Advantages and Disadvantages

Advantages

  • Compact size and package make it suitable for space-constrained applications.
  • Wide input voltage range allows compatibility with various power sources.
  • Excellent line and load regulation characteristics ensure stable output under varying conditions.

Disadvantages

  • Limited output current may not be sufficient for high-power applications.
  • Higher cost compared to some other voltage regulators in the market.

Working Principles

MIC5249-2.5BMM operates based on the principle of linear voltage regulation. It uses a pass transistor to regulate the output voltage by adjusting the resistance between the input and output terminals. The feedback mechanism compares the output voltage with a reference voltage, and any deviation is corrected by adjusting the pass transistor's resistance. This ensures a constant and accurate output voltage.

Detailed Application Field Plans

MIC5249-2.5BMM finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - Industrial control systems - Medical equipment - Automotive electronics

Detailed and Complete Alternative Models

  1. MIC5205-2.5YM5: Similar voltage regulator with adjustable output voltage.
  2. LP2985-2.5DBVR: Low dropout voltage regulator with fixed 2.5V output.
  3. LT1761ES5-2.5#TRMPBF: High-performance LDO regulator with 2.5V fixed output.

These alternative models offer similar functionality and can be considered as alternatives to MIC5249-2.5BMM based on specific application requirements.

Word count: 514 words

技術ソリューションにおける MIC5249-2.5BMM の適用に関連する 10 件の一般的な質問と回答をリストします。

Sure! Here are 10 common questions and answers related to the application of MIC5249-2.5BMM in technical solutions:

  1. Q: What is MIC5249-2.5BMM? A: MIC5249-2.5BMM is a low-dropout (LDO) voltage regulator IC manufactured by Microchip Technology. It provides a regulated output voltage of 2.5V with a maximum output current of 150mA.

  2. Q: What are the typical applications of MIC5249-2.5BMM? A: MIC5249-2.5BMM is commonly used in various electronic devices such as battery-powered systems, portable devices, industrial control systems, and automotive applications.

  3. Q: What is the input voltage range for MIC5249-2.5BMM? A: The input voltage range for MIC5249-2.5BMM is typically between 2.5V and 16V.

  4. Q: What is the dropout voltage of MIC5249-2.5BMM? A: The dropout voltage of MIC5249-2.5BMM is typically around 200mV at a load current of 150mA.

  5. Q: How does MIC5249-2.5BMM handle thermal protection? A: MIC5249-2.5BMM incorporates thermal shutdown circuitry that protects the device from excessive temperature. When the junction temperature exceeds a certain threshold, the regulator shuts down to prevent damage.

  6. Q: Can MIC5249-2.5BMM operate in a wide temperature range? A: Yes, MIC5249-2.5BMM is designed to operate in a wide temperature range, typically from -40°C to +125°C.

  7. Q: Does MIC5249-2.5BMM require any external components for operation? A: Yes, MIC5249-2.5BMM requires a few external components such as input and output capacitors for stability and filtering.

  8. Q: What is the quiescent current of MIC5249-2.5BMM? A: The quiescent current of MIC5249-2.5BMM is typically around 35µA.

  9. Q: Can MIC5249-2.5BMM handle short-circuit conditions? A: Yes, MIC5249-2.5BMM has built-in current limit protection that allows it to handle short-circuit conditions without damage.

  10. Q: Is MIC5249-2.5BMM available in different package options? A: Yes, MIC5249-2.5BMM is available in various package options such as SOT-23, DFN, and MSOP, providing flexibility for different PCB layouts and space constraints.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.